Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Category: Industry Trends

Home / Industry Trends (Page 389)
April 7, 2025 BY
IN Advantest

Advantest R3132N One Spectrum Analyzer For Versatile Applications

Basic functions

Basic functions are reinforced so that R3132/3162 can be used in various fields.  For example, the internal automatic calibration function guarantees the total level accuracy of ±1.5dB, level correction factor can be stored in the internal memory, DDS is employed to improve frequency reading accuracy, and frequency span error is lowered to less than 1%.

The R3132/3162 offer wider dynamic range and lower 2nd and 3rd distortion by improving 1dB compression point.

As a result of increasing the sweep repetition cycles by improving the synthesized local oscillator, 20 traces/second (typ.) data rewriting becomes possible, enabling far more real-time waveform measurement.

high speed GPIB increase, the throughput of automatic measurement.

For many applications

For EMI precompliance measurement, 6-dB bandwidth filters for 9kHz, 120kHz and 1MHz as well as QP detector are equipped as standard.  Optional 200Hz narrow RBW filter can be added.

For high-speed time domain measurement function which is indispensable for mobile communications, optional 50µs sweep is effective.

By using the double-screen display function, you can www.cniacs.com specify the rising/falling edge of TDMA waveform and display the magnified image.

The R3132/3162 series spectrum analyzer has ACP and OBW operation function indispensable for evaluating the transmission characteristic of radio system.

With various other functions such as AUTO TUNE, 1Hz resolution frequency counter, dBc/Hz, %AM, and PASS/FAIL test by limit value, the R3132/3162 series can easily perform several types of measurements.

Even for signals which are lower in level than the average noise level, the preamplifier ensures level calibrated, high-accuracy measurement.

For measuring the attenuation characteristic of filters or the frequency characteristic of cables, etc., built-in tracking generator is available as option.  Because the output level can be set in a wide range, it is possible to measure amplifier gain, frequency response, etc.
April 7, 2025 BY
IN Advantest

Advantest R6144 Programmable DC Voltage/Current Generators

The R6144 is precision voltage and current generators ideal for evaluation of precision circuits and parts as well as calibration of temperature controllers.

The units use a time-sharing D/A conversion circuit which provides excellent linearity and stability. Settling time and output noise are greatly reduced for higher reliability, allowing construction of a high throughput measurement system.

GPIB and BCD parallel interfaces are provided as standard features, enabling compatibility with a wide range of host devices such as personal computers, sequencers or general purpose I/O interfaces.

 ■ Up to 32 V/160 mA Voltage, Current Output

 ■ High Resolution (1 µV/100 nA steps)

 ■ High Accuracy Guaranteed For 6 Months: 0.03% (Voltage), 0.035% (Current)

 ■ Low Noise Increases Measurement Reliability: 3 mVp-p, One-Fifth of Previous Models’ Noise Level

 ■ Reduced Settling Time Enables Improvements In www.cniacs.com Throughput: 50 ms, One-Third of Previous Models’ Time

 ■ Built-In 160-Step Memory

 ■ All-Digit Continuous Variable Sweep Function Enables Wider Range of Measurement Applications

 ■ Programs Written For Previous Model (TR6142) Can Be Used Without Modifications
April 7, 2025 BY
IN Advantest

Advantest R6245/6246 DC Voltage/Current Sources/Monitors

■ Synchronized 2-Channel Generation, Measurement

■ Measurement Resolution of 1 µV, 10 fA (SMU220-2), 100 pA (SMU62-20)

■ Source Range ±220 V, ±2 A (SMU220-2, 2.4 W)/±62 V, ±20 A (SMU62-20, 140 W)

■ Minimum Pulse Width 100 µs, Minimum Step 700 µs

R6245/6246 DC Voltage/Current Sources/Monitors

The R6245/6246 Series are DC voltage/current sources and monitors having source measurement units (SMUs) with 2 isolated channels. 

The series covers wide source and measurement ranges.

It is ideal for measurement of DC characteristics of items ranging from separate semiconductors such as bipolar transistors, 

MOSFETs and GaAsFETs, to ICs and power devices. 

Further, due to the increased measuring speed www.cniacs.com and synchronized 2-channel measurement function, 

device I/O characteristics can be measured with precise timing at high speed which previously difficult to accomplish.

Due to features such as the trigger link function and the sequence programming function which automatically performs a series of evaluation tests automatically, the new R6245/6246 enable much more efficient evaluation tests.

