Category: Industry Trends

Features and benefits

• The CI867A can be set redundant and supports hot swap.

• CI867A is a single channel Ethernet unit; Ch1 supports full duplex with 100 Mbps speed. Both master

and slave functionality are supported.

• A maximum of 70 slave and 8 master units per CI867A can be used.

MODBUS TCP is an open industry standard widely spread due to its

ease of use. It is a request-response protocol and offers services

specified by function codes.

MODBUS TCP combines the MODBUS RTU with standard Ethernet

and the universal networking standard TCP. It is an applicationlayer

messaging protocol, positioned at level 7 of the OSI model.

The CI867A/TP867 is used for connection between an AC 800M

controller and external Ethernet devices using Modbus TCP

protocol.

MODBUS TCP is an open industry standard widely spread due to its

ease of use. It is a request-response protocol and offers services

specified by function codes.

MODBUS TCP combines the MODBUS RTU with standard Ethernet

and the universal networking standard TCP. It is an applicationlayer

messaging protocol, positioned at level 7 of the OSI model.

The CI867A/TP867 is used for connection between an AC 800M

controller and external Ethernet devices using Modbus TCP

protocol.

The CI867 expansion unit contains the CEX-Bus logic, a

communication unit, and a DC/DC converter that supplies

appropriate voltages from the +24 V supply via the CEX-Bus. The

Ethernet cable must be connected to the main network through an

Ethernet switch.

The CI867A only uses one Ethernet port (100 Mbit/s) compared

with the earlier CI867. where two Ethernet ports could be used (100

Mbit/s and 10 Mbit/s). The CI867A module will only work with

System 800xA 6.0.3.3. 6.1.1. and subsequent versions.

If there is a need to have access to FF process variables in the AC

800M controler, connectivity between the HSE subnet and the

contro ler is established with the CI860 – the Communication

Interface FOUNDATION Fieldbus HSE.

Then FOUNDATION Fieldbus process data on HSE can be accessed

from the IEC 61131 applications in the AC 800M controlers. For this

purpose, the CI860 module maps the value and status parts of the FF

signals to the IEC 61131 application and vice versa.

The CI860 is powered by the processor unit, via the CEX-Bus, and

therefore does not require any additional external power source.

Features and benefits

• The CI860 can be used in redundant mode

• Up to twelve CI860 modules can be placed at one AC800 M also in redundant mode, and each of them

can be connected to the same or to a separate FOUNDATION Fieldbus HSE subnet.

• The ABB FOUNDATION Fieldbus Linking Device LD800HSE/LD 800HSE EX acts as a gateway between

the HSE subnet and up to four separate H1 links.

Features and benefits

• MB 300 network redundancy

• Clock synchronization

• DataSet communication

• Hot swap

• Per to peer communication

The MasterBus 300 (MB300) communication protocol used in

communication between controllers, and operator stations in

installations based on Advant OCS with Master software is also

implemented in the System 800xA controller AC 800M. MB 300

communication is realized in AC 800M by communication

interface CI855. which is connected to the CEX-Bus through a

baseplate.

The baseplate, TP853. houses RJ45 connectors for two Ethernet

ports, for network redundancy and provides a simple DIN-rail

mounting.

A key benefit of the CI855 interface is the possibility of having

peer-to-peer communication between new plant sections with

System 800xA using the AC 800M controller and existing sections

with MB 300-based controllers like Advant Controller 410. Advant

Controller 450. and MasterPiece 200/1.

ABB provides an extensive selection of support documentation

for planning including dimension drawings in different formats,

EPLAN P8 macros and line apparatus selection tool for selecting

external components on the line side and motor side of the

drive.

Main features

− Optimized for easy and cost efficient cabinet installation

− Enclosure class IP20

− Compact design for easy installation, commissioning and

maintenance

− Side-by-side mounting

− Built-in EMC filter (as option), choke (as standard) and

braking chopper (as option for frame sizes R5 to R9) will

reduce design effort and makes installation easy

− Direct torque control (DTC) as standard, for high performance

motor control

− Integrated safety including safe torque off (STO) as standard

and the optional safety functions module, FSO-12 (TÜV Nord

certified)

− Supports various motor types including synchronous

reluctance motors

− Intuitive control panel with USB connection

− Removable memory unit for easy maintenance

− Drive composer PC tool for commissioning and configuration

− Primary control program – common software used throughout

the ACS880 drive series

− Control unit supporting a wide range of fieldbuses, feedback

devices and input/output options

− Coated boards as standard

− Controllable cooling fan

− Incoming air temperature measurement for protecting the

drive from different temperature related failure mechanisms

− du/dt filter option for motor protection

Optimized for cabinet assembly

All our modules (frame sizes R1 to R9) are built-on ABB’s

common drives architecture for easy commissioning and

use. At the heart of the drive is direct torque control (DTC),

ABB’s premier motor control technology. To optimize the use

of cabinet space, the ACS880-01 modules can be mounted

side by side inside the cabinet. Because the drive module has

built-in EMC filter, choke and braking chopper, design effort

is reduced and installation is made easy. The extensive range

of built-in and external options include EMC filters, encoders,

resolvers, du/dt filters, sine filters, chokes and brake resistors,

as well as application-specific software. Built-in safety features,

such as safe torque off (STO), reduce the need for external

safety components. Multiple drives can be daisy-chained for

synchronized drive-to-drive communication. With the panelbus

feature, several drive modules inside a cabinet can be accessed

and operated using one common control panel. Our offering

also covers an option for flange mounting with IP55 back

side protection. In flange mounting the control electronics

are separated from the cooling airflow for better thermal

management.

Our all-compatible ACS880-01 single drives support easy

and cost efficient cabinet installation with option +P940. The

optimized module design makes cabinet installation easy and

minimizes the need for cabinet space, while providing all

compatible features in one compact drive module. The power

range is from 0.75 to 4250 hp and the voltage range is from

230 to 690 V. The enclosure class is IP20 as standard.

These single drive modules are customized to the precise needs

of industries such as oil and gas, mining, metals, chemicals,

cement, power plants, material handling, pulp and paper,

sawmills and marine. They are designed to control a wide range

of applications including cranes, extruders, winches, winders,

conveyors, mixers, compressors, pumps and fans. With the panelbus

feature, several drive modules inside a cabinet can be accessed

and operated using one common control panel. Our offering

also covers an option for flange mounting with IP55 back

side protection. In flange mounting the control electronics

are separated from the cooling airflow for better thermal

management.