Checks Upon Actuator Receipt

• Check that the model, the serial number of the actuator and the technical

data reported on the identification plate correspond with those of order

confirmation (Section 1.2).

• Check that the actuator is equipped with the fittings as provided for by

order confirmation.

• Check that the actuator was not damaged during transportation: if necessary

renovate the painting according to the specification reported on the

order confirmation.

• If the actuator is received already assembled with the valve, its settings have

already been made at the factory.

• If the actuator is delivered separately from the valve, it is necessary to check,

and, if required, to adjust, the settings of the mechanical stops (Section 3.6)

and of microswitches (if any) (Section 3.7).