Control specifications

Inputs

– Power Supply Low voltage models 18-32 VDC High voltage models 88-264 VAC and 90-150 VDC

– Speed: 2 passive MPUS or active proximity probes (0.5 – 32000 Hz)

– Discrete Inputs 19 configurable contact inputs (16 additional contact inputs can be added using LinkNet

HT)

– Analogue Inputs 8 configurable 4-20 mA (16 inputs or 8 RTD inputs can be added using LinkNet HT)

Outputs

– Valve/actuator driver: 2 actuator outputs, 4-20 mA or 20-200 mA

– Discrete Outputs:

– 7 configurable relay outputs (16 discrete outputs can be added using the LinkNet HT module)

– Analogue Outputs 6 programmable 4-20 mA outputs (4 inputs can be added using the LinkNet HT

module)

Communications

– Ethernet 3 ports (Modbus TCP or OPC)

– Serial 1 port (ASCII or RTU, RS-232 or RS-485)

– CAN: 4 ports, supports LinkNet HT, VariStroke, and power management devices

Operating Conditions

– Ambient air temperature: -25 to +65C

– Humidity Lloyd’s ENV2 Test #1

– Dry heat Lloyd’s ENV3

– Salt Spray: US MIL-STD-810. Method 509.2 proc. 1

– Shock: US MIL-STD-810C, Method 516.2-1 proc. 1B

– Vibration Lloyd’s ENV2 Test #1

– Resistance to particulate contamination IEC 60664-1 Class 2

– IEC 60068-2-60 part 2.60 methods 1 and 4

– Resistance to gaseous contamination: coating is resistant to NO2. CO2. SO2 and H2S.

– Battelle Laboratories Class III (IEC 60721-3-3 Categories 3C1 and 3C2)