Category: ABB

The product’s network connectivity provides a simplified interface for drive control and management, improving quality, productivity, flexibility and scalability.

Communication networks also reduce wiring costs compared to traditional I/O connections.

traditional I/O connections.

Combining these feature-rich adapter modules with ABB inverters can provide a solution for applications focused on food and beverage, material handling, printing,

rubber-plastics and textile industries OEMs and system integrators with powerful inverter solutions.

Advantages of network connectivity

– Reduced mechanical and electrical installation time

– Reduced downtime

– More data at a lower cost

– Reduced time and cost for machine expansion or relocation

– Remote data access

– Diagnostics provide predictive fault warnings

– Open protocol to interface with any major PLC

– PC tool communication through installed PLC networks

Benefits of ABB Network Connectivity

– Connects to virtually any automation architecture

– Fast and simple connection

– Products designed and tested to comply with the protocol

Testing

– First-class support resources

– FENA-21 and FEIP-21 support DLR (Device Level Ring)

End-user benefits

– Lower mechanical and electrical installation costs

– Reduced downtime

– Increased productivity

– Lower start-up costs

– Lower maintenance and diagnostic costs

– Quick access to networked hard disks via PC-based startup and maintenance software tools

Applications

The RET670 provides fast, selective protection, monitoring and control of two- and three-winding transformers, autotransformers, step-up transformers and generator transformer sets.

transformer units, phase shifters, special railroad transformers and shunt reactors.

This IED operates normally over a wide frequency range to accommodate power system frequency changes during disturbances, generator startup and shutdown.

The RET670 features fast, low-impedance differential protection with very low CT requirements. Differential protection function

Differential protection features 2nd harmonic and waveform block suppression to avoid CT saturation and transformer inrush current tripping, as well as 5th harmonic suppression.

It also has a 5th harmonic suppression function to avoid transformer overexcitation trips.

Differential functions provide high sensitivity to low-level internal faults through the use of sensitive differential protection based on amplitude measurement of the negative sequence component and direction comparison.

A variety of low impedance restricted earth fault protection functions are available as sensitive and fast primary protection against winding earth faults.

This function includes an internal/external fault discriminator for increased safety.

In addition, it has a high-impedance differential protection function. It can be used for different applications that

These include limiting earth fault protection as winding protection, autotransformer differential protection, shunt reactor protection, T-feeder protection, busbar protection and generator differential protection.

PROFIBUS networks PROFIBUS is an open serial communication standard that allows the exchange of data between all automation components.

There are three main types of PROFIBUS:

– PROFIBUS FMS (Fieldbus Message Specification)

– PROFIBUS DP (decentralized periphery)

– PROFIBUS PA (Process Automation)

The physical transmission medium of the bus is a twisted pair cable (RS-485 compliant).

The maximum length of the bus cable is 100 to 1200 meters, depending on the transmission rate.

Without repeaters, up to 32 nodes can be connected to the same PROFIBUS segment.

If repeaters are used, 126 nodes (including repeaters and a host station) can be connected to the network.

In PROFIBUS communication, the host station – usually a programmable logic controller (PLC) – selects the nodes that respond to the host’s commands.

The host can also send commands to multiple nodes in the form of broadcasts; in this case, the nodes do not need to send feedback signals to the host.

The PROFIBUS protocol is described in detail in the IEC 61158 standard.

The communication with the drives is defined in the PROFIdrive PROFILE – The PROFIBUS Profile for Adjustable Speed Drives.

FPBA-01 PROFIBUS DP Adapter Module

The FPBA-01 PROFIBUS DP adapter module is an optional device for ABB drives.

The module connects the drive to a PROFIBUS network. In a PROFIBUS network, the drives act as slaves.

The adapter module makes it possible to

– Send control commands to the drive (e.g. start, stop, run allow)

– Provide the drive with a motor speed or torque determination

– Provide the drive’s PID controller with the actual process value or the process decision.

– Read status information and actual values from the drive

– Changing drive parameter values

– Reset drive faults.

Product Overview

The FDPI-02 Diagnostic and Panel Interface is used to branch the RS-485 panel bus and chain a control panel or PC tool to multiple drives.

This interface device provides a straight-through connection between the control unit and the F-type option module.

It is compatible with the ZCU-xx and BCU-xx control units. The interface unit is installed in the option slot of the control unit.

A small F-type option module can then be mounted on top of the Interface Unit.

The Interface Unit has one RJ-11 and two RJ-45 connectors.The RJ-11 connector is used to connect to the Control Unit.

The RJ-45 connector supports a daisy-chained bus for connection to a PC or control panel (simultaneous control panel and PC communication is not allowed).

