The drives operate from AC (120/240 VAC) or DC (20-90 VDC) power supplies and

are rated from 1.5 ARMS continuous to 48 ARMS peak current.

They have a small footprint, ranging from 1.1 inches (28.7 mm) wide

by 6.0 inches (152.4 mm) high to 3.8 inches (94.6 mm) high,

(213 mm) high and from 3.9 inches (100.8 mm) to 7.57 inches (192.4 mm) deep to fit into tight spaces.

They are UL 508C listed, CE marked, and comply with EN50178 and EN61800-3 standards.

The original S200 series contained lead in the solder.

Devices manufactured after November 2007 are fully compliant with the EU RoHS environmental

directive.

RoHS devices all have control logic version 3.0A or later.

A separate ‘hold-activated’ control power input allows communication and

diagnostics to continue without power in the event of an emergency shutdown.

Communication and diagnostics can continue during an emergency stop with

the motor powered down. It also allows for quick recovery from an emergency stop.

Optically isolated inputs and outputs, positive locking connectors and

full failsafe protection ensure long machine life and resistance to accidental damage.

Single motor power or feedback cable options simplify connections.

All connectors and LED status indicators are easily accessible from the front of the drive.