Features

P80630-SDN:

Single 24-75VDC power supply input required

Bipolar chopper drive for superior current regulation and low ripple current

Conventional Step and Direction interface. User provided pulse train to rotate the motor

Dedicated inputs for Step, Direction (CW/CCW) and Enable

Dip-switch selectable settings. No programming required!

Idle Current Reduction to reduce motor heating during dwell or when holding a load

Microstepping resolution up to 25.600 steps/revolution

Motor Phase Current up to 5.5 Arms/phase to pair with widest range of Kollmorgen motors

Fault Protection:

Thermal Protection (Over-Temperature)

Over-Current

Over/Under Bus Voltage

Short Circuit (Phase-to-Phase or Phase-to-Ground)

CE, RoHS, REACH certified

P80360 Drives:

100-240VAC, single-phase power supply input required.

Dual STO Channels (SIL3/PLe).

Mandatory 24VDC power supplies required to operate the drive.

(-ECE Version) EtherCAT subordinate drive using CANOpen over EtherCAT (CoE) conforming to DS402 standard

Optional Kollmorgen Studio Software (free download in Software tab) for motor setup, parameterization and debugging. EtherCAT Master may be used as well.

(-R4E Version) Programmable drive with Modbus RS485 RTU onboard

Uses Kollmorgen Space Software (free download in Software tab) for motor setup, parameterization and programming

4 Digital Inputs – user programmed

5-24V, PNP/NPN/Line-Driver

3 Digital Outputs – user programmed

24V PNP

Microstepping resolution up to 51.200 steps/revolution

Motor Phase Current up to 3.0 Arms/phase

Closed Loop Position Control capable

5V Incremental AB(Z) Encoder only

Open Loop Stall Detect capable without encoder

Fault Protection:

Thermal Protection (Over-Temperature)

Over-Current

Over/Under Bus Voltage

Short Circuit (Phase-to-Phase or Phase-to-Ground)

UL, CE, RoHS, REACH certified