Bus termination is required to prevent signal reflection at the end of the bus cable. The interface unit has a panel/PC cable bus termination switch.

The termination switch must be in the terminated position if the device is the first or last device on the bus.

If the control panel is connected to one end of the bus, it will terminate the bus, only the other end must be terminated via termination switch S1.

The following figure shows the layout of the interface unit.

Detectors with different measurement principles for a wide range of process and emission monitoring applications

Up to five measurement components per gas analyzer

Suitable for measuring flammable gases

Automatic calibration, including pump and valve control

Simplified calibration using air or integrated calibration unit, no test cylinders required

Customizable analog outputs, digital inputs and outputs

Modbus interface

Built-in air inlet (optional)

Simple menu-driven operator interface

Clear text status messages

Configuration of rarely needed functions using the included configuration program

Housing version for 19-inch rack mounting (3 height units, IP20)    

Modular design for easy maintenance

Self-monitoring function indicates when maintenance is required

Measurement technology (analyzers)

The following analyzers are available as options:

– Uras26 infrared photometer for measurement of infrared reactive gas components such as CO, NO, SO2. etc.

– Magnos206 Oxygen analyzer for measurement of O2 or N2

– Caldos27 Thermal conductivity analyzer for measuring binary gas mixtures with different thermal conductivities. Measurement of binary gas mixtures with different thermal conductivities.

e.g. Ar in O2 , H2 in Ar, CH4 in CH4 N2

– Electrochemical oxygen sensors for O2 measurement

Electrochemical oxygen sensors can only be used in combination with the Uras26 infrared photometer. Electrochemical oxygen sensors can only be used in combination with the Uras26 infrared photometer.

Magnos206 Oxygen Analyzer and Caldos27 Thermal Conductivity Analyzer can also be used. Can also be used in conjunction with the Uras26 Infrared Photometer.

UNITROL® 1000 FLEX systems are pre-packaged solutions for applications requiring single or dual channel controllers. All systems come standard with the UNITROL® 1020 FULL, utilizing the best solution for the best price and flexible project adjustment limits.

After a quick transition to standard applications, the solution is gathering all the functionality required for excitation systems. The pre-packaged solution allows you to design the excitation system in the most flexible and cost-oriented way.

All versions are designed on a common mechanical basis with various IO and power mode options.

The system is available as a single- or dual-channel UNITROL 1020 FULL device.

By integrating the most complete product in ABB’s excitation portfolio, the standard system is ideally suited for integration into your control cabinet.

UNITROL 1020 FULL Features

All regulation types available: AVR/FCR/PF/VAR/Limiter

Automatic synchronization

MODBUS TCP communication

Rotating diode monitoring (RDM)

Reactive load distribution via RS48

Product Description

With the rapid transition to standard applications, this solution brings together all the functionality required for excitation systems. The pre-packaged solution allows you to design your excitation system in the most flexible and cost-effective way.

All versions are designed on a common mechanical basis and offer different input/output and power supply mode options.

The systems are available as single or dual channel UNITROL1020 FULL devices. By integrating the most complete range of products from ABB’s excitation portfolio, the standard system can be perfectly integrated into your control cabinet.

ABB APC03 series is a powerful and compact range of automatic capacitor banks that provide the ideal power factor correction solution for industrial and commercial applications. 

APC03 series is easy to install, operate and service while ensuring exceptional reliability, efficiency and safety. 

The key feature of APC03 series is the CLMD03 power module, the latest evolution of CLMD capacitor.

APC03 series improves the power factor in a wide variety of applications including:

 • Buildings

 • Mining

 • Steel industry

 • Chemical

 • Pulp and paper

 • Cement

 • Plastics

 • Printing

 • Food industry

Exceptional reliability and safety

Reliability and safety are key issues for capacitors. With CLMD capacitor, ABB provides the most reliable, durable and fail-safe dry capacitors on the market. It is the result of a state-of-the-art and unique protection technology.

CLMD03 Power Module and CLMD technology

CLMD03 power module is the latest evolution of CLMD capacitor. 

CLMD03 power module is all-in-one pre-wired power module, which includes capacitor – CLMD03 type, contactor, fuses and discharge resistors. CLMD03 power module provides all advantages of CLMD dry capacitor technology in a compact case,delivering high performance within a small footprint.

CLMD03 power module offers a number of exceptional properties such as: high voltage withstand capability, excellent peak current handling capacity, high capacitancestability, long life even under high electrical stress, very low losses and exceptional reliability 

and safety.

