The G123-825 Buffer Amplifier is intended to interface between the output of

standard signal sources, such as a PLC or servo amplifier, and a Moog servo

proportional valve. It accepts three types of signal input and can output most

of the Moog servoproportional valve signals. It has a single pole active filter

to remove noise from the input signal.

PLC ±10 V and 4-20 mA inputs:

The G123-825 interfaces between standard PLC analog output signals of ±10 V

and 4-20 mA on the input side and the Moog valve on the output side. This solves

the compatibility problem between these signals and the valve requirement.

Mechanical feedback (mfb) valve input:

The G123-825 interfaces between the current output of a servo amplifier, on one

side, and a Moog valve on the other. This enables old mfb valves to be replaced by

modern electrical feedback (efb) valves, without changing the servo amplifier.

The buffer amplifier takes the existing servo amplifier output and converts it

to an efb compatible signal.

Input filter:

The G123-825 has a filter to remove noise from the input signal. The filter time

constant is switch selectable. The switch selections sum, so a large variety of time

constants is available.