Category: Industry Trends

About the 1336E-B030-AN-EN-GM1-HA2-L7E

The 30 hp 1336E-B030-AN-EN-GM1-HA2-L7E drive is an Allen-Bradley AC drive that is part of the Allen-Bladley 1336 IMPACT product family.

For the Rack C 1336E-B030-AN-EN-GM1-HA2-L7E drive, the outputs and inputs are connected to TB1. which is the 11-position terminal block on the gate drive board.

National wiring codes should be considered during wiring to minimize the risk of injury and equipment damage.

The drive control interface supports TTL contacts. Encoder feedback is also provided on the drive.

The 1336E-B030-AN-EN-GM1-HA2-L7E drive is available with an output power of 22 kW or 30 hp at 380 to 480 volts AC input voltage.

Output current and apparent power ratings are 48.2 amps and 38 kVA, respectively.

The 1336E-B030-AN-EN-GM1-HA2-L7E drive draws 49 amps and 32 to 41 kVA at the input.

The input and output frequency ranges are 47 to 63 Hz and 0 to 250 Hz, respectively.

The driver output is capable of sustaining 100% of the rated current continuously or 150% of the rated current for up to 1 minute.

The maximum short circuit rating is 200.000 amps RMS symmetrical. The HMI is part of the standard driver package, which includes the controller and programmer.

Digital potentiometers are also available on the driver. The drive has an English language module. For network communications, the drive has a single point remote I/O interface.

The 1336E-B030-AN-EN-GM1-HA2-L7E drive is an open drive with an IP00 enclosure.

The recommended operating ambient temperature range is 32 to 122 degrees Fahrenheit. The drive has a shipping weight of 38.6 kg.

The dimensions of the drive rack are 701 x 301.8 x 225.0 mm.

1336E-B030-AN-EN-GM1-HA2-L7E Technical Description

The Allen-Bradley® Stratix® 5800 managed industrial Ethernet switch delivers Gigabit performance in a flexible package.

Its fixed and modular design supports a variety of copper, fiber, and PoE expansion modules, and offers Layer 2 switching or Layer 3 routing firmware options to meet a variety of application needs.

When used as a Layer 2 switch, the Stratix 5800 is ideal for high-performance end devices.

When used as a Layer 3 switch, routing can be enabled between segmented networks to improve performance and prevent unwanted network traffic.

Network segmentation helps simplify security management by establishing trust domains and improving efficiency.

The Stratix 5800 includes a robust set of switching, routing, and security features to support a wide range of architectures and uses the Cisco IOS-XE operating system to optimize compatibility with enterprise environments.

Choosing a switch co-developed by Rockwell Automation and Cisco allows your operations technology (OT) and information technology (IT) professionals to leverage the tools and techniques they are familiar with.

By helping to provide optimized integration, you can experience easier commissioning and actionable diagnostics.

Features and Benefits

– Full Gigabit switch platform High-performance networking support

– Fixed and modular options with up to 26 ports for flexibility and scalability

– Multiple copper, fiber and PoE options to support a variety of applications

– Supports Layer 2 access switching and Layer 3 routing for use in multi-tier architectures

– Supports IT and OT configuration and management tools, enabling users to leverage the expertise of both teams

– Provides default configurations for industrial applications for easy setup and optimized performance

– IEC 62443-4-2 certified for compliance with global cybersecurity standards

Optimized integration

– Studio 5000® Add-On Profiles (AOPs) enable optimal integration with Rockwell Automation® Integrated Architecture® systems.

Integration into Rockwell Automation® Integrated Architecture® Systems

– Predefined named Logix tags for monitoring and port control

– FactoryTalk® View panel for status monitoring and alarming

– Embedded Cisco® technology, including the IOS-XE operating system, facilitates secure integration with corporate networks

Our Kinetix® 5700 servo drives are designed for machines with large axes and high power requirements.

These high-performance servo drives utilize leading-edge technology designed to help you build machines that are more capable, more flexible, and more energy efficient than ever before.

The Kinetix 5700 servo drives utilize EtherNet/IP communication technology that

Complete your Logix control system with fast access to the data you need, while simplifying your system by using one network to integrate motion and safety functions.

New Features

Tuning-Free Startup and Operation

The Kinetix 5700 server’s V13 firmware has updated features that reduce or eliminate debugging efforts.

Enhancements include.

Virtual Torque Sensor feature detects anomalies and provides analysis

Adaptive tuning now includes multiple tracking trap filters and improved filter configurations.

Command trap filters reduce load oscillation in applications without load sensors

Supports 200V and 400V rated motors

OVERVIEW

High-performance Kinetix 5700 servo drives help meet the demands of demanding applications in a wide range of industries.

These multi-axis servo drives combine high-performance servo and vector motor control to help simplify machine design and reduce the time and labor costs required for integration.

Kinetix 5700 servo drives can be configured with integrated drive safety and regenerative bus power to help make your next servo solution safer and more energy efficient than ever.

Functional Features

Kinetix 5700 Servo Drive

Delivers high power density in a compact rack size

Offers a wide power range of 1.6…. .112 kW wide power range

Supports servo and induction motors with a wide range of feedback types

Features a dual-axis module

Innovative snap-in bus system for easy assembly and installation

Supports single-cable solutions for motor power and feedback

Includes dual Ethernet ports to support linear and device level ring (DLR) topologies

CIP security features support defense-in-depth approach to network security

Kinetix 5700 Integrated Safety Servo Drive

Includes integrated or hard-wired safety options

Integrated safety option reduces overall system wiring

Advanced safety features with Safe Torque Off, Safe Stop and Safe Monitor functions

The 2198-S160-ERS3 has a three-phase power output of 60.1 KW, an internal capacitance of 1120 μF, and requires 92.3 A DC input current at 458-747 V DC.

When the servomotor connected to the inverter does not have a holding option, the inverter has a control current of 4.6A at 24V DC supply.

The inverter also has a control current of 9.6A at 24V DC if the servomotor has braking enabled,.

And the inverter will receive 4A inrush current under 24V DC.

The 2198-S160-ERS3 has an operating heat sink relative to the percentage of rated output power of the inverter of

270W at 20%, 420W at 40%, 570W at 60%, 760W at 80%, and 950W at 100% of utilized output power.

Motor feedback and auxiliary feedback are provided via a 15-pin universal feedback connector (UFB) and a 2-pin motor feedback connector (MF).

and is pre-installed with an EtherNet network connection port.

The 2198-S160-ERS3 has an operating temperature range of 0-50°C (32-122°F), a non-condensing relative humidity of 5-95%, and a storage range of -40-70°C (-40-158°F).

It has a mounting height of 1500 meters (4921 feet), is not rated, and can withstand 15G operational shock and 2G vibration from 55-500Hz.

It is c-UL, CE, KC, c-TICK, ODVA, and OSHA certified and has an IP20 protected enclosure.

The 2198-S160-ERS3 weighs approximately 6.8Kg (15 lbs) and measures approximately 252mm x 478mm x 100mm (9.92″ x 18.82″ x 3.94″).