Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Category: Industry Trends

Home / Industry Trends (Page 202)
February 24, 2025 BY
IN GE

GE Multilin 750/760 Feeder Protection System Digital Relay

Feeder Protection System

The 750/760 Feeder Protection System is a digital relay for the management, primary protection and control of distribution feeders.

The relay is easy to use, provides comprehensive protection functions for feeders and backup protection for busbars, transformers and transmission lines, with simple construction and low product life cycle costs.

Key Benefits

– Easy-to-use feeder protection system, supported by an industry-leading suite of software tools

– Accurate built-in metering – eliminates the need for auxiliary metering and reduces costs

– Improved uptime of auxiliary equipment – I/O monitoring

– Reduce troubleshooting time and maintenance costs – IRIG-B time synchronization, event reporting, waveform capture, data logger

– Minimizes replacement time – Drawer construction

– Simplifies testing – Built-in analog capability

– Cost-effective access to information. Supports industry protocols such as DNP and Modbus. Includes an optional 10MB Ethernet port for system integration

– Complete asset monitoring – analog inputs/outputs, full metering (including demand and energy metering)

– Leading-edge technology – flash memory for product field upgrades

– Extended life – optional conformal coating for chemical and humid environments

– Global availability ensures compliance with international norms and standards

Applications

– Primary protection and control of distribution feeders for solidly grounded, high impedance grounded or resonant (Peterson coil) grounded systems

– Busbar blocking/interlocking schemes

– High-speed fault detection for arc-flash mitigation

– Load shedding schemes (bus transfer scheme applications)

– Load shedding schemes based on voltage and frequency elements

– Backup protection for transmission lines, feeders and transformers

– Distributed generation (DG) interconnection protection
February 24, 2025 BY
IN GE

GE General Electric PQM Power Quality Analyzer

Data logger for medium voltage networks, transformers, capacitor banks, generators and motors.

The PQM is ideal when continuous monitoring of three-phase networks is required.

It measures current, voltage, real and reactive power, energy consumption, energy cost, power factor and frequency.

With programmable thresholds and 4 configurable output relays, control functions are available for specific applications.

These functions include simple over/under current or voltage alarms, unbalance alarms, load-related load removal/reset, and capacitor control for power factor correction.

Four digital inputs can be used for status such as breaker position, energy exchange information, etc. for more complex control.

The PQM can be used as a data concentrator for the production plant PLC, integrating process, instrumentation and power requirements.

All monitoring and control parameters can be communicated via 2 RS485 communication ports using the ModBus protocol.

If direct interconnection to the PLC is required, any monitored variable can be output through one of four isolated analog outputs.

Isolated Analog Outputs. Process variables can be measured using the analog inputs. The RS232 communications port on the front panel can be connected to a personal computer for simultaneous access to information by other personnel.
February 24, 2025 BY
IN Emerson

Emerson CSI 6500 Machinery Health Monitor

The CSI 6500 Equipment Condition Monitoring System is fully compliant with API 670 and is designed to protect and monitor critical rotating machinery.

Special features of the system include the ability to integrate data from protection functions into DeltaV and Ovation process automation systems in three simple steps;

Transient analysis with real-time display, logging, pause and playback; and superior PeakVue processing for early detection of bearing and gear damage.

Subrack Configuration:

– The 19″ subrack is used only for the 6 U version of the protection function and the standard 3 U version of the protection function.

– The 19″ subrack is used only for the forecasting function and has a mounting height of 6 U with front or rear sensor connection terminals.

A compact version with a mounting width of 7.5″ is also available.

– Only the 19″/6 U subrack is available for combined protection and forecasting functions.

n The machine monitoring function is fully compliant with API 670.

n Standard 19″/6 U subrack for cabinet mounting

n System design ensures that no more than two channels are affected in the event of a card failure; cards can be replaced during operation

n Internal clock synchronized to the system master clock

n Redundant ModBus connections, TCP or serial connections for integrating the Protection Monitor into third-party control systems.
February 24, 2025 BY
IN Emerson

Emerson CSI 6500 ATG Protection System

Does your budget need more bang for your buck?

What if you could get the benefits of prediction at the cost of protecting your systems? Predictive Intelligence is a key component in improving the availability and reliability of plant assets.

So getting predictive data from your protection system is an important step in understanding and improving the health of your assets.

Emerson’s CSI 6500 ATG protection system features a multifunction card that can be easily reconfigured to take a variety of measurements, including the data needed to provide predictive intelligence.

Predictive Capabilities

Emerson’s CSI 6500 ATG is a standalone machinery protection solution that also allows users to cost-effectively and predictively monitor critical assets with the same system.

Predictive intelligence is key to improving availability and reliability.

