The F810 fieldbus power system is designed to provide redundant

Foundation™ fieldbus power for Foxboro I/A Series control systems

using FBM228 modules. Eight fieldbus segments are supported. The

system comprises a baseplate which accommodates two redundant

pairs of Foxboro FBM228 modules and two Eaton F801 or F802 power

modules operating in redundant configuration. Failure alarms, galvanic

isolation, power conditioning and segment termination are incorporated

into each F80x module. In applications requiring simplex power, a single

F80x module may be used.

For extreme reliability, the module baseplate has no components and

only provides interconnections between FBM228 modules, the power

modules and external connections.

Each F80x module has indicator LEDs to show both its status and

that of the eight segments under power. In normal operation, each

green ‘Segment’ LED is lit, showing that the segment is powered. If a

segment is shorted, this LED is extinguished, and the red ‘Alarm’ LED

is lit. In the alarm condition, a normally closed, galvanically-isolated relay

contact goes to an open condition. Connections to the alarm relay are

made via screw terminals on the F810 baseplate. If multiple F810 units

are used, a common alarm circuit can be achieved by ‘daisy-chaining’

the alarm circuits.