Category: Industry Trends

Operating Features

• Two-line Liquid Crystal display for operation and alarm indication

• Synchroscope

• Indication of control activity and breaker state

• Multi-level password protection for parameters

• Configuration directly or via PC

• English or German language adjustable Isolated operation

• Frequency control

• Voltage control

Dead bus operation

• Closing of CB on demand

Phase match or slip frequency synchronization with voltage matching

• Two-phase sensing of generator and bus

• Selectable operating modes like SPM-A (Run, Check,Permissive, and OFF)

• Synchro-check possible

• Synchronization time monitoring

Control outputs

Standard

• Discrete raise/lower for speed

• Discrete raise/lower for voltage X & XN Packages

• Analog bias outputs for voltage and speed

freely configurable for all levels (+/-1 V,  +/

3 V, 0 to 5 V, 0.5 to 4.5 V, +/-10 V +/-5 V, 0

to 20 mA, +/-20 mA, and much more configurable)

• Speed bias output configurable as 500 Hz

PWM output with  adjustable voltage level

• Two raise/lower outputs configurable for either speed or voltage

The SPM-D10 is a microprocessor-based synchronizer

designed for use on three phase AC generators equipped

with Woodward or other compatible speed controls and

automatic voltage regulators. The SPM-D10 synchronizer

provides automatic frequency, phase and voltage matching

using either analog- or discrete output bias signals.

The HJV Package provides additional mains protection.

Part-No. 8440-1668 SPM-D1040B/XN is a direct

replacement of the SPM-A synchronizer.

DESCRIPTION

Synchronizing

Protection ANSI #

HJV Packages

• Three-phase sensing of mains voltage

• Mains over-/undervoltage  (59/27)

• Mains over-/underfrequency  (81O/U)

• Mains phase/vector shift  (78)

Control outputs

Standard

• Discrete raise/lower for speed

• Discrete raise/lower for voltage X & XN Packages

• Analog bias outputs for voltage and speed

freely configurable for all levels (+/-1 V,  +/

3 V, 0 to 5 V, 0.5 to 4.5 V, +/-10 V +/-5 V, 0

to 20 mA, +/-20 mA, and much more configurable)

• Speed bias output configurable as 500 Hz

PWM output with  adjustable voltage level

• Two raise/lower outputs configurable for either speed or voltage

APPLICATIONS

The SPM-D10 is a microprocessor-based synchronizer

designed for use on three phase AC generators equipped

with Woodward or other compatible speed controls and

automatic voltage regulators. The SPM-D10 synchronizer

provides automatic frequency, phase and voltage matching

using either analog- or discrete output bias signals.

The HJV Package provides additional mains protection.

Part-No. 8440-1668 SPM-D1040B/XN is a direct

replacement of the SPM-A synchronizer.

DESCRIPTION

Synchronizing

Protection ANSI #

HJV Packages

• Three-phase sensing of mains voltage

• Mains over-/undervoltage  (59/27)

• Mains over-/underfrequency  (81O/U)

• Mains phase/vector shift  (78)

SPECIFICATIONS

Power supply 

   [Standard] ……………………………………………… 12/24 VDC (9.5 to 32 VDC) 

   [N, XN and NYB Packages] ………………. 90 to 250Vac / 120 to 375 Vdc; 

    …………………………………… 100 to 240 Vac -15%/+10% (UL rating only) 

Intrinsic consumption …………………………………………………….  max. 10 W 

Ambient temperature (operation)……………………………………. -20 to 70 °C 

                                                     [N, XN and NYB Packages] -20 to 60 °C  

Ambient temperature (storage) ……………………………………… -30 to 80 °C 

Ambient humidity ……………………………………………. 95%, non-condensing 

Voltage……………………………………………………………………………… ( /) 

