Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Category: Industry Trends

Home / Industry Trends (Page 72)
March 12, 2025 BY
IN GE

SR469-P5-LO-A20-T Relay Protector Module

Product Description

The SR469-P5-LO-A20-T is an SR469 multi-wire relay designed to provide comprehensive protection for medium to large motors. The unit offers many management features.

The SR469-P5-LO-A20-T has a 5 amp current transformer secondary coil mounted on the base unit.

It is a low control power unit rated for 24-60 volts DC or 20-48 volts AC @ 48-62 Hz.

Although the unit has an optional www.cniacs.com Ethernet port, it does not include the optional DeviceNet or enhanced front panel.

In addition, it is not designed for harsh environments as it does not include a chemically conformal coating.

The SR469-P5-LO-A20-T includes an optional Ethernet 10BaseT Ethernet port.

With this additional port, users can connect their 469 units to 10 Mbps Ethernet.

This port brings the number of ports in the unit to four, including the three standard serial ports that are always displayed in the SR469 relay.

All SR469 relays have two RS485 ports on the real panel. In addition, there is an RS232 port on the bottom of the front panel.

This port provides quick access for troubleshooting and programming.The SR469-P5-LO-A20-T supports ModBus RTU and ModBus RTU via TCP/IP.

The GE Multilin manual will provide the user with additional information on installation, safety and proper operation.

Original documentation such as manuals and user guides should be read and understood before opening the box; this will ensure that you are aware of all possible hazards and ensure your safety.

Frequently Asked Questions about the SR469-P5-LO-A20-T

What are the standard features of the SR469-P5-LO-A20-T General Electric Motor Management Relay?

All 469 Motor Management Relay features are standard. Although the analogue output range, phase current transformer secondary and control power must be specified prior to purchase, the

to ensure that the correct standard features are purchased for the relay. Some features are programmable, such as the 469 relay’s differential current transformer input with a 1A or 5A secondary current transformer.
March 12, 2025 BY
IN SST

SST Molex SST-PB3-SLC Communication Module

Quickly Connect Rockwell SLC 500 Systems to PROFIBUS Networks and Maximise Network Flexibility with SST™ Communication Modules

The SST™ Communication Module connects Rockwell SLC 500 PLCs as a master or slave to scan or emulate PROFIBUS DP I/O.

With a user-defined data space of 2064 bytes of input and 2064 bytes of output, the SST™ Profibus Module provides the ability to connect SLC CPUs to large PROFIBUS networks.

A 9-pin serial port on the scanner can be used for field firmware upgrades and I/O configuration uploads.

SLC processor logic scanning and PROFIBUS I/O scanning are independent of each other. the SLC processor reads the scanner’s input data during input scanning and writes the output data during output scanning.

The SLC processor reads input data from the www.cniacs.com scanner during input scanning and writes output data during output scanning. The scanner reads input data from the slaves and writes output data to the slaves independent of the operation of the SLC.

Slave status, diagnostic status information for all slaves, network diagnostic counters and DP master diagnostic counters are maintained by the scanner.

A G-file is required in the SLC.

Features and Benefits

100% backward compatible with previous generation (SST-PFB-SLC)

Manages DP-V1 services, including SLC ladder logic sampling

M0 and M1 data areas doubled up to 1000 words

PROFIBUS DP master configuration software

Supports all PROFIBUS baud rates

Simultaneous operation of PROFIBUS DP masters and slaves

For storing DP

Master I/O configuration

Quick and easy installation on the SLC backplane, PROFIBUS I/O data is automatically mapped to the I/O files of the SLC processor and to the MO and MI files residing on the PB3-SLC.

Supports export of configuration files from SST DP Configuration Software and Siemens COM PROFIBUS

Multiple SST-PB3-SLC modules can be used in one SLC rack
March 12, 2025 BY
IN MOOG

MOOG L180 Programmable Servo Driver

The L180 servo drive is used to control MOOG brushless servo motors.

These are three-phase motors with 8 or 12 poles (4 or 6 pole pairs) with bipolar resolvers.

The L180 servo drive is fully digital. The high-performance torque and speed control meets all requirements for fast response and high control accuracy.

The digital control allows full diagnostics, motor parameter adjustment, data and fault detection using a PC-based graphical user interface (GUI).

The L180 servo drive features the following:

Power supply

– Single-axis unit that includes a regenerative module to minimise wiring and space requirements.

– 230 V three-phase or single-phase.

– Optional: External filter in the power supply is CE compliant.

– The drive is designed to Protective Extra Low Voltage (PELV) standards. An autotransformer is sufficient for the mains input.

Power Driver

– Galvanic isolation between control and power electronics.

– IGBT output stage.

– Digital PWM current loop provides low ripple motor current and high motor efficiency.

