Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Archives

Home / Articles posted by cniacs (Page 374)
June 6, 2025 BY
IN GE

Fanuc IC670TBM001 Auxiliary terminal block


The Field Control IC670TBM001 Auxiliary Terminal Block is an auxiliary terminal block manufactured by GE Fanuc.

It provides additional terminals for analogue and high-density discrete I/O modules.

It also provides additional ground, return, or common connections. It comes with 9 barrier type terminals.

Each terminal accepts 1 or 2 AWG #14 gauge wire with a 2.1 mm2 cross section.

It can also be used to provide additional terminals for the shield during field wiring.

The IC670TBM001 Auxiliary Terminal Block’s connection point connection provides enough locations to easily terminate two wires from discrete I/O devices on the control panel.

The IC670TBM001 auxiliary terminal block can be connected to a properly installed DIN rail.

During installation, be sure to install the I/O terminal block first before inserting the auxiliary terminal block into the DIN rail.

The auxiliary terminal mounting lugs are positioned on the right side of the DIN rail.

During field wiring, the chassis ground of any module can be connected to the ground terminal of the auxiliary terminal block.

For 3-wire or 4-wire transmitters, an additional terminal strip with IC670TBM001 auxiliary terminal block must be used.

The module terminals are electrically connected together from the inside. If additional common terminals are required for efficient field wiring.

This optional terminal strip is an optimal solution for field control systems.

It can be connected as an additional device to the side of the I/O terminals in the field control station.
June 6, 2025 BY
IN GE

Fanuc IC670TBM002 Auxiliary I/O Terminal Block

The GE Fanuc IC670TBM002 terminal block is an auxiliary I/O terminal block for devices in the GE Field Control product line, such as field control I/O modules.

The IC670TBM002 auxiliary I/O terminal block is typically used as an additional terminal block for I/O systems that require high-density discrete I/O modules and analogue modules.

It can also be used to make additional connections such as common connections, return connections and additional ground connections.

All terminals on the IC670TBM002 auxiliary I/O terminal block are internally and electrically interconnected.

Auxiliary I/O terminal blocks such as this one connect to the side of the host I/O terminal block, and they have panel-mounting feet that allow them to be mounted on a panel.

The GE Fanuc Field Control IC670TBM002 Auxiliary I/O Terminal Block has box-type terminals instead of the barrier-type terminals found on other auxiliary I/O terminals.

Its panel-mounting feet not only allow it to be panel-mounted, but also help it and its host device meet product vibration specification ratings, because they are as stable as possible during operation.

They also help it and its host device meet the product’s vibration specification ratings because they hold the Auxiliary I/O Terminal and its host device as stable as possible during operation.

The IC670TBM002 Auxiliary I/O Terminal Block can be field wired using instrumentation-grade shielded twisted-pair wire.

This wire is recommended because of its high noise immunity rating.
June 6, 2025 BY
IN ABB

ABB MNS iS motor control center system overview Function module concept

MNS iS system overview

Function module concept

MNS iS motor control center solution delivers

all the functions for control, protection and

monitoring of the motors and motor starters

using software and hardware modules for the

specific tasks. Right information is provided to

the right people at the right time.

Hardware modules are designed to fulfill desired

tasks (power module containing electrical parts

e.g. to isolate power, control module containing

software applications etc. to control a motor).

System functions are provided as functional

modules to be downloaded to the control module.

Only required functions are downloaded while

others are available as options.

System functionality may be enhanced at any

time without the requirement for additional

hardware or wiring.

Time synchronization with a time server in the

plant or locally in the switchboard allows accurate

time stamps of alarms and events collected in the

control module.

Module and location supervision are available

as a standard. These functions ensure the

corresponding power and control modules are

installed to the correct location for the particular

motor/feeder application.
June 6, 2025 BY
IN ABB

ABB MNS iS motor control center system overview

MNS iS system overview

MNS iS – Value inside

High protection and safety

MNS iS and its clear segregation of power and

control compartments offers highest personal,

system and supervision safety possibilities.

Standardization

Maximum simplicity due to standardized power

modules – fully assembled and ready to use for

a wide range of motor starter and energy

distribution modules.

Lower lifecycle costs

These are defined in three ways; less downtime,

less fault finding and less inventory.

