Field Control Environmental Specifications

Vibration

Noise

Temperature

Humidity

Modules perform well where vibration is a factor. Modules are installed

on a panel-mounted DIN rail using the clamp supplied, and with the

panel-mounting feet secured. For information about vibration

standards, please see the Conformance to Standards document (GFK-1179).

Modules are resistant to noise levels found in most industrial applications

when installed according to accepted practices, including proper separation

of wiring by voltage and power level. Modules must be installed on a

conductive (unpainted) DIN rail. The DIN rail is an integral part of the

grounding system.

Modules are tested to the specifications listed in the Conformance to

Standards document (GFK-1179).

Modules operate reliably in ambient air temperatures from 0C (32F)

up to 55C (131F).

Storage temperatures are ±40C (±40F) to +85C (185F).

5% to 95%, non-condensing.