cniacs, Author at cniac.com

March 11, 2025 BY cniacs

IN ABB

ABB Motor Protection Relay REM610 Product Features and Applications

Product Overview

Use of the relay

The motor protection relay REM610 is a multifunctional protection relay primarily used to protect motors in various motor applications.

The relay is based on a microprocessor environment. A self-monitoring system continuously monitors the operation of the relay.

The human-machine interface includes a liquid crystal display (LCD) that makes local use of the relay safe and easy.

The relay can be controlled locally via serial communications from a computer connected to the front communication port.

Remote control is available via a serial communications bus connected to the rear connector of the control and monitoring system.

Features

* Three-phase motor start monitoring based on thermal stress calculation with speed switch blocking function

* Three-phase overcurrent protection with timing characteristics and speed switch latching function

* Three-phase short circuit protection with instantaneous or timed characteristic

* Three-phase undercurrent (loss of load) protection with timed characteristic

* Non-directional earth fault protection with timing characteristics.

* Three-phase thermal overload protection

* Three-phase unbalance protection based on negative phase sequence currents with inverse definite minimum time characteristic

* Inverted phase protection based on negative phase sequence current

* Accumulated start-up time counter with restart inhibit function

* Circuit breaker fault protection

* Temperature protection stage with timing characteristics

* Emergency start function

* Optional RTD module

* With six measurement inputs

* Supports PTC thermistors and various RTD sensors

* Three additional galvanically isolated digital inputs

* Four precise current inputs

* Time synchronisation via digital inputs

* Trip circuit monitoring

* User selectable rated frequency 50/60 Hz

* Three normally open power output contacts

* Two change-over signal output contacts

* Output contact functions can be freely configured according to requirements

* Two galvanically isolated digital inputs, three additional galvanically isolated digital inputs on the optional RTD module

* Interference recorder:

* Recording time up to 80 seconds.

* Triggered by one or more internal or digital input signals

* Records four analogue channels and up to eight user-selectable digital channels

* Adjustable sampling rate

* Non-volatile memory for

* Up to 100 time-stamped event codes

* Set values

* Interference logger data

* Time-stamped logged data for the last five events

* Operating indication messages and www.cniacs.com LEDs showing status in case of power failure

* HMI with alphanumeric LCD and navigation buttons

* Eight programmable LEDs

* Multiple language support

* User-selectable password protection for the HMI

* Display of primary current value

* Demand value

* All settings can be modified via PC

* Optical front communication connection: wireless or cable

* Optional rear communication module with plastic fibre, combined fibre (plastic and glass) or RS-485 connection.

for system communication using SPA bus, IEC 60870-5-103 or Modbus (RTU and ASCII) communication protocols.

* Battery backup for real-time clock

* Battery charge monitoring

* Continuous self-monitoring of electronics and software

* Removable plug-in unit

March 11, 2025 BY cniacs

IN ABB

ABB DSCL110A Accuray Advant Smart Platform DCS PM3 Redundant Control Unit

The ABB DSCL110A Accuray Advant Smart Platform DCS PM3 is a state-of-the-art distributed control system that combines the latest hardware, software and communication protocol technologies.

Designed for industrial automation environments, the system is designed to enable efficient and reliable automation control for control needs of varying size and complexity.

Below is a more detailed description of the ABB DSCL110A Accuray Advant Smart Platform DCS PM3:

1. **Highly integrated and scalable**:

* The system has excellent integration and can be easily integrated with existing industrial automation environments.

* According to the actual application scenarios and needs, the system can be flexibly expanded, both in terms of control scale and complexity.

2. ** Advanced control algorithms**:

* A variety of well-designed and optimised control algorithms are built-in. These algorithms can achieve precise control of industrial processes and ensure the stability and efficiency of the production process.

* Through precise control, the system can help enterprises improve production efficiency while reducing energy consumption and realising the goal of energy saving and emission reduction.

3. **Powerful communication capability**:

* The system supports a variety of communication protocols, allowing for seamless connection with various devices and systems, and high-speed data transmission and sharing.

* Through the remote monitoring www.cniacs.com function, users can understand the operating status and parameters of the system in real time, discover and solve problems in time, and ensure the continuity and stability of production.

