Category: Johnson Controls

CG and CV Series Equipment Controllers

The CG and CV series equipment controllers are versatile

equipment controllers designed to monitor, control,

and integrate a wide variety of HVAC and other building

equipment. CGM controllers support BACnet® MS/

TP and N2 communication protocols, and auto-detect

which protocol is connected to it. In MS/TP mode, these

equipment controllers are BACnet network-compliant

devices. Controllers running in N2 mode can be used to

maintain or modernize sites with installed legacy Johnson

Controls® controllers.

The CG and CV series equipment controllers feature an

advanced design that provides optimum performance.

These controllers run pre-engineered and user

programmed applications and provide the I/O required

to monitor and control a wide variety of HVAC equipment.

Switchable Communications Protocols

The Metasys® system FEC Family Controllers and

network sensors communicate using either the standard

BACnetprotocol, based ontheANSI/ASHRAE135-2004.

or the BACnet/IP protocol. The BACnet protocol is a

standard for ANSI, ASHRAE, and the International

Standards Organization (ISO) for building controls.

MostFEC,VMA16.VMA18.andIOMfieldcontrollersare

BTL-listed as BACnet Application Specific Controllers

(B-ASCs). FAC field controllers and the VMA1930 Field

Controller are BTL-listed as BACnet Advanced Application

Controllers (B-AACs).

Release 10.3 and Release Module (RM) 10.2 of the

Controller Configuration Tool (CCT) can be used to switch

the Field Bus communications protocol in supported FEC,

FAC and VMAcontrollers to be either the standard

BACnetMSTPortheN2protocol.Allnewcontrollersuse

BACnet MSTP as the default communications protocol.

Switchable communications protocols in the MSTP

models provide a cost-effective upgrade and

modernization path for customers with existing N2

controllers.

Application

The FEC26 controllers are partofthe Metasys® system

Field Equipment Controller (FEC) family. These

controllers run pre-engineered and user-programmed

applications and provide the inputs and outputs required

to monitor and control a wide variety of HVAC and other

facility equipment.

The FEC controllers operate on an RS-485 BACnet®

MS/TP Bus as BACnet Application Specific Controllers

(B-ASCs) and integrate into Johnson Controls® and

third-party BACnet systems.

The FEC26 controller is available with or without an

integral LCD and push button user interface.

The N2-capable FEC Family Controllers can be used as

functional replacements for legacy N2 controllers. The

N2-capable FEC Family Controllers:

• havethe input and output (I/O) quantities and

characteristics of the FEC Family Controllers

• mustbeprogrammed with CCT, which has similar,

but not identical programming capabilities as

HVACPro, GX9100. GPL, and other legacy tools

• support SA Bus devices

• areavailableinBuyAmericanversions(mostmodels)

• arelisted for UL864 UUKL/UUKLC (some models).

N2is supported as part of the Metasys® 10th Edition

listing for Smoke Control System Equipment.

The N2-capable FEC family controllers:

• donotsupport Zone Bus (for example, TMZ sensors

and M100actuators) or XT-Bus (System 91) devices

(for example, XT, XTM, and XP modules)

• donotsupport a wireless connection to the N2 bus

• donotsupport NxE passthrough

Installation

Follow these guidelines when installing an NAE55:

• Transport the NAE55 in the original container to

minimize vibration and shock damage to the NAE55.

• Verify that all the parts shipped with the NAE55.

The data protection battery and NAE55 ship

together but are packaged separately.

• Do not drop the NAE55 or subject it to physical shock.

• Do not open the NAE55 housing (except the data

protection battery compartment). The NAE55 has

no user-serviceable parts inside.

Parts Included

• one NAE55

• one data protection battery

• one installation instructions sheet

Materials and Special Tools Needed

• four fasteners appropriate for the mounting surface

(M4 screws – Europe, #8 screws – North America)

• two 36 cm (14 in.) or longer pieces of DIN rail for

DIN rail mount applications only

• a small straight blade screwdriver for securing

communication wires in the terminal blocks

North American Emissions Compliance

United States

This equipment has been tested and found to comply with

the limits for a Class A digital device pursuant to Part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when

this equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instruction manual, may cause

harmful interference to radio communications. Operation

of this equipment in a residential area is likely to cause

harmful interference, in which case the user will be

required to correct the interference at his/her own

expense.

Canada

This Class (A) digital apparatus meets all the

requirements of the Canadian Interference-Causing

Equipment Regulations.

Cet appareil numérique de la Classe (A) respecte toutes

les exigences du Règlement sur le matériel brouilleur du

Canada.

Application

The Network Automation Engine (NAE) and Network

Integration Engine (NIE) are Web-enabled,

Ethernet-based, supervisory devices that monitor and

control networks of field-level building automation

devices, HVAC equipment, and lighting. Figure 1

shows a typical NAE55 model.

This document describes how to install MS-NAE55xx-x

and MS-NIE55xx-x model engines, which are referred

to collectively as NAE55 unless specified otherwise.