Information variety

MNS iS offers latest HMI technology, remote

management, innovative plug and produce

technology and real time plant condition

monitoring.

Complete solution

ABB offers the possibility to provide an all in

one solution when MNS iS is used in conjunction

with other power and automation technologies from ABB.
June 6, 2025 BY
IN Foxboro

Foxboro P0973LK 24-GIGABIT RJ-45 PORT MANAGED SWITCH

OVERVIEW

The 24-Gigabit (RJ-45) Port managed switches

(P0973LK) provide 20 10/100/1000Base-TX Gigabit

ports and four (4) combo ports 10/100/1000Base-TX

or SFP ports that can be populated with 1000Base-X

Mini-GBIC uplink (ISL) connector modules. If an SFP

port is populated with a Mini- GBIC then the

corresponding 1000Base-TX copper port cannot be

used.

The switches allow high-performance, full-featured

layer-2 Ethernet switching in small to medium-sized

network applications.

FEATURES

The 24-Gigabit RJ-45 port managed switch features:

 20 10/100/1000Base-TX Gigabit ports

configurable as 1G uplink ports

 Four (4) optional 10/100/1000Base-TX or SFP(2)

1000Base-X Mini-GBIC ports for uplink (ISL)

connector modules

 SFP(2) ports for 1000Base-X Mini-GBIC uplink

(ISL) connector modules

 Full-duplex operation

 Configuration tasks through a local console port,

and monitoring through any SNMP/RMON based

management application

 Port mirroring technology and diagnostics that

allow local network traffic to be redirected to an

external probe for detailed analysis

 When installed with the optional redundant power

supply, there is no single point of failure due to

power disruptions.
June 6, 2025 BY
IN Foxboro

Foxboro P0973KJ 26-GIGABIT (SFP) PORT MANAGED SWITCH

OVERVIEW

The 26-Gigabit (SFP) Port managed switch

(P0973KJ) provides 24 modular 1000Base-X Gigabit

(SFP) ports and two (2) SFP+ ports. All 26 ports can

be populated with Mini-GBIC uplink connector

modules listed in Table 4.

24 1000Base-X SFP ports can be populated with the

100Base-FX Mini-GBIC (P0973JE) module for device

connectivity if the switch is running on firmware

06.61.08.0013 or greater.

The switch allows high-performance, full-featured

layer-2 Ethernet switching in small to medium-sized

network applications. It has been designed to be

utilized as an uplink switch in the control network.

FEATURES

The 26-Gigabit (SFP(1)) Port managed switch

features:

 24 1000Base-X Gigabit (SFP) and two SFP+ports

configurable as 1G (ISL) uplink ports or end

device connectivity

 Full-duplex operation

 Configuration tasks through a local console port,

and monitoring through any SNMP/RMON based

management application

 Port mirroring technology and diagnostics that

allow local network traffic to be redirected to an

external probe for detailed analysis

 When installed with the optional redundant power

supply, there is no single point of failure due to power disruptions
June 6, 2025 BY
IN Foxboro

Foxboro P0973JP 8-PORT COPPER / 8-PORT FIBER MANAGED SWITCH

OVERVIEW

The 8-Port Copper/8-Port Fiber managed switch

(P0973JP) provides eight (8) 100Base-TX ports with

RJ-45 connectors, eight (8) 100Base-FX ports with

MT-RJ connectors, two fixed 10/100/1000 Ethernet

ports and two 1000Base-X uplink (ISL) Gigabit (SFP)

ports.

The two 1000Base-X uplink (ISL) Gigabit (SFP) ports

can be populated with Mini-GBIC uplink (ISL)

connector modules listed in Table 4.

The switch allows high-performance, full-featured

layer-2 Ethernet switching in small to medium-sized

network applications, as well as high-performance

direct end-station connectivity.

FEATURES

The 8-Port Copper/8-Port Fiber managed switch

features:

 8-ports of 100Base-FX (RJ-45)

 8-ports of 100Base-TX

 Two fixed RJ-45 10/100/1000 ports, configurable

for 100Base-Tx or 1000Base-TX for devices or

1000Base-TX for (ISL) uplink ports

 Two 1000Base-X uplink Gigabit (SFP) ports

 MT-RJ connectors on switch 100Mb fiber ports

 Full-duplex operations

 Supports VLAN configurations

 Configuration tasks through a local console port,

and monitoring through any SNMP/RMON based

management application.