4. **High reliability and safety**:

* Adoption of redundant design and fault diagnosis function ensures that the system can be automatically switched to the standby state in case of failure or abnormality to guarantee the continuity of production.

* At the same time, the system also has perfect data encryption and access control functions to ensure data security and privacy.

5. **Easy to use and maintain**:

* Provides an intuitive user interface, making it easy for operators to get started without the need for lengthy training and learning.

* The system is also equipped with powerful diagnostic tools that can help users quickly locate and resolve faults, reducing maintenance costs and time.

6. **Wide range of application scenarios**:

* In the field of logistics and warehousing, DSCL110A can optimise the processes of cargo handling, storage and distribution, and improve the overall logistics efficiency.

* In addition, the system can also be widely used in other industrial automation fields, such as food and beverage processing, petrochemicals, pharmaceuticals, etc., providing strong support for the intelligent transformation of enterprises.

Overall, the ABB DSCL110A Accuray Advant Smart Platform DCS PM3 is a powerful, easy-to-use and highly reliable distributed control system. It

can bring significant economic and social benefits for enterprises, helping them to stand out in the fierce market competition.

March 11, 2025 BY cniacs

IN Emerson

Emerson A6125 Dual Channel Enclosure Piezo Vibration Monitor

A case piezoelectric vibration sensor, sometimes referred to as a case absolute vibration sensor (not to be confused with a shaft absolute vibration sensor).

is an accelerometer or velocimeter whose output is acceleration or velocity.

Bearing case vibration monitors monitor the vibration of the bearing case in terms of acceleration or velocity in g (mm/sec).

Since the sensor is mounted on www.cniacs.com the bearing box, the vibration of the bearing box can be affected by many different sources.

These include rotor motion, foundation and bearing box stiffness, blade vibration, neighbouring machinery, etc.

When replacing ffeld sensors, many seismic sensors are replaced with piezoelectric sensors.

The 6125 monitor is designed for the new piezoelectric sensors.

Shell measurements are common in nuclear power applications. Case measurements using piezoelectric sensors are also common in rolling bearing machines and gearboxes.

Emerson recommends the use of piezoelectric sensors and piezoelectric sensor monitors when updating ffeld sensors and monitors.

The CSI 6500 is an integral part of PlantWeb® and the AMS Suite.

PlantWeb combines the Ovation® and DeltaV™ process control systems to provide operators with an integrated view of machine health.

The AMS Suite provides maintenance personnel with advanced predictive and performance diagnostic tools to accurately determine machine failures at an early stage.

Functional Features:

Dual-channel, 3 U-sized, 1-slot plug-in module that cuts cabinet space requirements in half compared to traditional four-channel 6U cards

API 670 compliant, hot-swappable modules

Remotely selectable limit multiplication and trip bypass

Pre- and post-buffered and proportional outputs, 0/4-20 mA outputs, 0 – 10 V outputs

Self-test features include monitoring hardware, power inputs, hardware temperature, sensors, and cables,

Hardware temperature, sensors and cables

Use with piezoelectric accelerometer and velocimeter sensors

March 7, 2025 BY cniacs

IN Parker

Parker 82C-061L Parkrimp Modular Crimper

Parkrimp Modular Crimper

The same unit is now portable and bench-mountable!

Modular design with the familiar Parkrimp system

advantages:

Parker Hose Products Division introduces two new Parkrimp Modular Crimpers – the Karrykrimp and Karrykrimp 2.

The new modular design allows customers to choose the portability that Parker Karrykrimp crimps have always offered, as well as a new option to make these crimps bench-top units.

The modular design provides users with the flexibility of a portable crimper, with the added benefit of increased productivity when connected to a stationary power unit.

Product Features

– Individual crimping units can be portable or bench mounted

– Shorter cycle times for bench-mounted units

– Increased height allows for crimping of longer bent fittings

– Cylinder maintenance now available for Karrykrimp 2

Parker’s Parkrimp® system has always led the industry in ease of use, accuracy and effectiveness.

The Parkrimp system is designed to crimp fittings to the correct diameter every time.

