Specification

Part Number: IS420UCSBH4A

Manufacturer: General Electric

Country/Region of Manufacture: United States (USA)

Series: Mark VIe

Function: UCSB Controller

Microprocessor; 600MHz Intel

Memory: 256 MB DDR2 SDRAM

Operating System: QNX Neutrino

The IS420UCSBH4A is a controller module manufactured by General Electric as part of the Mark VIe family.

for gas turbine control systems with 1066 MHz Intel EP80579 microprocessors.

The application code is executed by a separate computer called the UCSB controller.

The controller is panel mounted and communicates with the I/O packages through an on-board 1/0 network (IONet) interface.

Only Mark controls the I/O modules and the controller, supported by a dedicated private Ethernet network called IONet.

The controller’s operating system (OS) is QNX Neutrino, a real-time multitasking operating system developed for industrial applications requiring extreme speed and reliability.

The UCSB controllers lack any application I/O hosts compared to traditional controllers that host application I/O on the backplane.

In addition, each controller has access to all I/O networks for all input data.

If a controller is rejected for maintenance or repair, the hardware and software architecture ensures that no single point of application input is lost.

Functional safety loops are implemented using www.cniacs.com Mark VIeS UCSBSIA safety controllers and Safety 2/3 modules for SIL 1 and 0 functionality.

Operators familiar with SIS applications use Mark Vles safety devices to reduce the risk of critical safety functions.

These special control hardware and software have IEC 61508 certification and are specifically configured for use with safety controllers and distributed I/O modules.

UCSB controllers offer the following benefits:

Single module

Built-in power supply

No jumper settings required

No batteries

Fanless (UCSBSIA, UCSBHIA, UCSBH4A)

Dual redundant fans with IS420UCSBH3A

Smaller panel footprint

Flash memory can be easily updated