Features

• Uptoseven1.800 mm(70.8 in) vertical DIN rails for mounting of termination

assemblies (TAs) and terminal blocks for marshalling, to provide a total of 12.6 m

(41.3 ft) of linear rail space

• Ventedorsealed enclosure selection for use in ordinary (IP 43/55) or harsh (IP

55/66) rated environments

• EMCcompliantversion available — vented (IP43/55) with roof-mounted fans

• Option for redundant 480 W (P0923VD) or 960 W 24 V DCfield power supplies

• Mainpowerentry includes disconnect terminal blocks, or 10A, Type D, double

pole circuit breakers

• Optional EMC/RFI line filters for redundant main power (Triconex recommended)

• Alarmcontact terminal block assembly for door intrusion monitoring switches,

enclosure temperature switch, and field power supply status

• Optional door intrusion monitoring

• Bottomcable entry for standard power wiring and cables for Triconex termination

devices, such as External Termination Panels (ETPs), Field Terminations, and

External Termination Assemblies (ETAs)

NOTE: Duetothe placement of field power supplies, top entry is not

recommended for this enclosure.

• Available PVC or non-PVC wireways for field I/O cabling, with optional signal

segregation barrier plate

• Generous76mmx102mm(3inx4in)wireductswith adequate capacity for

most wire management

• Compactdesign to minimize use of floor space with both front and rear access

that allow maximum packaging density of control environment

• Conveniently placed eyebolts for transporting and lifting the enclosures

• A100mm(4in)plinth increases total enclosure height of 2.160 mm (85.0 in)

• Comfort handles with push button/keylocks

• Twogroundpoints; two protective ground studs, and one isolated protective

ground rail