Category: Honeywell

THE LCBS CONNECT SYSTEM IS PROVIDED “AS IS”

WITHOUT WARRANTY OF ANY KIND. FURTHER,

HONEYWELL DOES NOT WARRANT, GUARANTEE, OR

MAKE ANY REPRESENTATIONS REGARDING THE USE,

OR THE RESULTS OF THE USE OF THE LCBS CONNECT

SYSTEM IN TERMS OF CORRECTNESS, ACCURACY,

RELIABILITY, SECURITY, TIMELINESS, OR OTHERWISE.

THE ENTIRE RISK AS TO THE RESULTS AND

PERFORMANCE OF THE LCBS CONNECT SYSTEM IS

ASSUMED BY THE CONTRACTOR, END-USER, AND

OWNER. IF THE LCBS CONNECT SYSTEM IS DEFECTIVE

OR INOPERATIVE, THE CONTRACTOR, END-USER, AND

OWNER, AND NOT HONEYWELL ASSUMES THE ENTIRE

COST OF ALL NECESSARY SERVICING, REPAIR OR

CORRECTION. THE CONTRACTOR, END-USER, AND

OWNER AGREE TO COMPLY WITH ALL INDUSTRY AND

HONEYWELL STANDARDS WITH RESPECT TO

CYBERSECURITY. HONEYWELL DISCLAIMS ALL

WARRANTIES INCLUDING WITHOUT LIMITATION,

IMPLIED WARRANTIES OF NON-INFRINGEMENT,

MERCHANTABILITY, TITLE AND FITNESS FOR A

PARTICULAR PURPOSE.

UNDER NO CIRCUMSTANCES WILL HONEYWELL BE

HELD LIABLE FOR ANY HARM RESULTING FROM

DOWNLOADING OR ACCESSING ANY INFORMATION OR

MATERIAL THROUGH THE LCBS CONNECT SYSTEM, ANY

DELAY OR FAILURE IN PERFORMANCE RESULTING

DIRECTLY OR INDIRECTLY FROM ACTS OF NATURE,

FORCES OR CAUSES BEYOND ITS REASONABLE

CONTROL, INCLUDING, BUT NOT LIMITED TO, INTERNET

FAILURES, COMPUTER EQUIPMENT FAILURES,

TELECOMMUNICATION EQUIPMENT FAILURES, OTHER

EQUIPMENT FAILURES, WIRING, INTERNET SERVICE

PROVIDERS, MOBILE DEVICE CARRIERS, SATELLITE

PROVIDERS, ELECTRICAL POWER FAILURES, SECURITY

BREACHES, STRIKES, LABOR DISPUTES, RIOTS,

INSURRECTIONS, CIVIL DISTURBANCES, SHORTAGES

OF LABOR OR MATERIALS, FIRES, FLOODS, STORMS,

EXPLOSIONS, ACTS OF GOD, WAR, GOVERNMENTAL

ACTIONS, ORDERS OF DOMESTIC OR FOREIGN COURTS

OR TRIBUNALS, NON-PERFORMANCE OF THIRD

PARTIES, OR LOSS OF OR FLUCTUATIONS IN HEAT,

LIGHT, OR AIR CONDITIONING.

There can be no assurances whatsoever that the LCBS

Connect System will protect any individual or his or her

property from harm. Appropriate safety precautions must

always be taken and experienced installers and operators

must be utilized when installing, setting up, operating or

maintaining any building systems. Incorrect processes

may result in property loss, severe injury, or death.

Honeywell assumes no responsibility or liability for any

injury or damage to any persons or property resulting

from the use of the LCBS Connect System.

The LCBS Connect Wall Module is a Sylk bus

communicating device which is exclusively compatible

with the LCBS Connect controller. It contains integral

temperature and humidity sensors to control any given

space’s comfort. This device enables local controller

configuration through an easy-to-use touch screen

interface with menu driven selections. The wall module

communicates and is powered by the Sylk bus, so no

additional wiring is necessary.

The LCBS Connect™ controller and wall module

combination is designed to control constant volume

air handling units and heat pumps. With the embedded

control logic and integral temperature humidity sensors,

it controls the space temperature in a given zone by

regulating the heating and cooling equipment to deliver

conditioned air to that space. The LCBS Connect gateway

serves as the communication device between a building

site and the Honeywell cloud, providing contractors with

a way to remotely monitor, control, and configure

Honeywell building controllers from Honeywell’s LCBS website.

