Archives

Specifications

Mass flow accuracy (Liquid) ±0.10% of rate (standard)±0.05% of rate (optional)

Mass flow repeatability (Liquid) ±0.05% of rate (standard)±0.025% of rate (optional)

Volume flow accuracy (Liquid) ±0.10% of rate (standard)±0.05% of rate (optional)

Volume flow repeatability (Liquid) ±0.05% of rate (standard)±0.025% of rate (optional)

Mass flow accuracy (Gas) ±0.25% of rate

Mass flow repeatability (Gas) ±0.20% of rate

Density accuracy (Liquid) ±0.002 g/cm3 (±2.0 kg/m3)

Temperature accuracy±1 °C ±0.5% of reading

Sensor maximum working pressure 1.812 psig (125 barg)

Meter approvals, calibrations, and certifications

• UL

• CSA

• IECEx

• NEPSI

• ATEX

• Ingress Protection

• EMC effects

Product Description

A 316L Stainless Steel, ELITE peak performance Coriolis flow meter designed to deliver accurate,

repeatable flow measurement in the most challenging applications.

Features

• Get unparalleled measurement sensitivity and stability from this uniquely designed meter

• Gain real-time and in-process measurement integrity assurance with Smart Meter Verification

• Realize unmatched flow and density measurement performance in your most challenging liquid, gas and

slurry applications

• Achieve superb measurement confidence with the highest immunity to fluid, process and environmental

effects

• Improve scalability with a broad array of application coverage including hygienic, cryogenic and high-

pressure

• Implement the widest process-measurement range – -400°F to 662°F (-240°C to 350°C) and up to 6.000

psig (414 barg)

• Widest range of meter approvals and certifications, including; CSA, ATEX, NEPSI, IECEx,

Ingress Protection 66/67. SIL2 and SIL3. marine, and custody transfer approvals

• Choose from models available in 316L Stainless Steel, C-22 nickel alloy and super-duplex materials

• Interact with our 3D model to learn more about our ELITE Coriolis Flow and Density Meters

Micro Motion products

Emerson’s world-leading Micro Motion Coriolis flow and density measurement devices have set the

standard for superior measurement technology. Micro Motion offers the best measurement solutions for

any process challenge.

Micro Motion advantages

Technology leadership

Micro Motion is committed to technology innovations that deliver the highest-performing solutions for

your complex measurement challenges.

Widest breadth of products

Micro Motion has the widest range of flow and density measurement devices for virtually any process,

application, or fluid. A wide variety of wetted materials, line sizes, and an extensive range of output

options enable optimal system integration.

Unparalleled value

Benefit from expert field and technical application service and support made possible from more than

one millionmeters installed worldwide and over 40 years of flow and density measurement experience.

Features 

 Customized, engineered mechanical retrofit 

solutions for fossil, combined cycle, simple cycle, 

renewable, hydro or nuclear generating plants  

 Individual mechanical component upgrades 

 Comprehensive suite of mechanical services 

 Dedicated mechanical solutions project team

The team can act as a Main Automation Contractor (MAC-EPC) to manage a project with full-scope

mechanical and electrical installation and commissioning services. 

In addition to the team’s extensive experience designing, fabricating and testing both complete hydraulic

and electric actuator systems for large steam turbines, they have also completed hundreds of feed-pump

turbine control modernizations, turbine protection system upgrades and enhancements, hydro turbine

mechanical-to electronic governor conversions and hydraulic actuator rebuilds. 

To deliver the highest quality, the group uses the latest PCMM 3D laser scanning technologies to perform

as-built site verification, reverse engineer OEM components and execute installation design.  

Comprehensive service and support options are available to ensure continued optimal performance of

any Emerson installed mechanical solution. 

Emerson’s Automation Solutions Power and Water project organization includes a dedicated team

focused on mechanical solutions and services that improve equipment operation, performance and

reliability for fossil, combined cycle, simple cycle, hydro, renewable or nuclear power generators.   

Emerson’s mechanical solutions group provides a complete range of capabilities — everything from full 

conversion of older, low-pressure, mechanical governor controls to installation of modern, high-pressure

hydraulic controls, trip system upgrades, electronic overspeed protection and mechanical bolt

replacement to simple LVDT, servo valve, speed sensing and vibration monitoring system replacements.  

The team can act as a Main Automation Contractor (MAC-EPC) to manage a project with full-scope

mechanical and electrical installation and commissioning services. 

In addition to the team’s extensive experience designing, fabricating and testing both complete hydraulic

and electric actuator systems for large steam turbines, they have also completed hundreds of feed-pump

turbine control modernizations, turbine protection system upgrades and enhancements, hydro turbine

mechanical-to electronic governor conversions and hydraulic actuator rebuilds. 

Removal and Insertion

This unit cannot be removed or inserted with system

power energized.

Power must be de-energized before disconnecting

any carriers or LocalBus Extender cables.

This product must not be unplugged unless either

the system has been de-energized or the area is

known to be safe. No combination of I/O carriers and

LocalBus Extenders must exceed a length of 6.5

meters. Interconnecting cable between enclosures

must be in conduit.

Maintenance and Adjustment

This unit contains no user serviceable parts and

should not be disassembled for any reason.

Calibration is not required.

Recommended Nameplate

Lettering Spacing

The DeltaV cabinet nameplate holder is 14.05” w x 2.5” h and made of high-quality,

injection molded plastic with a polished chrome and black finish.

The nameplate holdercomes ready to mount with a die-cut adhesive backing and

also through holes for mounting with optional fasteners.

• Row A/B engraved characters should be 0.375” (9.5 mm) and show white core

• Row C engraved characters should be 0.1875” (4.76 mm) and show white core

• Engraved characters and lines of lettering should be centered on the nameplate

The DeltaV cabinet nameplate holder is 14.05” w x 2.5” h and made of high-quality,

injection molded plastic with a polished chrome and black finish.

The nameplate holder comes ready to mount with a die-cut adhesive backing and

also through holes for mounting with optional fasteners. A window in the middle

of the nameplate holder houses a 8” w x 2” h nameplate insert.

The nameplate insert is captive in the nameplate holder, but can be easily inserted and

removed if needed.

The nameplate insert is a Gravoply 2. 2-ply, black matte surface color with white

core material that is 0.062” (1.57 mm) thick. The insert can be engraved with up to three

lines of customer- supplied cabinet and or equipment identification information.

The recommended spacing for engraving is shown below.

• Standardized labeling for DeltaV™ equipment cabinets

• High quality injection molded plastic construction

• Insert provides space for three lines of information

• Insert can be easily inserted and removed if required

Introduction

The DeltaV nameplate holder and insert provides an economical and standardized

method to use for labeling and identifying DeltaV equipment cabinets.

The recommended cabinet nameplate mounting placement is shown at the right.

Product Description

The DeltaV cabinet nameplate holder is 14.05” w x 2.5” h and made of high-quality,

injection molded plastic with a polished chrome and black finish.

The nameplate holder comes ready to mount with a die-cut adhesive backing and

also through holes for mounting with optional fasteners. A window in the middle

of the nameplate holder houses a 8” w x 2” h nameplate insert.

The nameplate insert is captive in the nameplate holder, but can be easily inserted and

removed if needed.

The nameplate insert is a Gravoply 2. 2-ply, black matte surface color with white

core material that is 0.062” (1.57 mm) thick. The insert can be engraved with up to three

lines of customer- supplied cabinet and or equipment identification information.

The recommended spacing for engraving is shown below.