This means fluid power professionals won’t waste valuable time fiddling with variable settings that could produce an incorrect crimp.

The Parkrimp System crimper requires no calibration, produces an accurate crimp the first time it is used, and consistently produces the correct crimp time after time.

Parker’s Parkrimp System offers several advantages to the user:

– Perfect Alignment: Parker’s exclusive Parkalign™ system features a positive stop design that positions the joint in the die for a perfect crimp every time.

Parkalign allows the operator to “feel” that the hose is in the correct crimp position instead of “visually” checking the correct position of the fitting in a variable crimping machine.

– Efficient Design: The bottom-loading Parkrimp crimper makes it easier for operators to manage long hose assemblies.

– Linked dies: Parkrimp crimp dies are linked together to prevent misalignment or mismatch of segments.

– Colour coded dies: Parkrimp dies are colour coded by size for easy identification and reduced set-up time.

– Durability: Since its introduction in 1980. Parkrimp crimpers have been designed and manufactured to provide years of reliable service.

– Decals: Parkrimp crimpers come with informative decals that provide a list of the correct hose and fitting combinations, the tools required, and the crimp specifications for each hose and fitting combination.

March 7, 2025 BY cniacs

IN Parker

Parker Crimp Power Unit 85CE-PDP

Flexible and efficient power unit for maximum productivity in hose crimping

Maximise productivity and flexibility

The Parker 85CE-PDP Crimping Power Unit provides an efficient and flexible way to crimp hoses anywhere.

No local power or air supply is required as it can be operated with any commercially available screwdriver.

Used in conjunction with Parker crimpers Karrykrimp and Karrykrimp 2. the power unit is designed for use in agriculture, construction, and forestry.

efficiently fabricate hose assemblies for agriculture, construction, forestry and other mobile hydraulic applications.

The Crimp Power Unit 85CE-PDP is a perfect fit for 700 bar hose.

Includes male connector and handle (item no. 82CE01C9L-K-1500).

Advantages

– Operation with any commercially available cordless screwdriver (not included) (min. torque 25Nm; max. 2850 rpm)

– Built-in pressure test point

– Comfortable shoulder strap for easy carrying of tools

Product Features

– Two-stage pump; flows up to 3.2 (0.8) litres/minute

– Rated pressure 70 MPa (700 bar)

– Pressure relief valve preset to 700 bar (manually adjustable)

– Hexagonal SW13 mm drive shaft (socket not included)

– Temperature range 10°C to +35°C

– Oil capacity 2.5 litres (without oil)

– Weight 8.5 kg (incl. oil)

– L x W x H (mm) 245 x 170 x 220

March 7, 2025 BY cniacs

IN Foxboro

FOXBORO FBM233 Redundant Field Device System Integrator (FDSI) Module

The FBM233 connects to an Ethernet switch or hub to communicate with one external device or up to 64 external devices.

The combination of a pair of modules provides redundancy at the fieldbus module (FBM) level.

In this configuration, one FBM233 is the master and the other is the tracking module.

Input points on the control station are updated from device input points received on the network connected to the master.

Device output points (depending on the I/O driver) are written by both the master and the trace module.

If the I/O driver detects a problem (e.g. any device loses its heartbeat), a role switch is automatically performed, or the user can switch roles at any time via the SMDH.

Functional Features

Key features of the FBM233 include

– Redundant 10 Mbps or 100 Mbps Ethernet network transfer rates to and from field devices

– Communication with up to 64 field devices

– Downloadable I/O software drivers from available protocol libraries

– Up to 2000 DCI block connections

– Integration of field device data into the Foxboro DCS control database using an Ethernet connection

– Field Installation

– G3 rated (harsh) environments.

I/O Driver

The FBM is a general purpose Ethernet hardware module that can be loaded with different software drivers.

These drivers configure the FBM to recognise the specific protocol used by the device.

Some of these software drivers are standard products. Other custom drivers can be developed to meet specific needs.

These drivers are dynamically downloaded to the FBM233 with software code specifically designed to interface with the protocols of third party devices.

The configuration steps and software requirements for each driver are specific to the device integrated into the system.

