Category: Johnson Controls

Provides fire alarm control unit status information at locations distant from

the fire alarm control panel. Stay in control of your fire alarm system with

local annunciation of up to 12.000 points on your network.

Simplex Remote Annunciators deliver emergency, trouble, and other event

notification from monitored points on an LCD or optional full-color touch

screen display.

• Remote fire alarm control unit status and control keep users informed and

in charge

• Microphone and firefighter master telephone improve communication

and emergency response

• Choose either an LCD or color touch screen display

Take Control Remotely

Remote Annunciator Panels are dedicated-purpose transponders that support

fire alarm system status information. They are typically used when the host fire

alarm control panel is located away from the area where those responding to a

fire situation need status information. Remote annunciators allow firefighters to

access information and take control of the fire detection system. When equipped

with an optional remote microphone and emergency voice/alarm communications

system control, operators can play prerecorded emergency messages, tones,

or make live broadcasts into selected areas or globally across the system.

Annunciators can include remote master firefighter telephones. These allow

annunciator users to connect with remote firefighter phone call-in requests and

enable firefighter phone callers to be connected to each other. Although intended

for use in assisting fire responders, these phones are also helpful during system

setup and testing.

Delivering Addressable Technology

The Simplex 4100ES is designed to handle complex facility requirements with ease.

It brings fully addressable technology for both initiating and notification circuits and

scalable design flexibility to medium and large facilities and multi-building campus

networks. Supporting up to 3.000 addressable points, the 4100ES is networkable,

offers system-wide voice notification/audio capability that is UL 2572 listed for

Emergency Communications purposes, and is listed for multi-hazard suppression

release control. An optional, large, color touch screen display provides a wealth

of information and an intuitive, easy-to-use interface.

Features

• Full addressability:The 4100ES enables you get all the benefits of addressability

with TrueAlarm addressable sensors and TrueAlert ES notification appliances

and speakers.

• Emergency Voice Communication:Get enhanced safety and emergency response

with integrated voice communication.

• Suppression release support:The 4100ES is agency-listed for multi-hazard

suppression release applications.

• Intuitive interface:The ES touch screen display makes operation and accessing

system logs easy.

• Network data, audio, and firefighter telephones: Connect the 4100ES and other

Simplex control units together and to the TrueSite Workstation graphical

management console using ES Net.

• Future-proof design: Simplex control units can be easily upgraded to the

latest technology.

Addressable fire alarm control unit for large facilities and campuses

The fully networkable Simplex 4100ES supports up to 3.000 points and is

designed to handle the complex requirements of medium/large facilities

and multi-building campus networks. It features addressable technology,

scalable design flexibility, audio capability and is listed for multi-hazard

suppression release control.

• A perfect, addressable solution for large buildings, campuses, and applications

requiring voice evacuation

• High-speed, IP-based networking supports advanced data, voice, and firefighter

telephone communication

• Forward/backward compatibility protects your investment and makes it easy to

keep current with the latest technology

Delivering Addressable Technology

The Simplex 4100ES is designed to handle complex facility requirements with ease.

It brings fully addressable technology for both initiating and notification circuits and

scalable design flexibility to medium and large facilities and multi-building campus

networks. Supporting up to 3.000 addressable points, the 4100ES is networkable,

offers system-wide voice notification/audio capability that is UL 2572 listed for

Emergency Communications purposes, and is listed for multi-hazard suppression

release control. An optional, large, color touch screen display provides a wealth

of information and an intuitive, easy-to-use interface.

Handheld VAV Balancing Tool

The Handheld VAV Balancing Tool lets you set the

parameters for VAV applications that reside on CV series

equipment controllers.

For more information on the Handheld VAV Balancing

Tool, refer to the Handheld VAV Balancing Tool Catalog Page

(LIT-1090348).

Network Sensors

The NS Series Network Sensor offering includes NS Series

Network Zone Sensors and NS Series Network Discharge

Air Sensors. The NS Series Network Zone Sensors are

designed to function directly with the  Metasys equipment

controllers.

For more product application information, ordering

information, and technical specifications, refer to the NS

Series Network Sensors Product Bulletin (LIT-12011574).

WNC1830/ZFR183x Pro Series Wireless Field Bus

System

The WRG1830/ZFR183x Pro (ZFR Pro) Series Wireless Field

Bus System provides a wireless platform for BACnet MS/

TP controllers using BACnet protocol over 2.4 GHz wireless

ISM band. For more information, refer to the WRG1830/

FX-ZFR183x Pro Series Wireless Field Bus System Technical

Bulletin (LIT-12013553).

Related products

For information about the Metasys system and related

products, refer to Metasys System Product Bulletin

(LIT-1201526).

Controller Configuration Tool (CCT)

The CCT is used in conjunction with the  Metasys system

to configure, simulate, and commission equipment

controllers.

For information about using CCT for configuration,

simulation, and commissioning of the equipment

controllers, refer to Controller Configuration Tool (CCT)

Catalog Page (LIT-1900386).

Mobile Access Protocol (MAP) Gateway

The MAP Gateway is a pocket-sized web server that

provides a wireless mobile user interface to SMART

Equipment and Johnson Controls branded equipment

controllers and thermostats.