 ■ High Measurement Accuracy of ±620000 Columns, 0.02%

High Measurement Resolution of 1 mV, 10 fA 

 ■ High source Accuracy of ±62000 Columns, 0.03%

 Wide source Range of ±220 V, ±20 A

 ■ High Throughput, 0.8 V/µs (At Current Measurement Range of 6 mA or more)

 ■ Wide Variety of Measurement Functions

 • 4 Phenomenon Output (Source/Sink)

 • Up to 5 V Remote Sense

 • Minimum Step 700 µs Sweep Measurement (Generation, Measurement, Data Storage)

 • Range Switching without Discontinuous Output

 • Pulse Measurement with Minimum Pulse Width of 100 µs

 • Synchronized 2-Channel Measurement Function

 • Search measurement function
April 7, 2025 BY
IN Advantest

Advantest R3272 16.5Kg 9 kHz to 26.5GHz Microwave Spectrum Analyzer

Description:

A spectrum analyzer is a broadband, very sensitive receiver.

It operates on the principle of a “super-aberrant receiver”, converting higher frequencies (usually ranging up to tens of gigahertz) into measurable quantities.

The received spectrum is slowly scanned through a series of pre-selected frequencies, which are converted to measurable DC levels (usually on a logarithmic scale) and displayed as such on the Advantest R3272’s CRT.

The CRT displays the received signal strength (y-axis) versus frequency (x-axis).

.Compact, Lightweight (16.5 kg) MicrowaveSpectrum Analyzer

.Wide Frequency Range: 9 kHz to 26.5 GHz

.Independent Function Keys Make OperationSimple

.High Stability Narrow Band Sweep Made PossibleBy DDS (Direct .Digital Synthesizer) Technology

.Newly-Developed High-Speed Settling SynthesizerGreatly www.cniacs.com Improves .Measurement Throughput

.Large, Easy-To-Read TFT Color LCD Display

.IC Memory Card, 2 SlotsJEIDA Ver. 4.2/PCMCIA 2.1

A Microwave Spectrum Analyzer With MorePortability

The R3272 was designed as an ‘active microwave spectrumanalyzer’,meeting MIL standards for shaking, dropping andshocks, It has a robust, compact design, measuring 178 (H)x350 (W)x420 (D) mm and weighing 16.5 kg. Its lightness andcompactness make it much less ofa burden when transportingit to a relay station or other site.

.User Friendly Panel Settings

Simple operation is another design concept of the R3272. Itemploys a TF’T color LCD display in order to show a variety ofinformation reliably,. The frequently used BW, INPUT ATT andSWEEP TIME setting parameters, as well as the OBW, ACP andHARM measurement finctions which are indispensable whendoing transmitter characteristics tests have been given inde-pendent keys on the front panel. This arrangement allowsdirect operation of these functions.
April 2, 2025 BY
IN Honeywell

Honeywell Aerospace Q-FLEX QA-3000 Accelerometer

For the highest inertial navigation-grade performance available in today’s market, Honeywell offers the QA-3000. 

In the same form factor as the QA-2000, Honeywell packs a lot of performance and value into this small package. 

Produced on the same manufacturing line as the QA-2000, the QA-3000 has the same inherent quality and reliability customers have come to know from Honeywell Q-flex accelerometers.

As with the entire Q-Flex family of accelerometers, www.cniacs.com the QA-3000 features a patented Q-Flex etched-quartz-flexure seismic system. 

An amorphous quartz proof-mass structure provides excellent bias, scale factor and axis alignment repeatability.

The integral electronics develops an acceleration-proportional output current providing both static and dynamic acceleration measurement. 

By use of customer supplied output load resistor, appropriately scaled for the acceleration range of  the application, the output current can be converted into a voltage.

The QA-3000 also includes a current-output, internal temperature sensor.  

By applying temperature-compensating algorithms, bias, scale factor and axis misalignment performance are dramatically improved. 

The QA-3000 has three performance grades to best meet customer’s performance requirements.

FEATURES

 • Excellent turn-on repeatability performance

 • Form, fit, function compatible with QA-2000, easy to upgrade for the most performance demanding applications

 • Remarkably low bias and scale factor repeatability

 • Environmentally rugged

 • Analog output

 • Field-adjustable range

 • Three fastener precision mounting flange

 • Internal temperature sensor for thermal compensation

 • Dual built-in self-test
April 2, 2025 BY
IN GE

IC697PCM711 Single-Slot Programmable Co-Processor Module

Description of the IC697PCM711 Module

The IC697PCM711 module is a single-slot programmable coprocessor (PCU). It is designed by GE Fanuc for use in the 90-70 series product family.