Parts Included

• one NAE55

• one data protection battery

• one installation instructions sheet

Materials and Special Tools Needed

• four fasteners appropriate for the mounting surface

(M4 screws – Europe, #8 screws – North America)

• two 36 cm (14 in.) or longer pieces of DIN rail for

DIN rail mount applications only

• a small straight blade screwdriver for securing

communication wires in the terminal blocks

Features and Benefits

• UL/NEMAType1EnclosurewithaT-45Keylock—Protects the

unit from environmental hazards and intruders.

• TamperSwitchandLoudAudible Alarm—Alerts building

occupants if the enclosure has been breached.

• FederalInformation Processing Standard (FIPS)-140-2. Level

2 Certified—Specifies that the NAE5510-ER2 components meet

a United States government security standard used to approve

cryptographic modules. The NAE5510-ER2isalsoCommonCriteria

certified.

• UL508aandcUL508aListing for Industrial Control Panels

—Meet stringent quality standard for electronics.

• Optional Two-Way Firewall and Deep Packet Inspection

(DPI)—Offer additional layers of security at the network engine.

• NetworkEngineandFieldControllerareBTLListedatProtocol

Revision (PR) 12—Recognizes that the products have been

independently tested by a recognized BACnet testing organization.

• Pre-BuiltintheFactory—Decreasesfieldset-uptimeandensures

the tested unit is fully functional after installation.

Repair Information

If a component of the NAE5510-ER2 panel fails to operate within its

specifications, contact the Johnson Controls® Repair Center in

Louisville, Kentucky at (502) 671-7312 for assistance.

The NAE5510-ER2 is an ideal solution for sensitive or critical BAS

device applications that require higher levels of security, where low

latency and system integrity are paramount. Financial institutions, federal

agencies, hospitals, and pharmaceutical customers are especially suited

for this product. The engine can serve new and legacy BAS systems,

preserving your current investments without compromising security.

Similar to other NAEs, the NAE-S monitors and controls networks of

field-level building automation devices, including HVAC equipment,

lighting, and security. The NAE-S can serve as either a standard

Metasys®engineonanetworkofotherenginesthat report to a Metasys

Application and Data Server (ADS) or Extended Application and Data

Server (ADX). Or, the NAE-S can be a BACnet® Building Controller

(B-BC) network engine that communicates with a BACnet Operator

Workstation (B-OWS) or a BACnet Advanced Operator Workstation

(B-AWS). With the NAE-S, you can securely connect to any other

network device that is using the same secured communications

mechanism using an external DarkNode® panel. It has built-in

encryption technology under a securely fastened enclosure to provide

for fully secure communications. For client authentication, the network

engine supports RemoteAuthentication Dial-in User Service (RADIUS),

Microsoft® Active Directory, and local Metasys user accounts.

Lastly, the NAE-S network engine can route all Metasys system events

andaudits to asmanyastothreeSyslogUDPexternalloggingservers.

For product application information regarding the use of the

NAE5510-ER2 Secure Control Panel Assembly, refer to the NAE-S

Commissioning Guide (LIT-12012269), available from your local

Johnson Controls® representative.

The NAE5510-ER2 secure control panel subassembly with components

provides real-time energy monitoring and control with built-in cyber

security. This secure panel enclosure contains the NAE-S, a secure

version of the standard Network Automation Engine (NAE) 55 that uses

embedded encryption technology to protect and secure the building

automation system at the endpoint. The engine meets the Federal

Information Processing Standard (FIPS 140-2), Security Level 2. that

specifies the use of a cryptographic module and a tamper-proof housing.

The NAE5510-ER2 is also Common Criteria certified. The enclosure

contains an FEC1611-1 Field Equipment Controller (FEC), power

supplies, and a loud audible alarm.

The NAE5510-ER2 is an ideal solution for sensitive or critical BAS

device applications that require higher levels of security, where low

latency and system integrity are paramount. Financial institutions, federal

agencies, hospitals, and pharmaceutical customers are especially suited

for this product. The engine can serve new and legacy BAS systems,

preserving your current investments without compromising security.

Introduction

The NAE55 is a specific series of network engine

that performs a key role in the Metasys system

architecture. Network engines provide network

management and system-wide control and

coordination over one or more networks of Metasys

equipment controllers, including the following:

• General Purpose Application MS/TP Controllers (CGMs)

• VAV Box Equipment MS/TP Controllers (CVMs)

• Field Equipment Controllers (FECs) and Advanced

Application Field Equipment Controllers (FACs)

• Terminal Equipment Controllers (TECs)

• LN (LonWorks® Network) series equipment controllers

• Legacy Metasys controllers, such as Unitary

(UNT) controllers, Variable Air Volume Assembly

(VMA14xx) controllers, and DX-9100 controllers

• Third-party equipment controllers

Network engines can be networked together

for scaling up on large projects, and they can be

networked with an Application and Data Server

(ADS), an Extended Application and Data Server

(ADX), or an Open Application Server (OAS) for

additional functionality and site unification.

Network engines provide building control

scheduling, alarm and event management, energy

management, data exchange, historical data

storage and management, and custom control logic.