Specifications

DH+ to EtherNet/IP™

1/ The operating mode acts as a bridge between an EtherNet/IP and a DH+ network.

• Programming terminals, and/or processors on an EtherNet/IP network can access

legacy processors on a DH+ network

• Download to a PLC5 or SLC through RSLinx

• Configured through web browser

• Supports all DH+ baud rates (57.6. 115.2. and 230.4 K baud).

2/ The operating mode helps the communication between an Ethernet-Based processor

with legacy processors on a DH+ network.

Support gathering data without changing existing PLC or SLC hardware

DH+ to Modbus TCP

This operating mode allows Modbus TCP Clients to access the PLC data from stations on

a Data Highway Plus Network.

• The Modbus TCP server supports up to 128 connections

• Modbus Input and Output Registers are mapped to the PLC/SLC files for each station

• Modbus TCP Unit/Slave ID data is mapped to the Data Highway Plus Station

HMI

This operating mode allows legacy PanelViews to be upgraded to a PanelView Plus 6 or

PanelView Plus 7 via EtherNet/IP.

• No changes to PLC code required

• Supports up to 8 PanelViews on the same network.

Drive

This operating mode supports upgrading legacy Allen Bradley drives on Remote I/O to

new EtherNet/IP-enabled drives.

• No changes to PLC code required

• Supports up to 4 EtherNet/IP drives

• Configurable with ¼, ½, and full rack addressing

• Supports all PowerFlex drives on EtherNet/IP.