The CSI 6500 ATG comes with four reconfigurable cards that capture all required TSI measurements, including predictive data measurements such as the following:

Relative shaft vibration

Absolute shaft vibration

Shell vibration electrodynamic

Shell vibration piezoelectric

Relative displacement

Thrust position

Shell expansion/valve position

Average rod drop

Relative Vibration Hydrodynamic

Hydraulic absolute vibration

Eccentricity

Rotation speed

Key

Temperature

Process Parameters
February 24, 2025 BY
IN ABB

ABB EasyLine Continuous Gas Analyzer EL3020

Detectors with different measurement principles for a wide range of process and emission monitoring applications

Up to five measurement components per gas analyzer

Suitable for measuring flammable gases

Automatic calibration, including pump and valve control

Simplified calibration using air or integrated calibration unit, no test cylinders required

Customizable analog outputs, digital inputs and outputs

Modbus interface

Built-in air inlet (optional)

Simple menu-driven operator interface

Clear text status messages

Configuration of rarely needed functions using the included configuration program

Housing version for 19-inch rack mounting (3 height units, IP20)    

Modular design for easy maintenance

Self-monitoring function indicates when maintenance is required

Measurement technology (analyzers)

The following analyzers are available as options:

– Uras26 infrared photometer for measurement of infrared reactive gas components such as CO, NO, SO2. etc.

– Magnos206 Oxygen analyzer for measurement of O2 or N2

– Caldos27 Thermal conductivity analyzer for measuring binary gas mixtures with different thermal conductivities. Measurement of binary gas mixtures with different thermal conductivities.

e.g. Ar in O2 , H2 in Ar, CH4 in CH4 N2

– Electrochemical oxygen sensors for O2 measurement

Electrochemical oxygen sensors can only be used in combination with the Uras26 infrared photometer. Electrochemical oxygen sensors can only be used in combination with the Uras26 infrared photometer.

Magnos206 Oxygen Analyzer and Caldos27 Thermal Conductivity Analyzer can also be used. Can also be used in conjunction with the Uras26 Infrared Photometer.
February 24, 2025 BY
IN GE

DS200SDCCG5A Drive Control Board

Hardware Tips and Specifications

This SDCC Abbreviated DriveControl Board requires its own series-specific hardware components and specifications in order to achieve its intended series functionality.

The GE Drive Control Board DS200SDCCG5A is equipped with 3 microprocessors and RAM that can be accessed by multiple microprocessors simultaneously.

These microprocessors are assigned to specific tasks within the drive control process, and the microprocessors are fitted with the firmware and hardware required to perform their respective tasks.

For example, a DS200SDCCG5A microprocessor is equipped with processing functions that perform the mathematical calculations involved in the common motor control function.

The DS200SDCCG5A board is also equipped with five EPROM connectors for storing configuration software. Four of the EPROM modules store factory-assigned configuration parameters.

The remaining EPROM module stores configuration parameters assigned by the user or service personnel.

The DS200SDCCG5A board described here also contains connectors and standoffs for connecting Mark V Series Auxiliary Cards.

You can secure these cards with screws inserted into the standoffs and then connect cables from the auxiliary cards to the board.

With these cards, you can connect to a LAN or add signal processing capabilities to the board.

Finally, this DS200SDCCG5A DriveControl Board contains jumpers for configuring the board, however these jumpers are set at the factory and should not be moved to change the behavior of the board.
February 24, 2025 BY
IN ABB

ABB UNITROL® 1000 FLEX System Standard Controller for Synchronous Motors

UNITROL® 1000 FLEX systems are pre-packaged solutions for applications requiring single or dual channel controllers. All systems come standard with the UNITROL® 1020 FULL, utilizing the best solution for the best price and flexible project adjustment limits.

After a quick transition to standard applications, the solution is gathering all the functionality required for excitation systems. The pre-packaged solution allows you to design the excitation system in the most flexible and cost-oriented way.

All versions are designed on a common mechanical basis with various IO and power mode options.

The system is available as a single- or dual-channel UNITROL 1020 FULL device.

By integrating the most complete product in ABB’s excitation portfolio, the standard system is ideally suited for integration into your control cabinet.

UNITROL 1020 FULL Features

All regulation types available: AVR/FCR/PF/VAR/Limiter

Automatic synchronization

MODBUS TCP communication

Rotating diode monitoring (RDM)

Reactive load distribution via RS48

Product Description

With the rapid transition to standard applications, this solution brings together all the functionality required for excitation systems. The pre-packaged solution allows you to design your excitation system in the most flexible and cost-effective way.

All versions are designed on a common mechanical basis and offer different input/output and power supply mode options.

The systems are available as single or dual channel UNITROL1020 FULL devices. By integrating the most complete range of products from ABB’s excitation portfolio, the standard system can be perfectly integrated into your control cabinet.
February 24, 2025 BY
IN ABB

ABB APC03 Series Powerful and Compact Automatic Capacitor Banks

ABB APC03 series is a powerful and compact range of automatic capacitor banks that provide the ideal power factor correction solution for industrial and commercial applications. 

