Product Description

The DI 32 01 is a module with 32 digital inputs and is used for the modular F60 system. The

inputs are galvanically separated to the I/O bus.

The module can be inserted in the F60 subrack’s slot 3…8. Slots 1 and 2 are reserved for the

power supply module and central module, respectively.

The module has been certified by the TÜV for safety-related applications up to SIL 3

(IEC 61508. IEC 61511 and IEC 62061), Cat. 4 and PL e (EN ISO 13849-1) and SIL 4

(EN 50126. EN 50128 and EN 129).

Further safety standards, application standards and test standards are specified in the

certificates available on the HIMA website.

A fault reaction is triggered if one of the following faults occurs:

 Cross-circuit between two parallel wires.

 Improper connections of two lines (e.g., TO 2 to DI 3).

 Earth fault of a line (with earthed ground only).

 Open-circuit or open contacts, i.e., including when one of the two EMERGENCY STOP

switches mentioned above has been engaged.

The fault reaction includes the following actions:

 The ERROR LED on the controller’s front plate blinks.

 The inputs are set to 0.

 An evaluable error code is created.