Introduction

This document is a quick installation guide for the UNITROL1005 automatic

voltage regulator. Make sure that you read and understand this document

before you install or use the product. This document is meant only as a brief

guide to the product. For detailed information on the product, refer to the User 

Manual.

Device description

UNITROL 1005 is an automatic voltage regulator (AVR) for synchronous

machines up to 80MVA. The AVR can be used for the excitation of indirectly

excited synchronous machines and motors. The AVR can also operate as a

reactive power regulator, power factor regulator or field current regulator.

Installation procedure:

1. Refer to Dimensions for the mounting hole dimensions.

2. Make the appropriate holes in the installation plate.

3. Attach the AVR to the installation plate with suitable hardware, for example,

M6 screws to a torque of 10Nm. The mounting holes have a diameter of 6.5mm.

4. Make sure that there is a good electrical ground connection between the

installation plate and the AVR. The installation plate must be electrically grounded (PE).