About IC697PCM711

The IC697PCM711 module is a programmable coprocessor module from GE Fanuc.

This single-slot programmable coprocessor module is part of the GE 90-70 series and has a dual-task module that can be programmed to perform different functions.

The different functions that the IC697PCM711 www.cniacs.com module can be programmed to perform include real-time calculations, operator interface functions, and data functions.

The IC697PCM711 module is used to perform operations related to storage, acquisition and communication applications.

Communication between the module and the PLC CPU is achieved via the backplane and does not require application support.

The IC697PCM711 module has multiple PCMs supported by a single IC697 PLC system and can accommodate up to 512 KB of optional expansion memory.

The IC697PCM711 module operates with an extended memory daughter board. It has a base memory with a maximum capacity of 95 KB of user memory.

The Expanded Memory Daughterboard can expand the data or programme memory to 64. 128. 512 or 2586 KB.

The IC697PCM711 module requires a 1-amp power supply, which is available from a 5-volt bus. When installed, the IC697PCM711 module should be referenced to the applicable programmable controller.

Be sure to disconnect rack power and install expansion memory where needed. In addition, it is necessary to connect the battery to either of the connectors provided with the unit.

The IC697PCM711 module can be operated without the expansion memory daughter board.

It can be programmed and configured simply by connecting an IC647 or IC640 computer or using an IBM compatible PC.
April 2, 2025 BY
IN GE

IC200MDD840 32-Point Combined Discrete I/O Module

Description: The IC200MDD840 is a 32-point combination discrete I/O module in the VersaMax I/O family, formerly manufactured by GE Intelligent Platforms and now part of Emerson Automation. The module has twenty (20) 24 VDC positive logic inputs and twelve (12) Type A 2.0 Amp rated relay contact outputs. The module has a maximum backplane current draw of 375 mA.

About the IC200MDD840

The IC200MDD840 is a component module in www.cniacs.com Emerson Automation’s VersaMax product family, formerly known as the General Electric Intelligent Platform (GE IP). The module is a combinational I/O module with embedded discrete input and output circuitry such as ten (10) positive logic 24 VDC inputs and twelve (12) A- or normally open (N.O.) contact outputs. The module has a maximum backplane current of 375 mA.

The input channels are divided into two (2) groups of ten (10) input channels each. Input characteristics include: input voltage compatibility from 0-30 VDC (24 VDC nominal); on-state voltages from +15 to +30 VDC; off-state voltages from 0 to 0.5 mA; typical on-state and off-state signal transition delays of up to 0.5 ms; and input impedance of up to 10k ohms. The input channels have configurable filtering times for both electrically and mechanically noisy input channels, eliminating false-positive and false-negative signals. These filter times include 0 ms, 1.0 ms, and 0.7 ms, with the default configuration being 1.0 ms.

The relay output channels are divided into two (2) groups of six (6) channels each. The contact outputs are rated at a minimum of 10mA per point; maximum current per module is 8.0A; 2.0 amps at 5 to 265VAC, maximum with resistive load; 2.0 amps at 5 to 30 VDC, maximum with resistive load; and 0.2 amps at 31 to 125 VDC, maximum with resistive load. Module relay types are fixed coil, moving armature, and silver alloy contact types.
April 2, 2025 BY
IN GE

IC200ALG432 Analogue module with hybrid inputs

Description The IC200ALG432 module is an analogue module with mixed inputs. It is a Versamax module manufactured by GE Fanuc.

About the IC200ALG432

The GE Fanuc IC200ALG432 module is a hybrid analogue www.cniacs.com module that uses a 10-volt DC power supply.

It is a 12-bit module with four channels and two output channels. The analogue module has an update rate of 0.4 ms and an input response time of 5 ms.

The analogue module requires an external power supply to power the outputs. The inputs of the module are powered by an external power supply for the transceiver.

The CPU in the module is responsible for processing the operation.The LEDs on the front of the IC200ALG432 module indicate the flow of power and backplane current.

There is no thermal derating with this hybrid module. the total current consumption of the IC200ALG432 module during normal operation is 160 milliamps, including load current.

