About IC200MDD848

The IC200MDD848 module is a discrete I/O module manufactured by GE Fanuc Automation and is part of the Versamax series.

The module has 16 I/O points divided into 2 different groups, each group consisting of 8 points.

The GE Fanuc IC200MDD848 module has positive logic or source-out type inputs and supports channel-to-channel isolation for each discrete output point.

In addition, the IC200MDD848 module provides www.cniacs.com various protection features for each output point, including metal oxide varistors (MOVs) and buffers.

Although diagnostics are provided, each I/O point is mapped to a status LED.

The IC200MDD848 discrete I/O module is powered by a backplane mounted on the PLC chassis.

However, an external 120 VAC power supply is required for any switches that power the loads.

The module has a *minimum* load current of 10 milliamps per input and output point, and a **load current of 5 amps.

It also has a **5 amp load current for a single 20 millisecond cycle.

The IC200MDD848 discrete I/O module draws 5 mA from 125 V peak backplane voltage.

The use of external suppression circuitry is recommended when installing the module’s wiring and configuring the outputs for inductive loads.

The IC200MDD848 module supports thermal derating as well as various I/O combinations. The number of **active points that can be run simultaneously depends on various factors.

Some of these factors include the ambient temperature, the physical location of the DIN rail, the external voltage, and the location of the device itself.