Advanced design and precision manufacturing

 —robust, long-life probe for process temperatures up to 800 °C (1472 °F)

 —proven cell design from over 50 years experience

 —fast response to process variations

 —stable and accurate oxygen measurement

 Unique integrated auto-calibration system

 —easy compliance for emission monitoring regulation

 —reduced installation costs; eliminates requirement for expensive external calibration panel

 —reduced maintenance costs

 Probe lengths up to 4.0 m (13.1 ft.) and industry-standard flange configurations

 —suitable for a wide range of applications

 —extensive installation options

 Easy cell release

 —fully site-serviceable probe

 —easy access to internal components

 Advanced transmitters

 —easy configuration, monitoring and intuitive HMI

 —HART communications

 —cell performance logging and diagnostics

Introduction

The Endura AZ20 is the latest in a long line of high-quality, combustion gas analyzers from ABB.

The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring.

Probe Lengths up to 4.0 m (13.1 ft.)

A wide range of probe insertion lengths from 0.5 to 4.0 m (1.7 to 13.1 ft.) enable installation to the optimum measuring point for accurate oxygen measurement within the duct; even in the largest flue gas ducts and stacks.

A comprehensive range of mounting flanges provide simple installation when plant-wide standard flanges are required or when replacing existing probes.

The transmitter can be probe- or remote-mounted at distances of up to 100 m (328 ft.), thus providing versatile system options for all applications. The probe-mounted transmitter option provides the lowest cost of installation. However, the remote-mounted transmitter provides flexibility when the operationally ideal probe location does not provide easy access for the user.

ABB High Voltage Induction Motors

ABB’s more than 130 years of motor manufacturing experience is the foundation of our industry-leading domain expertise.ABB high voltage induction motors combine the benefits of high reliability, availability and efficiency with customized design options to suit the most demanding industry sectors and applications. Our energy-efficient solutions enable industry to reduce its environmental impact.

ABB’s global support network makes maintenance easy throughout the product lifecycle, helping our customers optimize their cost of ownership. Proven product design and product testing ensure safe operation in the most demanding applications.

Modular motors

High voltage modular design motors offer the most reliable and optimized solution for the wide variability of most industrial applications in safe or explosive hazardous areas.

Power range: up to 23 mw

Voltage range: up to 13.8 kV

Shaft height: 355-1000 (mm)

Number of poles: 2-24

Cooling: IC01.IC31.IC611.IC616.IC666.IC81W, IC86W

Protection: IP23.IP24(W), IP55 to IP66 (Optional)

Operation: DOL, VSD

Operating environment: Safe area, Hazardous area

Core Applications.

Pumps, fans, blowers, compressors, conveyors, mills, propellers

Rib-cooled motors

ABB’s high voltage rib-cooled design motors set the benchmark for the industry, delivering more watts per kilogram than has previously been achieved with rib-cooled motors, which also allows for simple configurability and built-in maintainability.

Standards: IEC/NEMA

Power range: up to 2240 kW / 3000 HP

Voltage range: up to 11.5 kV

Shaft height: IEC 315-560/NEMA 5000-5800

Number of poles: 2-12

Cooling: IC411.IC416 / TEAC, TEFC

Protection: IP55. up to IP66

Operation: DOL, VSD

Operating environment: Safe area, Hazardous area

Core applications.

Pumps, fans, blowers, compressors, hoists, conveyors, extruders, mills, cutting, saws

AZ40

The AZ40 oxygen and combustibles analyzer continuously samples and analyses combustion waste gases to determine the levels of excess oxygen and unburned fuel (also known as combustibles and determined by measuring the carbon monoxide equivalent (COe)). Accurate measurement of both oxygen and COe is important for the safe, reliable and efficient operation of industrial combustion plant.

Close-coupled sample system

The sensor assembly is mounted on the process wall with the probe and filter assembly extending into the process gas stream. The sample is extracted from the process and fed through the sensor head using an air-powered ejector.

Oxygen analysis is made by an industry-standard zirconium oxide cell.

Carefully metered dilution air is added before unburned combustibles are measured by a high-sensitivity catalytic sensor calibrated for COe. The dilution air ensures a sufficient supply of oxygen to enable the COe sensor to function during abnormal process conditions when very low combustion oxygen levels can occur.

The close-coupled extractive system enables careful temperature and pressure control of the sensors and sample gas. This provides a stable background for target gas measurement to enhance its accuracy.

Operational safety is ensured by the inclusion of a flame arrester in the sample path to prevent flash-back if the process gas combustible level exceeds the lower explosive

limit (LEL) during start-up, shutdown, or process disturbance.

The sample path is maintained at high temperature to prevent acid gas condensation and corrosion.