For more information on the MAP Gateway, refer

to the Mobile Access Portal Gateway Product Bulletin

(LIT-12011884).

Related products

For information about the Metasys system and related

products, refer to Metasys System Product Bulletin

(LIT-1201526).

Controller Configuration Tool (CCT)

The CCT is used in conjunction with the  Metasys system

to configure, simulate, and commission equipment

controllers.

For information about using CCT for configuration,

simulation, and commissioning of the equipment

controllers, refer to Controller Configuration Tool (CCT)

Catalog Page (LIT-1900386).

Mobile Access Protocol (MAP) Gateway

The MAP Gateway is a pocket-sized web server that

provides a wireless mobile user interface to SMART

Equipment and Johnson Controls branded equipment

controllers and thermostats.

For more information on the MAP Gateway, refer

to the Mobile Access Portal Gateway Product Bulletin

(LIT-12011884).

Handheld VAV Balancing Tool

The Handheld VAV Balancing Tool lets you set the

parameters for VAV applications that reside on CV series

equipment controllers.

For more information on the Handheld VAV Balancing

Tool, refer to the Handheld VAV Balancing Tool Catalog Page

(LIT-1090348).

XPM Expansion Modules

Compatibility

XPM series expansion modules can be connected to the

SA Bus of the following equipment controller device types:

• CG series General Purpose Application Equipment

Controllers

• CV series VAV Box Controllers

• FAC series Advanced Application Field Equipment

Controllers

• FEC series Field Equipment Controllers

• VMA16. VMA18. and VMA19 series VAV Box Controllers

• SNC series Network Control Engines

• NCE series Network Control Engines

Note: XPM series expansion modules may coexist on

the SA Bus with IOM series input/output expansion

modules.

XPM series expansion modules can be connected to the

FC bus of the following network engine types:

• SNE series Network Engines

• SNC series Network Control Engines

• NAE35. NIE39. NAE45. NAE49. NAE55. and NAE59 series

Network Automation and Integration Engines

• NCE25 and NIE29 series Network Control Engines

Note: XPM series modules may coexist on the

FC Bus with IOM series input/output expansion

modules.

Preloaded, selectable applications

The CV series VAV box controller is shipped with a

factory-installed library of the most popular VAV box

control applications. You can make this controller fully

operational by using the MAP to select the appropriate

VAV box application, thereby, saving field technicians’

time by eliminating the provisioning workflow.

Optional integrated feedback potentiometer

Reassures users and field technicians of the VAV box

damper’s actual position and enables them to easily

confirm and troubleshoot VAV controller operations,

confirm actuator is at the desired position and track

damper position.

CV installation

Field mounting the CV series controllers is

straightforward. These controllers require minimal wiring

and are mounted to the VAV box using a single sheet

metal screw and a single set screw to lock the actuator

to the damper shaft. The set screw has a self-locking cup

point end to resist loosening due to vibration.

The actuator coupling is serrated, providing additional

damper shaft grip and minimizing shaft slippage during

operation. The coupling accommodates shafts from 10

mm (3/8 in.) square and up to 13 mm (1/2 in.) diameter

round. A gear release lever allows easy resetting of the

damper to fully open or fully closed.

The housing dimensions of the CV series controllers meet

industry mounting requirements and make the controllers

easy to handle.

The controller device address can be unique for each

controller using the rotary switches that are accessible

through the controller housing.

For more information about installing CV controllers,

refer to CVM03050 VAV Terminal Equipment Controllers

Installation Instructions .

CV series features

In addition to the features listed in Features and benefits,

CV series equipment controllers provide the following

benefits:

An integrated damper actuator and digital Differential

Pressure Transducer (DPT) sensor

Reduces installation time

Fast response actuator

Drives the damper from full open to full closed (90°) in 60

seconds to reduce commissioning time

Preloaded, selectable applications

The CV series VAV box controller is shipped with a

factory-installed library of the most popular VAV box

control applications. You can make this controller fully

operational by using the MAP to select the appropriate

VAV box application, thereby, saving field technicians’

time by eliminating the provisioning workflow.

Optional integrated feedback potentiometer

Reassures users and field technicians of the VAV box

damper’s actual position and enables them to easily

confirm and troubleshoot VAV controller operations,

confirm actuator is at the desired position and track

damper position.

VAV Box Controllers (CV Series)

The CV series equipment controllers are designed

for variable air volume (VAV) box applications. These

controllers are fully programmable, but also feature a set

of preloaded applications allowing these controllers to be

made fully operational by selecting the appropriate VAV

box application using the MAP.

CV series controllers feature an integral damper actuator,

and a digital Differential Pressure Transducer (DPT)

sensor. The CVM03050-0P model features an integral

potentiometer to sense actual VAV box damper position.

These controllers include an integral real-time clock,

which enables the controllers to monitor and control

schedules, calendars, and trends, and operate for

extended periods of time as stand-alone controllers

when offline from the Metasys system network. These

controllers also connect easily to the wired and wireless

network sensors for zone and discharge air temperature

sensing.