ALL-IN-ONE

• Freely programmable in Honeywell Optimizer Workbench.

• Compact design for small enclosures and easy to install on round

and square ducts.

• Color-coded, removable terminal blocks to simplify wiring and replacement.

• Real-time clock, a supercapacitor for 24 hours data retention.

• 24 VAC power supply.

• 20 VDC at 75 mA auxiliary supply for field devices.

• 7 universal inputs/outputs usable as analog voltage/current output

or as a universal/binary input.

• All UI can be used for pulse input. Maximum frequency 100 Hz

Minimum duty cycle (50 % / 50 %) 5 ms ON / 5 ms OFF.

• RJ45 and twisted pair T1L available as IP Ethernet communication standards.

• Possibility to reuse installed wiring as IP (T1L) uses two-core twisted

pair cables with screw terminals.

• Supports fail-safe daisy chains (IP T1L only) over distances of up to 3.281 feet

(1.000 meters) at a standard speed of 10 Mbps, significantly higher than

the standard CAT5/6 distances.

• Five 24 VAC solid state relay outputs with 1.5 A continuous and 3.5 A in-rush

for 0.1 seconds (100 ms) per SSR output.

• Features a non-isolated RS-485 interface for Modbus RTU communication.

Maximum eight Modbus devices.

• Maximum 155 read or write data points for all the Modbus devices per controller.

• Maximum six high-priority registers per controller.