The F810 fieldbus power system is designed to provide redundant
Foundation™ fieldbus power for Foxboro I/A Series control systems
using FBM228 modules. Eight fieldbus segments are supported. The
system comprises a baseplate which accommodates two redundant
pairs of Foxboro FBM228 modules and two Eaton F801 or F802 power
modules operating in redundant configuration. Failure alarms, galvanic
isolation, power conditioning and segment termination are incorporated
into each F80x module. In applications requiring simplex power, a single
F80x module may be used.
For extreme reliability, the module baseplate has no components and
only provides interconnections between FBM228 modules, the power
modules and external connections.
Each F80x module has indicator LEDs to show both its status and
that of the eight segments under power. In normal operation, each
green ‘Segment’ LED is lit, showing that the segment is powered. If a
segment is shorted, this LED is extinguished, and the red ‘Alarm’ LED
is lit. In the alarm condition, a normally closed, galvanically-isolated relay
contact goes to an open condition. Connections to the alarm relay are
made via screw terminals on the F810 baseplate. If multiple F810 units
are used, a common alarm circuit can be achieved by ‘daisy-chaining’
the alarm circuits.
Leave a comment
Your email address will not be published. Required fields are marked *