Features & Benefits:

• Monitor and troubleshoot light commercial buildings from

anywhere at anytime

•  Operate more efficiently by remotely

diagnosing problems and providing preventive maintenance

• Handle issues before your customers are even aware of them

• Grow customer satisfaction and retain service contracts

• The efficiencies let you service more buildings without adding

staff

• The ideal solution for all your light commercial customers

The TR70 Series wall modules include:

• Ability to control tenant access to controller

parameters via password protection.

• Ability to assign labels for enumerated values.

• Customized parameter access, by using the Honeywell

WEBs-AX Workbench tool.

• Ability to link setpoint limits to a network variable.

• Programmable for: Home screen options, tenant

access, contractor access, optional password

protection to contractor mode, access to controller

parameters, setpoint, override, fan, and other

parameters.

• Ability to access and adjust most parameters in the

programmable controller.

• TR75 can access and adjust the controller schedule.

• Ability to balance the VAV system from the wall

module.

• Home screen can display one to three of any of the

following parameters: Temperature Setpoint, Room

Temperature, Room Humidity, Outdoor Humidity,

Outdoor Temperature, and Time, or one of virtually any

parameter in the controller.

• Network bus jack.

• Simple 2-wire terminal connection to the

programmable controller (includes power) and an

optional 2-wire terminal connection for the network. All

connections are polarity insensitive.

• Permanent retention of user configuration, including

setpoints after a power outage.

The TR71/TR75 Series are 2-wire, non-polarity sensitive, Sylk™ bus

communicating wall modules for use with Honeywell programmable

controllers. All models have a space-temperature sensor, network

bus jack, and an LCD panel with three soft keys and two Up/Down

adjustment keys.

Features & Benefits:

• TR75 can access and adjust the controller schedule.

• TR75 has ability to balance the VAV system from the wall module.

• Home screen can display one to three of any of the following parameters:

Temperature Set point, Room Temperature, Room Humidity,

Outdoor Humidity, Outdoor Temperature, and Time, or one of virtually

any parameter in the controller.

• Network bus jack.

Certifications:

• CE

• UL

• FCC

REDUCED COSTS

The TR20 family of wireless sensors makes a huge impact on the

material and labor costs of every job, reducing them significantly.

The material costs are clear — you won’t need to keep buying wire

for every job, and you also won’t need to keep materials on hand

for patching walls and repairing trim damage. The savings in labor

are even more significant. All the time spent pulling wires, dealing

with unforeseen obstructions and more is gone. The sensors

are wireless. And the connection of the receiver to the controller

is painless. You’ll not only save time, but you’ll be able to add

business by taking on more jobs.

• No Field Configuration — The sensor and receiver are

shipped together as a kit, so you never have to worry about

having the wrong pairing. Just in case, dip switches let you pair

any sensor to any receiver.

• Easy Installation — Just put up the wall module and wire

the receiver to the controller, and communication starts

automatically.

• Signal Strength Indicator — An LED indicator on the sensor

lets you know immediately if the RF signal is strong, eliminating

guesswork.

• Up To 7.5-Year Battery Life — Lowers your maintenance

costs. (7.5 years with Lithium, 5 years with Alkaline, provided)

conTRollER compaTibiliTy

Choosing the perfect Honeywell controller for the application

won’t be a problem, because the TR20 family works with just

about everything:

– All Spyder controllers

– Excel 10 W7750. W7751. W7752 and W7753 controllers

– T7350. T7351 thermostats

– Other various non-Honeywell controllers

– Does not work with TB8220. TB7220 thermostats or XL15

• Inventory Savings — Because of the compatibility, just two

kits take care of nearly all your wireless sensor needs.

• Excellent Range — With a typical range of 100 feet and an

open air range of 3.000 feet, the TR20 family will work perfectly

for most applications.

• Application Flexibility — In addition to controller compatibility,

you’ll also have the flexibility of choosing sensor-only or override

and push button models.

Enjoy reduced labor and material costs when you go wireless with Honeywell TR20

wireless sensors. In both new and retrofit applications, the TR20 family integrates

seamlessly with a wide range of controllers, adding fully programmable building

automation control — without the hassles and costs of wires and conduits. Labor

time is greatly reduced, and sensor relocation is now a breeze. From vintage hotels

and historical buildings to modern office facilities, the point-to-point solution of TR20

wireless wall modules provides precision control that saves costs while preserving

the building’s appearance.

