The X20 Compact-S series of controllers is available in different versions. In this way, the customer gets the product that best meets the requirements of the machine both technically and economically.

The processor performance of the compact controllers ranges from 166 MHz (compatible) to 667 MHz.

The most economical models are equipped with 128 MB RAM, 8 kB non-volatile RAM and a 256 MB flash drive.

The most powerful Compact-S controllers have cycle times as low as 400 µs. 512 MB of RAM, 64 kB of non-volatile RAM, and a 256 MB Flash drive.

RAM, 64 kB non-volatile RAM, and a 2 GB internal flash drive.

The controller offers a wide range of communication options via POWERLINK, Ethernet, USB and RS232. Optional RS485 or CAN interfaces are also available.

If an application requires additional interfaces, the www.cniacs.com controller can be modularly expanded with 1 or 2 X20 interface slots.

This allows the use of the entire X20 fieldbus interface product range.

The Compact-S controllers are fanless, battery-free and therefore completely maintenance-free.

– ARM Cortex-A9 processor from 166 MHz (compatible) to 667 MHz and integrated I/O processor

– Depending on model: POWERLINK with polled response chain

– 2 on-board USB

– Up to 2 module interface expansion slots

– 128 to 512 MB DDR3 SDRAM

– 256 MB to 2 GB on-board flash drive

– Fanless

– Battery-free

– Extremely compact

Coated Modules

Coated modules are X20 modules with a protective coating on the electronic components. This coating protects the X20c modules from condensation and corrosive gases.

The electronics of the modules are fully compatible with the corresponding X20 modules.

For simplicity, only pictures of uncoated modules and module IDs are used in this datasheet.

The coating has been certified to the following standards:

– Condensation: BMW GS 95011-4. 2x 1 cycle

– Corrosive gases EN 60068-2-60. method 4. exposure 21 days