Scope of delivery

After unpacking check the completeness and intactness of the delivery.

The scope of delivery of “HDK ibaLink-io-embedded“ (order no. 60.700204) includes:

 ibaLink-io-embedded module (order no. 14.132400)

 2nd ibaLink-io-embedded module as test board (modified)

 Ribbon cable (2×22 pin, RM 2.0 mm)

 2 pin cable for power supply

 Data medium “iba Software & Manuals”

Connections

FO interface

The module communicates with compatible devices over the fiber-optic RX and TX in

terface ports. RX realizes the fiber-optic receiver while TX realizes the fiber-optic trans

mitter.

32Mbit Flex mode

32Mbit Flex is the preferred mode for data acquisition applications with ibaPDA. ibaLink

io-embedded has to be configured at least once, see chapter 7 “Software”. The ibaPDA

application reads the configuration and displays the configured signals. The user can

select the signals to be measured and adjust the cycle time. The cycle time can be faster

for small amounts of data, up to 10 μs with 17 Bytes. The maximum amount of data is

4060 Bytes at 1.4 ms. The data format and size can freely be set. The application can

use the complete RX and TX buffer (4060 Bytes).

32Mbit Flex requires a bidirectional FO connection to a card of the ibaFOB-D type for

communication. With 32Mbit Flex, it is possible to connect up to 15 devices in a ring

topology.