 [1] 100 Vac  Rated (Vrated) ………………………………….. 66/115 VAC 

 Max. value (Vmax) ………………………………………. 150 VAC 

 or [4] 400 Vac  Rated (Vrated) ………………………………… 230/400 VAC 

 Max. value (Vmax) ………………………………………. 300 VAC 

  Rated surge volt. (Vsurge) ………………………. [1] 2.5kV, [4] 4.0 kV 

Accuracy …………………………………………………………………………. Class 1 

Measuring frequency …………………………………….. 50/60 Hz (40 to 70 Hz) 

Linear measuring range ……………………………………………….. 1.3 x Vrated 

Input resistance ……………………………… [1]0.21 MOhms, [4]0.696 MOhms 

Current     Rated (Irated) ………………………………………. [1]…/1A, [5] … /5A 

Linear measuring range …………………………………………………….. 3.0×Irated 

Burden …………………………………………………………………………. < 0.15 VA 

Rated short-time overcurrent (1 s) …………………….[1] 50×Irated, [5] 10×Irated 

Discrete inputs ………………………………………………………………..isolated 

Input range………………………………………… 12/24 VDC or 18 to 250 Vac/dc 

Input resistance ………………………………. approx. 6.8 kOhms or 68 kOhms 

Relay outputs ……………………………………………………………………. isolated 

Contact material …………………………………………………………………… AgCdO 

Load (GP) (Vcont, relay output) AC: …………………………………. 2.00 AAC@250 VAC 

 DC: 2.00 ADC@24 VDC / 0.36 ADC@125 VDC / 0.18 ADC@250 VDC 

Pilot Duty (PD) AC: ………………………………………………………………….. B300 

 DC: 1.00 ADC@24 VDC / 0.22 ADC@125 VDC / 0.10 ADC@250 VDC 

Analog Outputs (isolated) ………………………………………….. freely scalable 

Type ……………………………………………………………± 10 V / ± 20 mA / PWM 

Insulation voltage (continuously, AVR out)………………………………… 300 VAC 

Insulation voltage (continuously, Gov out) ………………………………… 100 VAC 

Resolution …………………………………………………………………………….. 12 Bit 

± 10 V (scalable) ……………………………………..internal resistance 500 Ohms 

± 20 mA (scalable) ………………………………………. maximum load 500 Ohms 

Housing Front panel flush mounting ………… Type APRANORM DIN 43 700 

Dimensions  WxHxD …………………………………. 144 × 72 × 122 mm 

Front cutout  WxH …………………………….. 138 [+1.0] × 68 [+0.7] mm 

Connection (screw/plug terminals depending on connector) .. 1.5 mm² or 2.5 mm² 

Front ……………………………………………………………………. insulating surface 

Protection System / Sealing ………………………………………………………………  

  Front ………………………… IP42 with correct installation 

  Front …………………. IP54 (with gasket P/N 8923-1037) 

  Back …………………………………………………………. IP20 

Weight ………………………………………………………………………. approx. 800 g 

Listings tested according to applicable IEC standards …………………………..  

 ……………………………………………… CE, UL/cUL listing for ordinary locations 

Marine (Pending) …………………. LR (Type Approval), ABS (Type Approval) 

FEATURES

 Phase match or slip frequency synchronization with voltage matching 

 Two-Phase or three-phase true RMS voltage sensing of generator and bus with Class I accuracy 

 Selectable operating modes like SPM-A (Run, Check, Permissive and Off) 

 Synch-Check and synchronization time monitoring 

 Dead bus closing of CB on demand 

 2 setting blocks, each containing 7 configurable parameters (in PSY5 variants)

selectable through DI: Frequency/Voltage control dead-band,

Frequency/Voltage control time pulse, Frequency/Voltage control gain, Circuit breaker time compensation 

 Control outputs: Discrete raise/lower for speed and voltage in all variants, | X and XN variants: 

also configurable analog signals (Voltage, Current and PWM) 

 Voltage and frequency control in isolated operation 

 Two line bright liquid crystal display for operation, alarm, measuring values visualization and parametrization 

