Overview

Install your power supply using these installation instructions. The only tools you

require are flat head (1/8”) and Phillips head (1/4”, #2) screwdrivers.

ATTENTION

!

Electrostatic discharge can damage integrated circuits or

semiconductors if you touch backplane connector pins. Follow

these guidelines when you handle the power supplies.

• Touch a grounded object to discharge static potential.

• Do not touch the backplane connector or connector pins.

• Do not touch circuit components inside the power supply.

• Use a static-safe work station, if available.

• Keep the power supplies in their static-shield packaging

when not in use.

Hazardous Location Considerations

Products marked CL1, DIV 2, GP A, B, C, D are suitable for use in Class I, Division

2, Groups A, B, C, D or nonhazardous locations only. Each product is supplied with

markings on the rating nameplate indicating the hazardous location temperature

code. When combining products within a system, the most adverse temperature

code (lowest T number) may be used to help determine the overall temperature

code of the system. Combinations of equipment in your system are subject to

investigation by the local authority having jurisdiction at the time of installation.