 Port mirroring technology and diagnostics that

allow local network traffic to be redirected to an

external probe for detailed analysis

 When installed with the optional redundant power

supply, there is no single point of failure due to power disruptions.
June 6, 2025 BY
IN Foxboro

Foxboro P0973JN 24-PORT FIBER MANAGED SWITCH

OVERVIEW

The 24-Port Fiber managed switch (P0973JN)

provides 24 100Base-FX ports with MT-RJ

connectors, two fixed 10/100/1000 ports and two

1000Base-X uplink (ISL) Gigabit (SFP) ports.

The two 1000Base-X uplink (ISL) Gigabit (SFP) ports

can be populated with Mini-GBIC uplink (ISL)

connector modules listed in Table 4.

The switch allows high-performance, full-featured

layer-2 Ethernet switching in small to medium-sized

network applications, as well as high-performance

direct end-station connectivity.

FEATURES

The 24-Port Fiber managed switch features:

 24 ports of 100Base-FX

 Two fixed RJ-45 10/100/1000 ports, configurable

for 100Base-Tx or 1000Base-TX for devices or

1000Base-TX for (ISL) uplink ports

 Two 1000Base-X uplink Gigabit (SFP) ports

 MT-RJ connectors on switch ports

 Full-duplex operation

 Supports VLAN configurations

 Configuration tasks through a local console port,

and monitoring through any SNMP/RMON based

management application.

 Shelf, desk, or 19-inch rack mounting

 Port mirroring technology and diagnostics that

allow local network traffic to be redirected to an

external probe for detailed analysis

 When installed with the optional redundant power

supply, there is no single point of failure due to power disruptions.
June 6, 2025 BY
IN Foxboro

Foxboro P0973JM 24-PORT COPPER MANAGED SWITCH

OVERVIEW

The 24-Port Copper managed switch (P0973JM)

provides 24 100Base-TX ports with RJ-45

connectors, two fixed 10/100/1000 Ethernet ports

and two 1000Base-X uplink (ISL) Gigabit (SFP) ports.

The two 1000Base-X uplink (ISL) Gigabit (SFP) ports

can be populated with the MGBIC uplink (ISL)

connector modules listed in Table 3.

The switch allows high performance, full-featured

layer-2 Ethernet switching in small to medium-sized

network applications, as well as high performance

direct end-station connectivity.

FEATURES

The 24-Port Copper managed switch features:

 24 ports of 100Base-TX (RJ-45)

 Two fixed RJ-45 10/100/1000 ports, configurable

for 100Base-Tx or 1000Base-TX for devices or

1000Base-TX for (ISL) uplink ports

 Two 1000Base-X uplink Gigabit (SFP) ports

 Full-duplex operation

 Supports VLAN configurations

 Configuration tasks through a local console port,

and monitoring through any SNMP/RMON based

management application.

 Port mirroring technology and diagnostics that

allow local network traffic to be redirected to an

external probe for detailed analysis

 When installed with the optional redundant power

supply, there is no single point of failure due to power disruptions.
June 6, 2025 BY
IN Foxboro

The Foxboro Evo Control Network Ethernet Equipment

OVERVIEW

The control network equipment described in this

document has been tested and qualified for use with

The Foxboro DCS.

The qualified Ethernet switches offered are listed in

Table 1. The qualified Media Converter offered is

listed in Table 2.

FEATURES

 System scalability by interconnecting Ethernet

switches, each having 8-ports or more in various

increments

 Modular uplinks to high-speed backbones using:

• 1000Base-T

• 1000Base-SX

• 1000Base-LX

• 1000Base-LX/LH

• 1000Base-BX

• 1000Base-TX

• 1000Base-ZX standards

 System Management software for monitoring the

health of the control system and managing the

equipment within the system

 Configuration tasks through a local console port

(CLI), and monitoring through any SNMP/RMON

based management application

 Ethernet switches and converters are European

Union (EU) Low Voltage and EMC directives

Menu

Search for products

Back to Top
Product has been added to your cart