Overview

Trendmaster Pro is an innovative online vibration monitoring system that links hundreds of

permanently mounted transducers and measurement points to a single-cable sensor network.

It then transmits full-waveform & spectrum data to our System 1 software, with its intuitive

interface for tracking, alerting & analyzing your machinery behavior.

This online condition monitoring system is optimized for cost-effective monitoring of machines

of intermediate criticality, i.e. machines that don’t demand immediate shut-down protection,

but for which monthly portables-based monitoring would be insufficient.

A highlight of this system is its suitability for use in the most hazardous environments (i.e. explosive

gases).

A wide range of sensor types are supported, including vibration (Acceleration, Velocity, Displacement),

temperature (RTD & K thermocouple), Pressure, Process Variables (20mA, 5V), Rack Buffered outputs.

Each Transducer Interface Module provides 2 channels of measurement.

Trendmaster Product Features

The Trendmaster Pro online condition monitoring system is ideal for your medium criticality machines:

Dynamic Scanning Modules – Strategically placed throughout your plant, DSMs accept one to

six sensor bus cables to produce a distributed network of condition monitoring sensors.

Frequently polled – Sensors on each bus are polled sequentially every few minutes,

allowing the system to collect data from thousands of connected sensor points.

Low installation and hardware costs – innovative architecture utilizes point-to-point wiring

rather than running all field wiring all the way back to a central location.