SLC Servo Module Operation

The SLC Servo Module, compatible with the SLC family, is used with 

SLC 5/03 FRN 5.0 (and above) processors using RSLogix 500, AI500 or 

APS (version 5.0 or higher) software. Once the SLC processor is 

initiated, the execution of the motion block is independent of the scan 

time of the processor. Blended motion allows for complicated move 

profiles consisting of two to thirty-two segments. The blended move 

profiles are stored in the SLC Servo Module’s memory as a series of 

absolute moves and can be executed more than once. Other move or 

homing operations can be performed between blended move profiles.

The SLC Servo Module controls absolute position over a range of 32 

bits. The SLC Servo Module performs an origin search (also called 

homing) and automatically resets the absolute position to the home 

position when the SLC processor requests a search function after 

detecting one of the following: 

• Encoder marker

• Limit switch

• Limit switch and marker

The SLC Servo Module operates in two modes:

• Configuration 

• Command 

When operating in the configuration or the command mode, the status 

of the module is reported to the SLC processor.