Ethernet Link Setup

Data communication between the FBM233 and field devices takes place via the RJ-45 interface on the front of the FBM233 module.

The RJ-45 connector of the FBM233 can be connected to the field device via a hub or an Ethernet switch.

The FBM233 connects to an Ethernet switch or hub to communicate with one external device or up to 64 external devices.

Configurator

The FDSI Configurator sets up the FBM233 ports and XML-based device profiles.

The Port Configurator makes it easy to set communication parameters (e.g., Dynamic Host Configuration Protocol (DHCP), IP address) for each port.

The Device Configurator is not required for all devices, but when it is, it can configure device-specific and point-specific considerations

(e.g., scan rate, address to which data is to be transferred, and amount of data to be transferred in a single transaction).

March 7, 2025 BY cniacs

IN ABB

ABB Measurement and Analyser DHH805G Handheld Communicator

OVERVIEW

Part of ABB’s Mobility family of device handheld terminals, the DHH805 is a handheld terminal for HART® instrumentation configuration. It can connect to a wide range of devices

It supports ABB instruments and, optionally, instruments from third party suppliers.

All supported HART field devices can be configured, polled and fine-tuned using the Mobility DHH805.

As a full-featured HART communicator, the Mobility DHH805 supports generic, common and device-specific commands for commissioning, configuration and maintenance operations.

The Mobility DHH805 provides comprehensive information via a graphical dot matrix display.

It features easy-to-navigate parameter scrolling, eliminating the need to memorise online or offline device configuration menus.

The Mobility DHH805 is designed for optimum convenience and usability.

The DHH805 is aesthetically pleasing and easy to grasp, with thumb-operated buttons for one-handed operation.

Design Features

The Mobility DHH805 supports all HART devices at the generic and common command level, and all ABB and non-ABB devices at the device specific command level.

Each Mobility DHH805 comes with a lifetime subscription allowing users to update the latest device versions/definitions over time.

Device updates (updated EDDs) can be downloaded directly from the HART Foundation website.

The Mobility DHH805 supports a wide range of transmitter types including analytical, flow, level, pressure and temperature.

Device Functions

– Updates to new device configuration files and firmware via internet connection

– Dedicated memory for over 2000 HART device profiles

– Record and store over 1000 device profiles

– Clone/upload/download configurations

– Offline mode for developing/reviewing configurations

– Upload and log device configurations using DHH utility

– Backlit 6-line dot matrix graphic display

– Edit directly in review/edit mode

– HART Menu Home Key

– Programmable lock settings

– Contrast adjustment

– Elasticated hand strap and adjustable, removable suspension strap

– Customised “use in place” soft case with lead kit compartment

March 7, 2025 BY cniacs

IN Emerson

Emerson Rosemount 4088 Multivariable Transmitter

Rosemount 4088 Product Overview

Industry-Leading Performance and Functionality

Designed for optimal flow performance, the Rosemount 4088 uses superior sensor technology to deliver unmatched accuracy in a wide range of operating conditions.

Superior performance allows you to better control your operations and maximise profits.

Flexible communication with Modbus® or Bristol® standards

Asynchronous/Synchronous Protocol (BSAP)/MVS

Designed to integrate easily with existing or new systems, the Rosemount 4088 can

communicate using Modbus or BSAP/MVS protocols. Baud rates up to 19200 allow traffic computers to communicate faster and more efficiently.

The Rosemount 4088’s local LCD display shows both measurement data and the results of the flow computer’s calculations.

such as “Instantaneous Flow” or “Accumulated Flow for the last 24 hours”. This not only simplifies maintenance, but also makes well operations clearer.

Plunger Lift Measurement Range Expanded

The Rosemount 4088 extended range option incorporates new sensor technology that ensures peak flow rates are captured without compromising performance in the normal operating range.

This helps eliminate accounting discrepancies that can lead to disputes.

Reduced Power Consumption

The advanced electronics in the Rosemount 4088 consume less power, which means a single power supply or solar panel can run more transmitters.

Reverse wiring protection also ensures that transmitters are not damaged if the power supply is incorrectly connected.

Accurate RTD measurements through sensor matching

The Rosemount 4088 reduces process temperature and flow errors by using Callendar-Van Dusen constants to define the unique characteristics of RTD.

