Measurement

The relay continuously measures high-impedance and neutral currents.

The measured values can be accessed via the local HMI or

remotely via the communication interface of the relay. The

values can also be accessed locally or remotely using the Web HMI.

Disturbance recorder

The relay is provided with a disturbance recorder featuring

preconfigured analog and binary channels.The analog channels

can be set to record either the waveform or the trend of the

currents and voltages measured.

The analog channels can be set to trigger the recording function

when the measured value falls below or exceeds the set values.

The binary signal channels can be set to start a recording either

on the rising or the falling edge of the binary signal or on both.

By default, the binary channels are set to record external or

internal relay signals, for example, the start or trip signals of the

relay stages, or external blocking or control signals. Binary relay

signals, such as protection start and trip signals, or an external

relay control signal via a binary input, can be set to trigger the

recording. Recorded information is stored in a nonvolatile

memory and can be uploaded for subsequent fault analysis.