Category: Honeywell

The Satellite XT is the simple solution for all “Point-of-Use” gas detection needs.

Based upon the market’s smallest and most reliable electrochemical cell technology,

the Satellite XT offers flexibility, simplicity and ease of application.

The Satellite XT can be purchased in either an analogue or digital configuration,

allowing it to interface with new or existing facility control technologies.

The digital Satellite XT is built on LonWorks® tech nology. Life safety systems

built on a LonWorks® network platform allow users to leverage the cost efficiencies

of distributed controls, while maintaining the integrity and reliability necessary for

code compliant safety applications.

The Satellite XT is an intelligent gas detection transmitter which utilises a unique

electrochemical sensor to detect toxic, corrosive, and combustible gas.

The Satellite XT is a “Point-of-Use” monitor normally located at or near a potential

source of gas release. Field accessories allow sampling options for various environments

including in–situ duct detection and extractive designs for harsh or remote areas.

Typical installations for gas detection sampling include gas cabinet exhaust ducting,

valve manifold boxes, equipment enclosures and ambient breathing zones.

Each digital Satellite XT transmitter bears a unique address for use on a LonWorks®

network. This feature allows it to participate in a community of other intelligent

LonWorks® devices, which when considered together, comprise a life safety system network.

Gas concentration and alarm information are both displayed locally at the Satellite XT, as

well as distributed onto the LonWorks® network for use by other field devices.

The Satellite XT provides complete programmability of all monitoring variables

including gas type, alarm levels, and maintenance status.

FEATURES AND HIGHLIGHTS

COMMUNICATION

• Supports BACnet IP  or BACnet MSTP bus for communication.

• BTL-listed, IP VAV: B-BC profile and MSTP VAV: B-AAC profile

(BTL certification in process).

• BACnet IP enables faster download, thereby reducing commissioning

time, and increased data bandwidth for increased data sharing

compared to traditional BACnet MSTP communication.

• BACnet IP variants supports:

• IPv4 addressing

• DHCP and Link Local addressing modes

• Connection speed: 10/100 Mbps

• Modbus client for integration purposes.

• Automatic addressing functionality.

• Sylk™ bus two-wire polarity insensitive interface connects to

Honeywell Sylk™ wall modules without using physical I/O points.

• Integrated BLE (Bluetooth)

ALL-IN-ONE

• Freely programmable in WEBs-N4.

• Compact design for small enclosures and easy to install on round ducts.

• Color-coded, removable terminal blocks to simplify wiring

and replacement.

• Real-time clock, a supercapacitor for 24-hour data retention.

• 24 VAC power supply.

• 20 VDC at 75 mA auxiliary supply for field devices.

• Seven universal inputs/outputs usable as analog voltage/current

output or as a universal/binary input.

• All UI can be used for pulse input.

Maximum frequency 100 Hz, Minimum duty cycle (50 % / 50 %) 5

ms ON / 5 ms OFF.

• Five 24 VAC solid state relay outputs with 1.5 A continuous and 3.5

A in rush for 100 ms per SSR output.

• Features a non-isolated RS-485 interface for Modbus communication.

WEB-8000 controllers are compact embedded IoT (Internet of Things) devices

and server platforms for connecting multiple diverse devices and subsystems.

With internet connectivity and web-serving capability, WEB-8000 controllers

provide integrated control, supervision, data logging, alarming, scheduling,

and network management. They stream data and rich graphical displays to

a standard web browser via an Ethernet or wireless LAN, or remotely over

the internet.

The licensing model for the WEB-8000 controller is simplified and features

standard drivers along with optional I/O and fieldbus expansion modules

for ultimate flexibility and expandability. WEB-8000 controllers operate

with WEBs-N4™, the latest version of the Niagara Framework®, for

optimum performance. WEBs-N4 supervisors can be used with WEB-8000

controllers to aggregate information in larger facilities, multi-building

applications, and large-scale control system integrations. This includes 

real-time data, history and alarms, to create a single unified application.