Digital Controller

– Fully digital servo drive for brushless motors with resolver.

– Easy software download via RS232 serial connection.

– Temperature regulated fan cooling.

– Multi-loop control (torque and speed).

– Sine current output ensures smooth www.cniacs.com torque and performance at low speeds.

– 7-segment status indicator for diagnostic display.

User Inputs

– ±10VDC differential analogue input for speed or current commands.

– RS232 serial port.

– Limit switches for bi-directional overrun protection.

– Optional external 24VDC power supply for control and interface boards in the event of a mains power failure.

User Outputs

– Programmable incremental encoder analogue output with 1 to 2048 ppr resolution (extrapolated), differential RS 422 line driver output.

– Programmable supervisory relays to indicate ready, alarm or enabled status.

Protection Features

– The power stage is short-circuit and thermal protected.

– Motor thermal protection through I²t limiting and thermistors.

– Detects resolver faults and motor wiring faults.
March 12, 2025 BY
IN Woodward

Woodward 9907-164 Digital Microprocessor Controller

Woodward Unit 9907-164. from 505 Digital Microprocessor Controller for Steam Turbines with Single or Split Range Actuators.

Product Description.

The unit listed here is model 9907-164 and is part of the 505 and 505E microprocessor based governor control units.

These control modules are specifically designed to operate steam turbines, turbine generators and turbo-expander modules.

The 505/505E series was originally developed, produced and manufactured by Woodward.

Woodward is the oldest industrial manufacturer in the United States, founded in 1870. and remains one of the leading industrial companies in the marketplace.

The 9907-164 unit is designed to control a steam turbine by operating a single extraction and/or intake of steam from the turbine.

It utilises the turbine’s staged actuators (either one or both) to actuate the steam inlet valve.

As with any 505 governor module, the unit can be configured in the field by a field operator.

The menu-driven software is controlled and changed by an operator control panel integrated into the front of the unit. The panel displays two lines of text with 24 characters per line.

The 9907-164 is equipped with a range of www.cniacs.com discrete and analogue inputs:16 contact inputs (of which 4 are dedicated and 12 programmable) followed by 6 programmable current inputs, 4 to 20 mA.

Standard features of the 9907-164 include critical speed avoidance, valve limiter, automatic start sequence, and shutdown first-out indicator.

Prepare for an emergency stop when starting an engine, turbine, or other type of prime mover to prevent personal injury from loss of control or overspeed.
March 12, 2025 BY
IN Reliance

Reliance 45C920 115/230 VAC AC Power Module

Product Description.

The 45C920 unit is a power supply module manufactured by Reliance Electric for the Shark XL series.

Reliance Electric’s Shark XL is now a legacy series.

The 45C920 power module is one of three power modules in the Shark XL series.

The other two power modules are models 45C921 and 45C922.

The 45C920 power supply module, along with all other Shark XL power supply modules, is a must-have in a Shark XL rack.

The module has a number of terminals on www.cniacs.com the faceplate, all of which are individually labelled for connection to the incoming power cord.

The 45C920 power module comes with additional 24 VDC terminals for powering output circuits.

The 45C920 power module is rated for 115/230 VAC.

The 45C920 Power Module will connect to the smallest baseboard connector on the Shark XL rack in which it is installed.

The module is compatible with any Shark XL test tube rack.

On the side of the 45C920 power module, you will find an AC input power jumper and a green jumper below it.

To the left of the green jumper, there is a fuse.
March 11, 2025 BY
IN ABB

ABB Motor Protection Relay REM610 Product Features and Applications

Product Overview

Use of the relay

The motor protection relay REM610 is a multifunctional protection relay primarily used to protect motors in various motor applications.

The relay is based on a microprocessor environment. A self-monitoring system continuously monitors the operation of the relay.

The human-machine interface includes a liquid crystal display (LCD) that makes local use of the relay safe and easy.

The relay can be controlled locally via serial communications from a computer connected to the front communication port.

Remote control is available via a serial communications bus connected to the rear connector of the control and monitoring system.

Features

* Three-phase motor start monitoring based on thermal stress calculation with speed switch blocking function

* Three-phase overcurrent protection with timing characteristics and speed switch latching function

* Three-phase short circuit protection with instantaneous or timed characteristic

* Three-phase undercurrent (loss of load) protection with timed characteristic

* Non-directional earth fault protection with timing characteristics.

