Product Specifications

The DeltaV Smart Switches is based on hardware produced

by a recognized supplier of industrial-grade networking

equipment. All switches are fan-less and have redundant

power connections. Same models are also available in high

temperature, conformal coated versions for use in harsh

environments. The firmware features are identical in all models

of the DeltaV Smart Switch.

In DeltaV v13.3 and later the DeltaV Smart Switches can be

installed in the DeltaV 2.5 network or other DeltaV networks

external to the DeltaV control network (see Table 1). For

the DeltaV Smart Switches to be installed in a network, the

switches must be connected to a DeltaV workstation running

control modules. It can be installed in the DeltaV virtualization

networks only if the network is accessible to a DeltaV

workstation (virtual or physical) running control modules.

These specific control modules are required to run the DeltaV

Network Device Command Center application. DeltaV Operator

Workstations are not capable of running these control modules.