Archives

Handheld VAV Balancing Tool

The Handheld VAV Balancing Tool lets you set the

parameters for VAV applications that reside on CV series

equipment controllers.

For more information on the Handheld VAV Balancing

Tool, refer to the Handheld VAV Balancing Tool Catalog Page

(LIT-1090348).

Network Sensors

The NS Series Network Sensor offering includes NS Series

Network Zone Sensors and NS Series Network Discharge

Air Sensors. The NS Series Network Zone Sensors are

designed to function directly with the  Metasys equipment

controllers.

For more product application information, ordering

information, and technical specifications, refer to the NS

Series Network Sensors Product Bulletin (LIT-12011574).

WNC1830/ZFR183x Pro Series Wireless Field Bus

System

The WRG1830/ZFR183x Pro (ZFR Pro) Series Wireless Field

Bus System provides a wireless platform for BACnet MS/

TP controllers using BACnet protocol over 2.4 GHz wireless

ISM band. For more information, refer to the WRG1830/

FX-ZFR183x Pro Series Wireless Field Bus System Technical

Bulletin (LIT-12013553).

Related products

For information about the Metasys system and related

products, refer to Metasys System Product Bulletin

(LIT-1201526).

Controller Configuration Tool (CCT)

The CCT is used in conjunction with the  Metasys system

to configure, simulate, and commission equipment

controllers.

For information about using CCT for configuration,

simulation, and commissioning of the equipment

controllers, refer to Controller Configuration Tool (CCT)

Catalog Page (LIT-1900386).

Mobile Access Protocol (MAP) Gateway

The MAP Gateway is a pocket-sized web server that

provides a wireless mobile user interface to SMART

Equipment and Johnson Controls branded equipment

controllers and thermostats.

For more information on the MAP Gateway, refer

to the Mobile Access Portal Gateway Product Bulletin

(LIT-12011884).

Related products

For information about the Metasys system and related

products, refer to Metasys System Product Bulletin

(LIT-1201526).

Controller Configuration Tool (CCT)

The CCT is used in conjunction with the  Metasys system

to configure, simulate, and commission equipment

controllers.

For information about using CCT for configuration,

simulation, and commissioning of the equipment

controllers, refer to Controller Configuration Tool (CCT)

Catalog Page (LIT-1900386).

Mobile Access Protocol (MAP) Gateway

The MAP Gateway is a pocket-sized web server that

provides a wireless mobile user interface to SMART

Equipment and Johnson Controls branded equipment

controllers and thermostats.

For more information on the MAP Gateway, refer

to the Mobile Access Portal Gateway Product Bulletin

(LIT-12011884).

Handheld VAV Balancing Tool

The Handheld VAV Balancing Tool lets you set the

parameters for VAV applications that reside on CV series

equipment controllers.

For more information on the Handheld VAV Balancing

Tool, refer to the Handheld VAV Balancing Tool Catalog Page

(LIT-1090348).

XPM Expansion Modules

Compatibility

XPM series expansion modules can be connected to the

SA Bus of the following equipment controller device types:

• CG series General Purpose Application Equipment

Controllers

• CV series VAV Box Controllers

• FAC series Advanced Application Field Equipment

Controllers

• FEC series Field Equipment Controllers

• VMA16. VMA18. and VMA19 series VAV Box Controllers

• SNC series Network Control Engines

• NCE series Network Control Engines

Note: XPM series expansion modules may coexist on

the SA Bus with IOM series input/output expansion

modules.

XPM series expansion modules can be connected to the

FC bus of the following network engine types:

• SNE series Network Engines

• SNC series Network Control Engines

• NAE35. NIE39. NAE45. NAE49. NAE55. and NAE59 series

Network Automation and Integration Engines

• NCE25 and NIE29 series Network Control Engines

Note: XPM series modules may coexist on the

FC Bus with IOM series input/output expansion

modules.

Preloaded, selectable applications

The CV series VAV box controller is shipped with a

factory-installed library of the most popular VAV box

control applications. You can make this controller fully

operational by using the MAP to select the appropriate

VAV box application, thereby, saving field technicians’

time by eliminating the provisioning workflow.

Optional integrated feedback potentiometer

Reassures users and field technicians of the VAV box

damper’s actual position and enables them to easily

confirm and troubleshoot VAV controller operations,

confirm actuator is at the desired position and track

damper position.

CV installation

Field mounting the CV series controllers is

straightforward. These controllers require minimal wiring

and are mounted to the VAV box using a single sheet

metal screw and a single set screw to lock the actuator

to the damper shaft. The set screw has a self-locking cup

point end to resist loosening due to vibration.

The actuator coupling is serrated, providing additional

damper shaft grip and minimizing shaft slippage during

operation. The coupling accommodates shafts from 10

mm (3/8 in.) square and up to 13 mm (1/2 in.) diameter

round. A gear release lever allows easy resetting of the

damper to fully open or fully closed.

The housing dimensions of the CV series controllers meet

industry mounting requirements and make the controllers

easy to handle.

The controller device address can be unique for each

controller using the rotary switches that are accessible

through the controller housing.

For more information about installing CV controllers,

refer to CVM03050 VAV Terminal Equipment Controllers

Installation Instructions .

CV series features

In addition to the features listed in Features and benefits,

CV series equipment controllers provide the following

benefits:

An integrated damper actuator and digital Differential

Pressure Transducer (DPT) sensor

Reduces installation time

Fast response actuator

Drives the damper from full open to full closed (90°) in 60

seconds to reduce commissioning time

Preloaded, selectable applications

The CV series VAV box controller is shipped with a

factory-installed library of the most popular VAV box

control applications. You can make this controller fully

operational by using the MAP to select the appropriate

VAV box application, thereby, saving field technicians’

time by eliminating the provisioning workflow.

Optional integrated feedback potentiometer

Reassures users and field technicians of the VAV box

damper’s actual position and enables them to easily

confirm and troubleshoot VAV controller operations,

confirm actuator is at the desired position and track

damper position.

VAV Box Controllers (CV Series)

The CV series equipment controllers are designed

for variable air volume (VAV) box applications. These

controllers are fully programmable, but also feature a set

of preloaded applications allowing these controllers to be

made fully operational by selecting the appropriate VAV

box application using the MAP.

CV series controllers feature an integral damper actuator,

and a digital Differential Pressure Transducer (DPT)

sensor. The CVM03050-0P model features an integral

potentiometer to sense actual VAV box damper position.

These controllers include an integral real-time clock,

which enables the controllers to monitor and control

schedules, calendars, and trends, and operate for

extended periods of time as stand-alone controllers

when offline from the Metasys system network. These

controllers also connect easily to the wired and wireless

network sensors for zone and discharge air temperature

sensing.