Seamless Transition from Legacy Products

To ensure a smooth transition from Emerson legacy products, the Rosemount 4088 will communicate using the same protocols as direct replacements.

This will allow users to quickly replace legacy products with the Rosemount 4088, minimising downtime and reducing engineering and installation costs.

Reduced engineering and installation costs

Excellent Warranty and Stability

The Rosemount 4088 is built to last, with a stability specification of up to 5 years and a 12-year warranty. This helps ensure that your investment in Rosemount technology continues to pay off for years to come.

March 7, 2025 BY cniacs

IN Motorola

Motorola MVME050 System Controller Module

Function

4-level priority bus arbiter

Power-on reset/front panel reset

System clock and serial clock generator

Bus timeout generator

8 28-pin sockets for EPROM/RAM

Global Interrupter

During normal operation, the MVME-050 provides all the system controller functions required for a VMEbus system.

For time access, the system software reads the time from the time clock. The system software can use two serial ports to connect to a terminal, modem or data link.

Hardcopy output is available through a Centronics-type printer port.

The EPROM/RAM socket can be used as general system memory, or to hold debug and/or diagnostic programs and scratchpad RAM.

In many multiprocessor systems, it is desirable for a process executing on one MPU module to interrupt a process executing on another MPU module.

The Global Interrupter (complete with signaller) provides this global interrupt capability.

Features

Features of the MVME050 module include.

System Controller Features.

4-1evel Priority Bus Arbiter

Power-on reset/front panel reset

System clock and serial clock generator

Bus timeout generator

Eight 28-pin sockets for EPROM/RAM

Time-of-day clock

Global interrupter

User-defined/controlled front panel display

A32/A24:D8/D16/D32 VMEbus slave interface

Front panel reset switch

Front Panel Fault Indicator and Run Indicator

March 7, 2025 BY cniacs

IN SCANLAB

SCANLAB hurrySCAN Compact Scanning Heads

Optics

Scanning mirrors and objective lenses with optimised mounts for all typical laser types and working areas.

types and working areas.

In order to make full use of the standard objective lens, the two scanning axes of the hurrySCAN® 25 have different maximum scanning angles.

This produces an elliptical image field in which the larger half-axis is perpendicular to the entrance beam axis.

Controls

All scanning heads in these series are equipped with analogue or digital standard interfaces and can be easily controlled via SCANLAB’s RTC® control panel. All scanning heads are available with an optional fibre optic data interface.

Installation regulations

The hurrySCAN® 20. 25 and 30 have threaded and unthreaded holes on the beam entry side of the housing for easy mounting of the scanning head and fibre optic output.

On the beam exit side, threaded holes are available for mounting additional components such as cross jets, illumination, distance sensors or heat shields.

Cooling

The hurrySCAN ® 20. 25 and 30 scanning heads offer water-cooled interfaces for the entrance aperture, the electronics and the galvanometer scanner, as well as air-cooling for the dedusting mirror.

This ensures constant operating conditions and excellent long-term stability, thus guaranteeing reliable operation even in high laser power applications.

The hurrySCAN ® 7. 10 and 14 are also available with optional cooling.

Options

– Expandable to a 3-axis scanning system with varioSCAN (hurrySCAN ® 20. 25 and 30 also with varioSCAN 40FLEX)

– Can be equipped with additional reference sensor systems (10 mm aperture and above)

– Available with high-performance lightweight mirrors (14 mm aperture and above)

– Scanning modules without housing available (except for hurrySCAN ® 30)

– Available with water cooling system (standard on hurrySCAN ® 20. 25 and 30)

– In extreme conditions, the scanning mirrors can be air-cooled (standard for hurrySCAN ® 20. 25 and 30)

– All scanning heads can be monitored via a camera adapter.

Quality

The high quality of SCANLAB scanning heads is the result of many years of experience in the development and manufacture of galvanometer scanning heads.

The experience gained in the development and manufacture of galvanometer scanners and scanning systems is the result of this experience. In addition, each scanning system must first pass the SCANcheck aging test before it can be shipped to the customer.

Archives

Menu

Search for products