IMPORTANT If you set the value of the adapter switch to 888 and then power cycle

the module, the following occurs:

• The DHCP Enabled function is enabled (set to True).

• The Ethernet link is negotiated automatically. The Auto Negotiate

function is set to True.

• The web server is enabled. The Disabled Web Server function is

disabled.

• The Ethernet ports are disabled. Both ports are re-enabled once the

switches are returned to their previous value and power is cycled.

Enable or Disable the Web Server

Enable Web Server in Static IP mode

1. Set the switches to 000 and cycle power to the adapter.

The module LED flashes red and the four-character status display scrolls

the message “Web Server Enabled”.

2. Set the switches to the desired IP address and cycle power to the adapter.

3. In your web browser, enter the IP address of the adapter.