Category: ABB

Product package

Contents of the product package:

• UNITROL1005 AVR

• Special red USB cable that is used to power and to connect with the AVR.

Keep this USB cable in a safe place.

• Quick installation guide and test certificate

Make sure that all of the listed items are in the product package and that there is

no damage to the items.

Mechanical installation

For detailed information on mechanical installation, refer to the User Manual.

Install the AVR in an indoor area that is dry and dust-free, and that does not

contain volatile gases, acid fumes or similar hazards.

Examine the installation area and refer to technical data to make sure that:

• The maximum ambient temperature is in the permitted range.

• The vibration is limited and within the permitted class.

• The ingress protection and pollution degree are suitable.

• The EMC environment is suitable.

Device description

UNITROL 1005 is an automatic voltage regulator (AVR) for synchronous

machines up to 80MVA. The AVR can be used for the excitation of indirectly

excited synchronous machines and motors. The AVR can also operate as a

reactive power regulator, power factor regulator or field current regulator.

Mechanical installation

For detailed information on mechanical installation, refer to the User Manual.

Install the AVR in an indoor area that is dry and dust-free, and that does not

contain volatile gases, acid fumes or similar hazards.

Examine the installation area and refer to technical data to make sure that:

• The maximum ambient temperature is in the permitted range.

• The vibration is limited and within the permitted class.

• The ingress protection and pollution degree are suitable.

• The EMC environment is suitable.

Introduction

This document is a quick installation guide for the UNITROL1005 automatic

voltage regulator. Make sure that you read and understand this document

before you install or use the product. This document is meant only as a brief

guide to the product. For detailed information on the product, refer to the User 

Manual.

Device description

UNITROL 1005 is an automatic voltage regulator (AVR) for synchronous

machines up to 80MVA. The AVR can be used for the excitation of indirectly

excited synchronous machines and motors. The AVR can also operate as a

reactive power regulator, power factor regulator or field current regulator.

Installation procedure:

1. Refer to Dimensions for the mounting hole dimensions.

2. Make the appropriate holes in the installation plate.

3. Attach the AVR to the installation plate with suitable hardware, for example,

M6 screws to a torque of 10Nm. The mounting holes have a diameter of 6.5mm.

4. Make sure that there is a good electrical ground connection between the

installation plate and the AVR. The installation plate must be electrically grounded (PE).

Mounting arrangement

When choosing a mounting arrangement, it is important to remember to place the load

cell in a direction that provides sufficient measuring force (FR) to achieve the highest possible accuracy.

There is no specific correct orientation for the load cell; it should be placed in the direction

best suited to the application, taking into account the location of the screw holes.

It is also possible to mount the load cell by suspending the roll below the load cell.

The load cell has the same sensitivity in tension and compression, 

so the load cell can be mounted in the easiest way possible.

Typical mounting methods are horizontal and inclined mounting.

Compression is the total reduction in load cell height when the load is increased from zero to the rated

value.

The total reduction of the load cell height when increasing from zero to the rated value.

Compression

Compression is the total reduction in load cell height when the load is increased from zero to the rated

value.

The total reduction of the load cell height when increasing from zero to the rated value.

Measuring principle of the load cell

The measuring principle of the load cell is based on the Pressductor® technology and

the fact that the magnetic permeability of magnetic materials changes under mechanical stress.

The load cell is a thin film machined on the load cell. The primary and secondary

windings are wound at right angles through four holes in the load cell.

The primary winding is powered by alternating current, which generates a magnetic

field around the primary winding. Since the two windings are wound at right angles to each other,

no magnetic field is generated around the secondary winding as long as there is no load on the load cell.

When the sensor is subjected to a mechanical force in the measuring direction,

the propagation of the magnetic field changes to encircle the secondary winding,

generating an alternating voltage in this winding.

The control unit converts this alternating voltage into a DC voltage proportional to the external force.

If the measuring force changes direction, the sensor signal also changes polarity.

Streamline your automation workflow

ABB GoSelect is a web-based selection, dimensioning, and

efficiency tool for motors, drives, and the AC500 PLC platform.

