Agency Listings:

 CSA Certified for ordinary locations (Digital Plus only)

 CSA Class I, Division 2 component listing (standard with Analog; optional upgrade with Digital Plus)

 Marine Type Approved by Lloyds Register of Shipping for ENV1. ENV2. ENV3. and ENV4 (Digital Plus

only)

Customer Electrical Connections

ProAct Analog

The standard actuator is equipped with a 7-pin MS-style connector.

ProAct Digital Plus

The standard actuator is designed with a blank cover for use with a gland fitting or a custom connector to

be supplied by the customer. All inputs and outputs to the ProAct actuator are accessed beneath the end

cover, which is fastened with 6 M4x10 mm screws. Input power is connected to size M4 screws, and the

wires must be terminated with insulated spade or ring lugs. The I/O terminal blocks are screwless cage-

clamp-style blocks that accept wires from 0.20–3.3 mm² (24–12 AWG) wire.

Actuators with an MS-style connector mounted as an option on the end cover are also available. For

OEMs, other factory-installed connectors may also be considered.