Features & Benefits:

• Can be used as an access point or client thanks to Wi-Fi connectivity

• Easily access the licenses and stations needed to replace bad hardware

controllers on your Micro SD card

• Flexible capacitive licensing allows for competitive pricing

• 1 GHz processor with 1 GB RAM and 4 GB flash storage means faster

processing and more space

• USB flash drive backs up and stores stations

• Part numbers are now based on devices and points instead of resources

• Includes standard drivers (BACnet®, LON, Modbus, SNMP, and KNX)

Certifications:

• UL 916

• CE EN 61326-1

• FCC Part 15 Subpart B, Class B

• FCC Part 15 Subpart C

• C-UL listed to Canadian Standards Association (CSA)

• C22.2 No. 205-M1983 “Signal Equipment”

• 1999/5/EC R&TTE Directive

• CCC

• SRRC

• RSS

• RoHS

ALL-IN-ONE

• Freely programmable in WEBs-N4.

• Compact design for small enclosures and easy to install on round ducts.

• Color-coded, removable terminal blocks to simplify wiring

and replacement.

• Real-time clock, a supercapacitor for 24-hour data retention.

• 24 VAC power supply.

• 20 VDC at 75 mA auxiliary supply for field devices.

• Seven universal inputs/outputs usable as analog voltage/current

output or as a universal/binary input.

• All UI can be used for pulse input.

Maximum frequency 100 Hz, Minimum duty cycle (50 % / 50 %) 5

ms ON / 5 ms OFF.

• Five 24 VAC solid state relay outputs with 1.5 A continuous and 3.5

A in rush for 100 ms per SSR output.

• Features a non-isolated RS-485 interface for Modbus communication.

ACTUATOR

• Integrated 44 in-lbs (5 Nm) actuator with 90 sec runtime at 60 Hz

(108 sec at 50 Hz) with position feedback.

PRESSURE SENSOR

• Field replaceable differential pressure sensor (± 500 Pa; accuracy

+/- 3 % of full range).

MOBILE APPLICATION

Mobile app for VAV balancing with easy access to the controller via

Bluetooth integrated in the controller.

• Easy pairing without the need to open the ceiling.

• Supports Android and iOS.

• Language support: English, French, Spanish, German, Italian.

• Wireless signal strength indication.

• Password protection

• Supports different types of balancing (min/max, set-point).

• Command individual / group of VAV, e.g. open a group of VAV dampers.

• Provides a report on balancing activities.

Honeywell’s Spyder™ Model 7 VAV controller is a programmable

room controller with integrated actuator and air flow sensor.

As a freely programmable VAV controller with universal inputs

and outputs, Spyder™ Model 7 has configuration flexibility to

achieve a variety of specific applications. Smart engineering and

commissioning tools with Niagara WEBs-N4 workbench and a

mobile application for test and balance make installation cost

effective.

Spyder™ Model 7 offers BACnet IP or BACnet MSTP, Sylk™ bus

technology, Modbus RTU RS-485. flexible universal input / output

(UIO) points and solid-state relays.

MOBILE APPLICATION

Mobile app for VAV balancing with easy access to the controller via

Bluetooth integrated in the controller.

• Easy pairing without the need to open the ceiling.

• Supports Android and iOS.

• Language support: English, French, Spanish, German, Italian.

• Wireless signal strength indication.

• Password protection

• Supports different types of balancing (min/max, set-point).

• Command individual / group of VAV, e.g. open a group of VAV dampers.

• Provides a report on balancing activities.

Description

PVBxxxxAS-E is provided with more compact size and

accurate air flow measurement to meet the control of

the increasing demand for VAV terminals. It

communicates with BACnet MS/TP, fully compatible

with Niagara WEBs AX and WEBs N4 system.

PVBxxxxAS-E is a free programmable VAV controller,

assembled with a DP sensor for air-flow measurement

and a damper actuator for damper position adjustment.

