User Features

▪ Supports RX3i Hot Standby Redundancy with Ethernet (EGD) & Genius I/O.

▪ Enabled simplex PROFINET I/O controller with support for up to 32 I/O

devices and update rates of 1 – 512 ms. I/O device update rates of 8 ms

and faster are possible with 16 or fewer devices. When there are more than

16 devices configured, update rates of 16 ms and higher are available.

▪ Supports the Remote Get HART® Device Information COMMREQ, which

allows the user application to read information from a HART device

connected to an RX3i Analog module in an IC695PNS001 RX3i PROFINET

Scanner. A UDFB that automates the COMMREQ control logic is available for

download. (Refer to New Features and Enhancements for additional

information.)

▪ Configured with Sequence of Events recording through the Embedded

PROFINET Controller when used with up to four IC695PNS101 Advanced

PROFINET Scanner modules. A RX3i SoE system supports events from up to

512 SoE input points with a system storage buffer for up to 128.000 events at

a maximum rate of 400 events per second per PNS101. Each PNS101

supports SoE recording with IRIG B time synchronization of events accurate

to 1ms and buffers up to 4000 events from up to four IC694MDL660

32 Circuit Discrete Input modules. Unmodulated IRIG B time signals are

decoded by the PNS101 using either an IC695HSC304 or IC695HSC308 High

Speed Counter Module. SoE recording is available in both simplex and

redundant PROFINET systems.