Application

The FEC26 controllers are partofthe Metasys® system

Field Equipment Controller (FEC) family. These

controllers run pre-engineered and user-programmed

applications and provide the inputs and outputs required

to monitor and control a wide variety of HVAC and other

facility equipment.

The FEC controllers operate on an RS-485 BACnet®

MS/TP Bus as BACnet Application Specific Controllers

(B-ASCs) and integrate into Johnson Controls® and

third-party BACnet systems.

The FEC26 controller is available with or without an

integral LCD and push button user interface.

The N2-capable FEC Family Controllers can be used as

functional replacements for legacy N2 controllers. The

N2-capable FEC Family Controllers:

• havethe input and output (I/O) quantities and

characteristics of the FEC Family Controllers

• mustbeprogrammed with CCT, which has similar,

but not identical programming capabilities as

HVACPro, GX9100. GPL, and other legacy tools

• support SA Bus devices

• areavailableinBuyAmericanversions(mostmodels)

• arelisted for UL864 UUKL/UUKLC (some models).

N2is supported as part of the Metasys® 10th Edition

listing for Smoke Control System Equipment.

The N2-capable FEC family controllers:

• donotsupport Zone Bus (for example, TMZ sensors

and M100actuators) or XT-Bus (System 91) devices

(for example, XT, XTM, and XP modules)

• donotsupport a wireless connection to the N2 bus

• donotsupport NxE passthrough