Features

• Compact design to meet small enclosure

• Low air speed measureable by high accuracy DP sensor

• 5 Nm damper actuator, ease and stable to mount

with damper of VAVBox

• BACnet MS/TP communication between

controllers, up to 115. 2 kps

• Sylk™ Bus communication with wall module,

polarity insensitive wiring for both power supple

and communication

• Compatible with Niagara AX or N4

• Colorful and removable terminal blocks to simplify

wiring and replacement

• Qualified CE, UL, BTL

• BACnet qualified by BTL

EFFICIENCY AND SAFETY ON SITE

• ISA/IEC 62443-4-2 Security Level 2 Certified Component supporting cyber security best practice

• Multi-color LEDs to show the operational status of the isolated RS-485 communications, HMI

device, Ethernet connection, and Service state of the controller.

• Built-in advanced diagnostics software facilitating troubleshooting for IP and MS/TP devices.

• Protective end covers to protect the touch flakes.

• Ferroelectric RAM (FRAM) to store the live data for the controller, including storing the last known

values when power is removed.

• UTF-8 and UCS-2 character encoding formats are supported.

• Ubuntu Core OS with snap container based modular software design (Cyber Secure).

• Supports 802.1x network authentication protocol as a Client (supplicant). Requires Niagara

N4.12 or later. Providing an IT standard security authentication method for network access.

• Processor featuring Neural Net Accelerator for future development of low latency AI/ML

algorithms at the Edge.

EASY UPGRADE

• All RS-485 ports support Panel Bus, BACnet™ MS/TP, Modbus RTU, and M-Bus.

• Removable terminal blocks with screw (factory installed) or Push-in terminals.

• Built-in Web server with HTML5 to support graphics.

FEATURES AND HIGHLIGHTS

SIMPLE AND FLEXIBLE

ENGINEERING

• N-ADV-112-H, N-ADV-133-H, N-ADV 134-H controllers have multiple RS-485 ports and Ethernet ports – one isolated

IP port and multiple switched IP ports. Refer to the “Ordering Information” on page 2.

• N-ADV-133-H-BW series controller has three RS-485 ports and four Ethernet ports – one isolated IP port, three

switched IP ports with Bluetooth™, and Wi-Fi communication.

• RJ11 port to connect with an HMI device for field operations.

• Touch flakes to support RS-485 IO module devices.

• The multiple switched IP ports on the 133 & 134 models support both Daisy chain operation and RSTP

(Rapid Span Tree Protocol) which allows a fault tolerant network to be created.

• Built-in RSTP switch (Rapid Span Tree Protocol) allowing loop-free forwarding network topology.

• i.MX 8M Plus, quad Arm® Cortex®-A53 processor, long life industrial grade, Frequency: 1.2 GHz.

• Supports BACnet™/SC configuration within the Niagara Framework®.

• Conforms to BACnet™ Standard ANSI/ASHRAE 135 protocol version 1.15 (ISO 16484-5).

EFFICIENCY AND SAFETY ON SITE

• ISA/IEC 62443-4-2 Security Level 2 Certified Component supporting cyber security best practice

• Multi-color LEDs to show the operational status of the isolated RS-485 communications, HMI

device, Ethernet connection, and Service state of the controller.

• Built-in advanced diagnostics software facilitating troubleshooting for IP and MS/TP devices.

• Protective end covers to protect the touch flakes.

• Ferroelectric RAM (FRAM) to store the live data for the controller, including storing the last known

values when power is removed.

• UTF-8 and UCS-2 character encoding formats are supported.

• Ubuntu Core OS with snap container based modular software design (Cyber Secure).

• Supports 802.1x network authentication protocol as a Client (supplicant). Requires Niagara

N4.12 or later. Providing an IT standard security authentication method for network access.

• Processor featuring Neural Net Accelerator for future development of low latency AI/ML

algorithms at the Edge.