Category: Alfa Laval

Standard design

The Alfa Laval ALT top-mounted agitator consists of a drive

unit with optional bearing frame, free-hanging shaft with

special shaft seal, and one or multiple specially designed

energy-saving impellers (EnSaFoil) with two or three blades.

The Alfa Laval agitator range includes top-, bottom- and side

mounting models.

Working principle

The Alfa Laval ALT top-mounted agitator has an electrical

drive motor that transmits the energy required for mixing and

blending, either directly or via a gearbox, to the agitator shaft.

The shaft rotates, turning the EnSaFoil impellers. The impeller

movement creates a high flow with low shear due to the highly

effective axial pumping effect on the liquid in the tank. This

results in effective mixing and blending of the entire contents

of the tank.

Options

• Welding flange

• Low level impeller

• Stainless steel cover for motor/gear motor

• Spare part kit

• ATEX version

Certification

Alfa Laval Q-doc and ATEX certifications available, depending

on the individual configuration.

Introduction

The Alfa Laval ALT is a top-mounted agitator with free

hanging shaft for hygienic mixing and blending in atmospheric

and pressurized tanks. Its versatile, modular and hygienic

design enables customization to meet the requirements of

virtually any duty and ensures cost-effective, energy-efficient

operation. Exceptional cleanability through Cleaning-in-Place

makes the ALT agitator ideal for use in sterile and aseptic

applications. An ATEX-certified version is available for use in

potentially explosive environments.

Applications

The ALT top-mounted agitator is designed for a wide range of

tank mixing and blending duties across the dairy, food,

beverage, personal care, biotechnology and pharmaceutical

industries.

Benefits

• Versatile, modular, hygienic design

• Can be configured for minimum energy consumption

• Gentle product treatment

• More uptime and higher yields due to low maintenance

requirements

• Meets EU and US standards and regulations such as

EHEDG, USDA, FDA and 3-A Sanitary Standards

Unmatched mixing efficiency and energy savings for

hygienic applications

• Higher mixing efficiency than comparable agitators

• Greater energy savings and smaller carbon footprint due to a unique impeller

design

• Easy to install, operate and maintain

• Safeguard product integrity with superior cleaning efficiency backed by thorough

documentation

Reduce process time and raise process efficiency, product quality and yield for mixing

duties in hygienic applications with Alfa Laval tank agitators. Thanks to the modular

agitator design and unique energy-saving impellers, you can also realize greater energy

savings as well as reduce maintenance costs and waste.

Easy to customize, install, operate and maintain, Alfa Laval agitators maximize uptime,

optimize flow, promote gentle product treatment and are supplied with an extensive

documentation package for validation of hygienic design and cleanliness.

Choose from top-mounted units, with or without bottom support, as well as bottom-

or side-mounted units across the dairy, food, beverage, home-personal care, chemical

and pharmaceutical industries. 

Maximize mixing efficiency while ensuring optimal flow rates and gentle product

treatment with Alfa Laval tank agitators. Versatile designs with options for

customization and mounting enable you to tailor a solution to your exact mixing

requirements in a wide range of hygienic applications. Raise mixing quality,

performance and economy in your tanks to a higher level and lower energy and

maintenance costs with this broad portfolio of purpose-built agitators.

Easy to customize, install, operate and maintain, Alfa Laval agitators maximize uptime,

optimize flow, promote gentle product treatment and are supplied with an extensive

documentation package for validation of hygienic design and cleanliness.

Choose from top-mounted units, with or without bottom support, as well as bottom-

or side-mounted units across the dairy, food, beverage, home-personal care, chemical

and pharmaceutical industries. 

UltraPure tubes

Ensure the highest possible process safety using Alfa Laval UltraPure pharmaceutical tubes.

Compliant with ASME BPE standard, these precision-engineered pharmaceutical aluminum

tubes connect critical process equipment in high-purity applications.

UltraPure tubes comply with global hygienic standards for use in piping systems across the

biotech, pharmaceutical, and personal care industries.

Quality process piping whenever high-purity applications call for extreme

cleanliness

• More uptime due to high-quality surface finishes that promote maximum cleanability

• Minimal cleaning time due to the high-purity welding, material, dimensions, and tolerances

• High process and product integrity due to high quality throughout the manufacturing process

and BPE certification

• Safe, secure operations due to full traceability from certified raw material compliance to

finished product

• Global presence with Alfa Laval offices, partners, and distribution centres worldwide

Meet the highest demands for connecting high-purity equipment with Alfa Laval UltraPure

pharmaceutical tubes. Part of a broad portfolio of high-purity solutions, UltraPure tubes

meet the stringent requirements of the ASME BPE standard, required to connect the piping

systems of bioprocessing equipment. Easy to order, these BPE tubes are backed by solid

customer support and a global organization you can rely on.