Start today and take your automation to the next level!

Streamline your automation projects with ease 

The intuitive ABB GoSelect web application

simplifies the  creation of PLC configurations,

allowing you to structure and organize your

PLC project topology effortlessly.

Creating and customizing configurations is

straightforward, with advanced filters making

product selection easy and efficient.

+ Built-in validation ensures correct configuration,

while the tool’s visualization capabilities provide

clear insights into networks and connections.

+ Export a detailed bill of materials which is used

to obtain a quotation and to order from ABB.

+ Generate a project report that contains

a graphical representation of the system

topology and network structure as well as

a bill of materials.

+ The tool securely stores projects in the cloud,

protects your work and enables easy access.

Improved Ethernet connectivity

• More Ethernet sockets for parallel communication

• Supporting Ethernet/IP adapter and scanner

• KNX and BACnet for smart building solutions

• IEC protocols such as 61850 and 60870 telecontrol

Certified for a secure future

• Wide range of secure protocols

A future-proof  solution

• Encrypted communication between engineering

station and PLC

• Improved encryption for user-defined libraries

Durability – secure your investment

• Compatible with existing S500 and

S500-eCo I/O modules

• No battery for storage of program or data

• Future-proof by regular software updates

• High-quality technology

Engineering efficiency

• State-of-the-art IEC 61131 editors

• Object-oriented programming

• Efficient software version management

• Powerful simple motion control library

What’s  in it for me?

Built-in performance

• Up to two integrated Ethernet ports for individual or switch use

• Processors with floating point unit (FPU)

• More CPU memory for user program and data

• HTML5 web server

Modularity and flexibility

• Scalable CPU range in three performance classes

• Smart option boards enhance the functionality

without any impact on the footprint

• Fast I/O for motion control including PTO and PWM output

Improved Ethernet connectivity

• More Ethernet sockets for parallel communication

• Supporting Ethernet/IP adapter and scanner

• KNX and BACnet for smart building solutions

• IEC protocols such as 61850 and 60870 telecontrol

Change from the predecessor to AC500-eCo V3

Every inch of the AC500-eCo V3 has been improved compared

to its predecessor.

More performance, flexibility and smarter modularity.

But above all, more user friendliness with new efficient

engineering for configuring and programming.

Change for more!

1   Updated Automation Builder engineering editors allow for efficient programming

and debugging. They support object-oriented programming and provide

state-of-the-art navigation and refactoring.

2   Thanks to the identical footprint and compatibility with existing hardware,

AC500-eCo V3 can replace its predecessor 1:1 in almost any application.

3   Benefit from enhanced connectivity and modularity due to onboard features

like Ethernet interfaces and removable smart option boards.

4   IoT-enabled devices with secure protocols allow you to share data via OPC UA and

MQTT or communicate securely via HTTPS and FTPS.

5    Automated migration of hardware configuration, visualizations and application

program code based on IEC 61131 function blocks.

End of Life Instruction

Decommissioning instructions available to enable responsible

recycling or disposal

Purpose and Basic Description

This product family is in the scope of European Union directive 2012/19/EU on Waste Electri

cal and Electronic Equipment (WEEE). The product family must be disposed according to the

legislation of the country. This the end-of-life instructions is intended for use by customers

and recycling companies which outline the responsible recycling or disposal method of the

ABB product.

Selective main circuit-breakers of the S 750 series are SMCBs based on DIN VDE 0641-21 with

voltage-independent operating principle. This means that they do not rely on a control circuit

to make or break contact (SHU) and are therefore particularly suitable for use in energy distri

bution systems with maximum availability requirements. They offer total selectivity to down

stream MCBs and outstanding selectivity to upstream protective devices due to unique cur

rent limiting selectivity.

More than 1 pole product:

In case of more than 1 pole, first, the toggle lock(1), the connecting part(2) and the two marked

rivets(3) should be removed to split the product into simple poles.

1 pole product:

On that point, all single poles will be dismantling on the same way.

Firstly, remove the rivets (only 5 rivets left in products of more than 1 pole), then you will be

able to take out the cover and access to all the internal parts.