Silt Buster

A patented self-cleaning feature that flushes silt and debris from the servo valve. At the interval and

amplitude selected by the user, this function  provides a very rapid motion of the servo valve spool,

allowing any silt to be flushed to the drain passage. This motion is followed immediately by a step of

equal amplitude in the opposite direction. The opposing symmetry of the impulse results in no net

change in fluid volume to the hydraulic power cylinder, and thus does not interrupt the control of the

turbine. This unique feature provides a high degree of stability, reliability, and silt resistance.

Valve Rack Linearization (not currently available)

Because steam flow through single and staged inlet steam valves tends to be non-linear throughout their

flow range, turbine controls must be de-tuned to compensate for instability or sluggish control points

throughout this range. As a way of allowing turbine control optimization without detuning, the

VariStroke-II includes an 11-point linearization table to allow turbine OEMs or users to compensate for

poor valvelinea rization by digitally linearizing the control-to-valve flow relationship.

Side Load Capability

A common problem with turbine actuators is oil leaking from their output shaft due to connection to

valve rack linkages which have an arc-type of motion. This motion results in side loading of the actuator

shaft, and after long periods may result in shaft-seal wear and resultant oil leakage. Designed for a

continuous side load of up to 10% of actuator output, the VariStroke-II actuator incorporates a high-force

precision bearing and triple-seal technology on its output shaft to solve this typical application problem.