Add the point-to-point solution of TR20 wireless wall modules

and receivers to the flexible programming of many Honeywell

controllers, and you’ll meet the demand for energy-efficient,

accurate control without the time and cost of wiring. You’ll

save time and money while improving performance, and that’s

outstanding for everyone’s bottom line.

DIFFERENTIATION

• Very wide temperature range allows for years of reliable

performance in the harshest of conditions

• MIL-PRF-8805 qualified listings

• Operating forces as low as 0.06 N [6 g] and differential travel

as low as 0.025 mm [0.001 in] delivers consistent, precise

switch characteristics

FEATURES

• Industry-leading mechanical life of up to 10.000.000 operations

• Selection of actuation, electrical termination, and operating

characteristics along with high-temperature construction options

• Wide temperature range of -54°C to 204°C [-65°F to 400°F]

• MIL-PRF-8805 qualified listings in a lightweight, small package

• FAA-PMA approvals for commercial aircraft

• Choice of silver or gold-plated, or gold bifurcated contacts to

handle a variety of electrical load requirements

• UL/CSA, cUL, ENEC, and CE approvals

VALUE TO CUSTOMERS

• Industry-leading life cycle rating reduces the need to

replace switches over life in an OEM platform – reducing

total system cost

• Low operating forces

• Mil-qualified listings

• Life of up to 10.000.000 cycles

DESCRIPTION

The industry-defining name in snap-action switches,

Honeywell MICRO SWITCH premium subminiature switches

are designed for repeatability and enhanced product life. The

MICRO SWITCH SM Series delivers consistent performance

within a range of conditions.

The MICRO SWITCH SM Series’ small size and light weight are

combined with ample electrical capacity, precision operation,

and extended life. Featuring high precision and repeatability,

the SM Series offers gold contacts for low-energy switching

and gold bifurcated contacts for maximum reliability.

Bifurcated contacts provide parallel redundancy within the SM

switch.

The SM switch is available for power-duty switching up to 11 A

(Vac) or 1/4 HP (Vac).

POTENTIAL APPLICATIONS

• Precision switch assemblies for commercial aircraft to

monitor doors for “closed” and “locked” position

•  Landing gear monitor

•  Precision switch assemblies for commercial cockpit

applications for pushbuttons, toggle, or joystick assemblies

•  Precision switch assemblies in military applications

• Assemblies for industrial pressure switches and temperature

switches

• Power generation fuel level (gas and oil)

PORTFOLIO

The SM Series of premium subminiature basic switches are

a part of a strong offering of submins including SX Series

(premium) and ZM, ZM1. ZD, ZX, and ZW Series (standard) switches.

Warranty/Remedy

Honeywell warrants products manufactured by it to be free from defects

in material and workmanship for the applicable warranty period.

Honeywell’s standard product warranty applies unless otherwise agreed to in writing by Honeywell;

For specific warranty details, refer to your order confirmation or consult your local sales office.

If the warranted product is returned to Honeywell during the warranty period,

Honeywell will, at its sole discretion, repair or replace, free of charge, the product that Honeywell deems

to be defective.

The foregoing is Buyer’s exclusive remedy and is in lieu of all other warranties, express or implied,

including the following warranties

merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for

consequential, special or indirect damages.

Honeywell may provide application assistance in person, through our materials and through Honeywell

websites.

and Honeywell websites for application assistance, but it is the sole responsibility

of the buyer to determine the suitability of the product for the application.

Specifications are subject to change without notice.

As of this writing, the information we have provided is believed to be accurate and reliable.

However, Honeywell assumes no responsibility for its use.

ORTFOLIO

The 91MCE series is part of the 14CE, 914CE, NGC, SZLVL-S, SSCE and SL1 series of miniature limit

switches.

Honeywell also offers a range of MICRO SWITCH heavy duty limit switches and general purpose limit

switches.

Features

– Direct-acting contacts designed to open NC contacts when touched

– Sealing class IP67; NEMA 1. 4. 12. 13 for outdoor applications

– CE, UKCA, cULus, CCC approvals meet most global certification requirements

– Nine actuator styles provide design flexibility

– Slow-action and fast-action circuit options

– Reserved cable and M12 connector options

– Mechanical life expectancy: 5 million operations

– Side exit (standard) and bottom exit connection options

Side outlet (standard) and bottom outlet connection options

– Mechanical equipment

– Material handling

– Aerial lift trucks

– Forklift trucks

– Off-road and outdoor equipment