• M-2948 Tap Position Sensor directly mechanically replaces the Selsyn-Type Tap

Position Sensor.

• Directly interfaces with a 4 to 20 mA output to the M-2025D Current Loop Interface

which provides the tap position to the M-2001 Series Tapchanger Control.

• Rotation – 0 to 210°, 297°, 306°, 315°, 325°, 330°, 340° and 350° configurations

• Degrees per Tap – 9° or 10°

• Neutrals – 1, 2, 3, 5 or 6

• Rotation Direction – Tap Position Sensors are available with either a positive

or negative rotation. With positive rotation, the shaft of the M-2948 rotates

clockwise while raising taps. With negative rotation, the shaft of the

M-2948 rotates counter-clockwise while raising taps.

M-2948 Digital Tapchanger Control – Specification

Input

• +12 Vdc Power input supplied from the M-2025D

• M-2025D Transient protected to ANSI/IEEE C37.90.1-1989

Output

• 4 to 20 mA relative to tap position

• 2 digital outputs for mechanical calibration