Tubes & fittings account for 90% of product contact surfaces in a

typical pharma application – ensure quality with Tri-Clover UltraPure

ASME BPE

• Very low contamination risk – consistent, easy to clean internal surface finishes

(electro or mechanically polished) with Ra of < 0.4 – 0.8μ

• Easy and safe installation – secure, self-aligning joints and smooth, crevice-free,

corrosion-resistant interiors for guaranteed hygiene

• Reliability minimizes risk – incoming and outgoing raw material/product quality

control and close monitoring of manufacturing process

• Integrity secured – tubes from the same material supplier ensure uniformity,

high quality welds and assured chemical composition and passivity state

• Versatile – selection of tubes, bends, unions, clamps, reducers available in a range

of surface finishes and dimensions

Optimize your processes and maximize uptime with Alfa Laval Tri-Clover UltraPure

ASME BPE. Get fast access to replacement parts and service, readily available through

our local offices and more than 1500 sales and working partners around the world.

Whether you require single fittings, boxes, pallets or even containers directly from

the factory, we offer fast and efficient delivery without compromising product quality.

Alfa Laval Tri-Clover UltraPure ASME BPE range includes a comprehensive

selection of tubes and fittings of varying dimensions and executions all

compliant with ASME BPE standards. Made for safe and easy installation,

its high quality and good weldability meet the standards of biopharmaceutical

industries.

Optimize your processes and maximize uptime with Alfa Laval Tri-Clover UltraPure

ASME BPE. Get fast access to replacement parts and service, readily available through

our local offices and more than 1500 sales and working partners around the world.

Whether you require single fittings, boxes, pallets or even containers directly from

the factory, we offer fast and efficient delivery without compromising product quality.

Let Alfa Laval UltraPure pharma fittings ensure superior safety, cleanliness,

traceability, product quality for your high-purity processes. Meet processing

demands for exceptional flow characteristics, corrosion resistance,

contamination-free welds, and high cleanability with these precision-

engineered fittings. UltraPure biotech fittings comply with global hygienic

standards for use in piping systems across the biotech, pharmaceutical,

and personal care industries.

Connecting high-purity processing lines calls for the highest levels of hygiene,

safety, quality, and installation ease. Part of a broad portfolio of high-purity

solutions, Alfa Laval UltraPure pharma fittings meet stringent requirements,

such as the EN 10357-A and the ASME BPE standards, required to connect the

piping systems of bioprocessing equipment. Easy to order, these BPE fittings

provide maximum cleanability and are backed by a global organization and solid

customer support.

High-purity pharma fittings you can rely on

• Faster cleaning times thanks to high-quality, interior surface finishes

• More uptime thanks to maximum cleanability and contaminant-free weld

quality

• Full traceability from raw material to the finished product

• Highest quality guaranteed in accordance with ASME BPE standards

• Global presence, solid support and service

Connecting high-purity processing lines calls for the highest levels of hygiene,

safety, quality, and installation ease. Part of a broad portfolio of high-purity

solutions, Alfa Laval UltraPure pharma fittings meet stringent requirements,

such as the EN 10357-A and the ASME BPE standards, required to connect the

piping systems of bioprocessing equipment. Easy to order, these BPE fittings

provide maximum cleanability and are backed by a global organization and solid

customer support.

Rely on Alfa Laval hygienic tubes for contaminant-free connections throughout

your hygienic processing systems. For safety, reliability, and efficiency,

choose the wall thickness, interior surface finish and tolerance that meet your

precise requirements from a broad range of stainless steel tubes for standard

duties. All hygienic tubes undergo stringent quality control procedures and meet

global hygienic standards to safeguard process integrity and process quality.

Hygienic tubing at its best – the safety, hygiene, quality and availability

you need

• Faster cleaning times thanks to high-quality, interior surface finishes

• More uptime thanks to high weld quality and smooth surface finishes

• Enhanced safety due material tested according the EN 10204 3.1 standard

• Exceptional performance with compliance to ISO 9001 quality management standards

• Easy access to and fast delivery from strategically located global distribution centres

Let Alfa Laval hygienic tubes raise productivity and control costs by ensuring hygienic

connections throughout your processing lines. To optimize process flow rates, choose

from a broad portfolio of tubes and fittings with smooth, crevice-free design, superior

corrosion-resistance, and secure, self-aligning joints. Easy to order, these come in the

surface finishes, uniform wall thicknesses, tight tolerances, and global standards that

your processes require. Available worldwide, they are backed by Alfa Laval’s global

presence and local service and support.