APC03 series is easy to install, operate and service while ensuring exceptional reliability, efficiency and safety. 

The key feature of APC03 series is the CLMD03 power module, the latest evolution of CLMD capacitor.

APC03 series improves the power factor in a wide variety of applications including:

 • Buildings

 • Mining

 • Steel industry

 • Chemical

 • Pulp and paper

 • Cement

 • Plastics

 • Printing

 • Food industry

Exceptional reliability and safety

Reliability and safety are key issues for capacitors. With CLMD capacitor, ABB provides the most reliable, durable and fail-safe dry capacitors on the market. It is the result of a state-of-the-art and unique protection technology.

CLMD03 Power Module and CLMD technology

CLMD03 power module is the latest evolution of CLMD capacitor. 

CLMD03 power module is all-in-one pre-wired power module, which includes capacitor – CLMD03 type, contactor, fuses and discharge resistors. CLMD03 power module provides all advantages of CLMD dry capacitor technology in a compact case,delivering high performance within a small footprint.

CLMD03 power module offers a number of exceptional properties such as: high voltage withstand capability, excellent peak current handling capacity, high capacitancestability, long life even under high electrical stress, very low losses and exceptional reliability 

and safety.
February 24, 2025 BY
IN ABB

ABB Endura AZ20 Oxygen Monitor Combustion Gas Analysis

Advanced design and precision manufacturing

 —robust, long-life probe for process temperatures up to 800 °C (1472 °F)

 —proven cell design from over 50 years experience

 —fast response to process variations

 —stable and accurate oxygen measurement

 Unique integrated auto-calibration system

 —easy compliance for emission monitoring regulation

 —reduced installation costs; eliminates requirement for expensive external calibration panel

 —reduced maintenance costs

 Probe lengths up to 4.0 m (13.1 ft.) and industry-standard flange configurations

 —suitable for a wide range of applications

 —extensive installation options

 Easy cell release

 —fully site-serviceable probe

 —easy access to internal components

 Advanced transmitters

 —easy configuration, monitoring and intuitive HMI

 —HART communications

 —cell performance logging and diagnostics

Introduction

The Endura AZ20 is the latest in a long line of high-quality, combustion gas analyzers from ABB.

The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring.

Probe Lengths up to 4.0 m (13.1 ft.)

A wide range of probe insertion lengths from 0.5 to 4.0 m (1.7 to 13.1 ft.) enable installation to the optimum measuring point for accurate oxygen measurement within the duct; even in the largest flue gas ducts and stacks.

A comprehensive range of mounting flanges provide simple installation when plant-wide standard flanges are required or when replacing existing probes.

The transmitter can be probe- or remote-mounted at distances of up to 100 m (328 ft.), thus providing versatile system options for all applications. The probe-mounted transmitter option provides the lowest cost of installation. However, the remote-mounted transmitter provides flexibility when the operationally ideal probe location does not provide easy access for the user.
February 24, 2025 BY
IN ABB

ABB High Voltage Induction Motors

ABB High Voltage Induction Motors

ABB’s more than 130 years of motor manufacturing experience is the foundation of our industry-leading domain expertise.ABB high voltage induction motors combine the benefits of high reliability, availability and efficiency with customized design options to suit the most demanding industry sectors and applications. Our energy-efficient solutions enable industry to reduce its environmental impact.

ABB’s global support network makes maintenance easy throughout the product lifecycle, helping our customers optimize their cost of ownership. Proven product design and product testing ensure safe operation in the most demanding applications.

Modular motors

High voltage modular design motors offer the most reliable and optimized solution for the wide variability of most industrial applications in safe or explosive hazardous areas.

Power range: up to 23 mw

Voltage range: up to 13.8 kV

Shaft height: 355-1000 (mm)

Number of poles: 2-24

Cooling: IC01.IC31.IC611.IC616.IC666.IC81W, IC86W

Protection: IP23.IP24(W), IP55 to IP66 (Optional)

Operation: DOL, VSD

Operating environment: Safe area, Hazardous area

Core Applications.

Pumps, fans, blowers, compressors, conveyors, mills, propellers

Rib-cooled motors

ABB’s high voltage rib-cooled design motors set the benchmark for the industry, delivering more watts per kilogram than has previously been achieved with rib-cooled motors, which also allows for simple configurability and built-in maintainability.

Standards: IEC/NEMA

Power range: up to 2240 kW / 3000 HP

Voltage range: up to 11.5 kV

Shaft height: IEC 315-560/NEMA 5000-5800

Number of poles: 2-12

Cooling: IC411.IC416 / TEAC, TEFC

Protection: IP55. up to IP66

Operation: DOL, VSD

Operating environment: Safe area, Hazardous area

Core applications.

Pumps, fans, blowers, compressors, hoists, conveyors, extruders, mills, cutting, saws

Menu

Search for products

Back to Top
Product has been added to your cart