 Front face with synchronoscope and indication of breaker state/control activity 

 Multi-level password protection of parameters 

 Woodward ToolKit™ software for configuration via USB 

 Two built-in languages: English, German

The SPM-D2-10 synchronizers are available in 3 base models: 

 SPM-D2-10 … : provides 1-phase / 2-wire voltage measurement with options for analog

and/or discrete biasing signals and wide range power supply  

 SPM-D2-10 …/YB: provides 3-phase / 4-wire voltage measurement with

discrete biasing signals and option for wide range power supply  

 SPM-D2-10 …/PSY5: provides 1-phase / 2-wire voltage measurement with discrete biasing signals,

option for wide range power supply and 2 sets of switchable parameter set.

RELATED PRODUCTS 

 Load Share Synchronizer SPM-D2-11 (Product Specification # 37623) 

 Digital Synchronizer and Load Control DSLC-2 (Product Specification # 37493) 

 Master Synchronizer and Load Control MSLC-2 (Product Specification # 37494) 

 Load Share speed control 2301E (Product Specification # 03404) 

 Load Sharing Module LSM (Product Specification # 82686) 

 SPM-A Synchronizer (Product Specification # 82383) 

 Power Generation Learning Module (Product Specification # 03412): P/N 8447-1012

CE In conformity with the applicable

requirements of the following Standards

EN 61000-6-2. 2005: Generic Standards –

Immunity for Industrial Environments

EN 61000-6-4. 2007: Generic Standards –

Emissions for Industrial Environments

EN 61010-1. 2010: Safety requirements for

electrical equipment for measurement, control,

and laboratory use – Part 1: General

Requirements

Housing

Connection ………………. plug terminals 2.5 mm²

Weight …………………………………. approx. 770 g

Environmental

Ambient temp. …….. -40 to 70 °C / -40 to 158 °F

(operation, when mounted in landscape

orientation)

Ambient temp. …….. -55 to 85 °C / -67 to 185 °F

(storage)

Ambient humidity ………. 93 %, non-condensing

Vibration

5.05 G, 1 mm amplitude, 69 Hz in 3 orthogonal

planes

Generator Excitation Types

Self / Shunt Excitation, Internal / Auxiliary

Winding Excitation, Permanent Magnet (PMG),Single or Three Phase

SPECIFICATIONS

Electrical

Power consumption ………………… max. 450 VA

At max. Continuous Rating.

Max. Continuous Field Current Output CE .. 6 A

(dependent on supply voltage) for details refer

to Diagram 1

Max. Continuous Field Current Output UL .. 4 A

according to UL 6200

Max. Forcing Field Current Output ………… 10 A

(for 10 s)

Max. AC Voltage Input  ……………….. 250 Vrms

(X1:X2. Z1:Z2)

Max. DC field output voltage ……………. 350 Vdc

PWM Input Signal ………… 500 Hz, 5~20 V DC

PWM duty cycle …………………………….. 0~100%

Approvals

UL 6200 ………………………….  File No: E335643

Salient Features

✓ Eliminate redundant voltage and current sensing

o No PT/CT connection to the AVR

✓ Simplify voltage control topology

o No cascaded PID loops

✓ Compatible with all types of synchronous generators

o Shunt, Auxiliary Winding, PMG Excitation

✓ Standard simulation files available to speed-up design/certification process

• Simple plug and play excitation module

• Easy and convenient to install, operate, and diagnose

• No extra configuration tool required

• On-board protection schemes: Current limitation, Short circuit, Over temperature

• Status LEDs for local annunciation

• Seamless integration with easYgen 3400/3500XT genset controls

• Active voltage Regulation (AVR)

• Soft start control

• Under frequency (Volt / Hz) regulation

• Voltage droop compensation

• Compact design

• Line drop compensation

• Fault Ride Through (FRT) support

• UL/cUL 6200 and CE Compliance