The module’s diagnostic features help detect losses in the user-side power supply.

The GE Fanuc IC200ALG432 module comes with configurable alarms that can be set for different events.

During installation, the module should be protected from electromagnetic noise and airborne contaminants. The temperature of the installation area should not exceed 60 degrees Celsius.

The accuracy of the module depends on the ambient temperature. At 25 degrees Celsius, the accuracy is +/-0.3% of full scale; at 60 degrees Celsius, the accuracy is +/-0.3% of full scale.

At 60 degrees Celsius, the maximum accuracy is +/-1%. IC200ALG432 modules have a resolution of 8 counts.

The common mode voltage of the module is 0 V. The IC200ALG432 module has a bus current consumption of 60 mA when operating from a 5 V supply.
April 2, 2025 BY
IN GE

IC200PWR202 Power Module with Expansion Features

Description: The GE Fanuc IC200PWR202 module is a power supply module with extended capabilities in the Versamax family.

It has an input voltage range of 9.5 to 15 volts DC, a nominal voltage of 12 volts DC, and output voltages of 5 volts DC and 3.3 volts DC.

About the IC200PWR202

The GE Fanuc Versamax IC200PWR202 power supply module features expanded functionality with up to 3-volt DC extended power supplies.

This module does not have an isolated power supply like other power modules in the Versamax family.

This device can power backpPLC channel devices including I/O modules, CPUs, and NIUs.

It can be used as a primary or secondary power supply in a system, especially when installed on a power booster carrier.

The GE Fanuc IC200PWR202 power supply module www.cniacs.com has an input voltage range of 9.6 to 15 volts DC and a nominal voltage of 12 volts DC.

Its output voltage is 5 volts DC or 3.3 volts DC. The module has a hold time of approximately 10 milliseconds and is rated at 11 watts of input power.

The GE Fanuc IC200PWR202 power supply module has an inrush current rating of 25 amps at 12 volts DC and 30 amps at 15 volts DC.

The total output current of the IC200PWR202 power supply module should not exceed 1.5 amps. When the output voltage is 3.3 volts DC, the output current is 1.0 amp.

When operating at 5 volts DC output current, the maximum output current is 1.5 amps minus 3.3 volts used.

The power supply module is designed with reverse polarity, short circuit, and overload protection.

The dimensions of the IC200PWR202 power supply module are 49 mm (1.93 in.) x 133.4 mm (5.25 in. x 39 mm (1.54 in.), not including DIN rail or carrier height.
April 2, 2025 BY
IN GE

IC695CPE330 PACSystem RX3i Controller Central Processor

Embedded Ethernet communication ports enable controller and media redundancy, thus increasing the availability of the I/O modules. These Ethernet ports feature a dedicated microprocessor core that allows the IC695CPE330 controller to simultaneously perform up to 48 SRTP server connections and 16 Modbus®/TCP server connections with up to 32 clients (SRTP or Modbux/SRTP) per connection.

In addition, the USB 2.0 master port allows uploading and www.cniacs.com downloading of programmes using ordinary USB flash drives and smartphones. This feature makes it easy to maintain the operation of the RX3i control system.

The IC695CPE330 supports programming languages such as Ladder Diagram (LD), Structured Text (ST), Function Block Diagram (FBD), or C. The IC695CPE330 also supports communication with third-party devices through OPC UA, an industry standard that can be implemented over Ethernet IP connections.

The IC695CPE330 CPU also supports a variety of IO protocols such as PROFINET, EGD, Modbus TCP, PROFIBUS, Genius, DeviceNet, Modbus RTU, and Reflected Memory (CMX) protocols. It is part of the RX3i family of CPUs with an embedded Ethernet/PROFINET interface.

The IC695CPE330 RX3i PacSystems CPU also supports the Rackmount PROFINET Controller Module for communications.The IC695ACC402 Energy Pack, IC695ACC412 Capacitor Pack, and the IC695CBL002 Connection Cable are some of the optional accessories for this module. The module panel has 6 LED status indicators, pushbuttons, and a 3-position run mode switch for easy monitoring and operation. The CPU must be mounted in the mainframe of an RX3i PLC system to integrate with any RX3i I/O module or Intelligent Option Module. Supporting up to 32K discrete and analogue I/O points, the IC695CPE330 RX3i CPU is the best choice for multi-layer communication and handling large amounts of data in complex industrial applications.

Menu

Search for products

Back to Top
Product has been added to your cart