* Three-phase thermal overload protection

* Three-phase unbalance protection based on negative phase sequence currents with inverse definite minimum time characteristic

* Inverted phase protection based on negative phase sequence current

* Accumulated start-up time counter with restart inhibit function

* Circuit breaker fault protection

* Temperature protection stage with timing characteristics

* Emergency start function

* Optional RTD module

* With six measurement inputs

* Supports PTC thermistors and various RTD sensors

* Three additional galvanically isolated digital inputs

* Four precise current inputs

* Time synchronisation via digital inputs

* Trip circuit monitoring

* User selectable rated frequency 50/60 Hz

* Three normally open power output contacts

* Two change-over signal output contacts

* Output contact functions can be freely configured according to requirements

* Two galvanically isolated digital inputs, three additional galvanically isolated digital inputs on the optional RTD module

* Interference recorder:

* Recording time up to 80 seconds.

* Triggered by one or more internal or digital input signals

* Records four analogue channels and up to eight user-selectable digital channels

* Adjustable sampling rate

* Non-volatile memory for

* Up to 100 time-stamped event codes

* Set values

* Interference logger data

* Time-stamped logged data for the last five events

* Operating indication messages and www.cniacs.com LEDs showing status in case of power failure

* HMI with alphanumeric LCD and navigation buttons

* Eight programmable LEDs

* Multiple language support

* User-selectable password protection for the HMI

* Display of primary current value

* Demand value

* All settings can be modified via PC

* Optical front communication connection: wireless or cable

* Optional rear communication module with plastic fibre, combined fibre (plastic and glass) or RS-485 connection.

for system communication using SPA bus, IEC 60870-5-103 or Modbus (RTU and ASCII) communication protocols.

* Battery backup for real-time clock

* Battery charge monitoring

* Continuous self-monitoring of electronics and software

* Removable plug-in unit
March 11, 2025 BY
IN ABB

ABB DSCL110A Accuray Advant Smart Platform DCS PM3 Redundant Control Unit

The ABB DSCL110A Accuray Advant Smart Platform DCS PM3 is a state-of-the-art distributed control system that combines the latest hardware, software and communication protocol technologies.

Designed for industrial automation environments, the system is designed to enable efficient and reliable automation control for control needs of varying size and complexity.

Below is a more detailed description of the ABB DSCL110A Accuray Advant Smart Platform DCS PM3:

1. **Highly integrated and scalable**:

* The system has excellent integration and can be easily integrated with existing industrial automation environments.

* According to the actual application scenarios and needs, the system can be flexibly expanded, both in terms of control scale and complexity.

2. ** Advanced control algorithms**:

* A variety of well-designed and optimised control algorithms are built-in. These algorithms can achieve precise control of industrial processes and ensure the stability and efficiency of the production process.

* Through precise control, the system can help enterprises improve production efficiency while reducing energy consumption and realising the goal of energy saving and emission reduction.

3. **Powerful communication capability**:

* The system supports a variety of communication protocols, allowing for seamless connection with various devices and systems, and high-speed data transmission and sharing.

* Through the remote monitoring www.cniacs.com function, users can understand the operating status and parameters of the system in real time, discover and solve problems in time, and ensure the continuity and stability of production.

4. **High reliability and safety**:

* Adoption of redundant design and fault diagnosis function ensures that the system can be automatically switched to the standby state in case of failure or abnormality to guarantee the continuity of production.

* At the same time, the system also has perfect data encryption and access control functions to ensure data security and privacy.

5. **Easy to use and maintain**:

* Provides an intuitive user interface, making it easy for operators to get started without the need for lengthy training and learning.

* The system is also equipped with powerful diagnostic tools that can help users quickly locate and resolve faults, reducing maintenance costs and time.

6. **Wide range of application scenarios**:

* In the field of logistics and warehousing, DSCL110A can optimise the processes of cargo handling, storage and distribution, and improve the overall logistics efficiency.

* In addition, the system can also be widely used in other industrial automation fields, such as food and beverage processing, petrochemicals, pharmaceuticals, etc., providing strong support for the intelligent transformation of enterprises.

Overall, the ABB DSCL110A Accuray Advant Smart Platform DCS PM3 is a powerful, easy-to-use and highly reliable distributed control system. It

can bring significant economic and social benefits for enterprises, helping them to stand out in the fierce market competition.
March 11, 2025 BY
IN Emerson

Emerson A6125 Dual Channel Enclosure Piezo Vibration Monitor

A case piezoelectric vibration sensor, sometimes referred to as a case absolute vibration sensor (not to be confused with a shaft absolute vibration sensor).

is an accelerometer or velocimeter whose output is acceleration or velocity.

Bearing case vibration monitors monitor the vibration of the bearing case in terms of acceleration or velocity in g (mm/sec).

Since the sensor is mounted on www.cniacs.com the bearing box, the vibration of the bearing box can be affected by many different sources.

These include rotor motion, foundation and bearing box stiffness, blade vibration, neighbouring machinery, etc.

When replacing ffeld sensors, many seismic sensors are replaced with piezoelectric sensors.

The 6125 monitor is designed for the new piezoelectric sensors.

Shell measurements are common in nuclear power applications. Case measurements using piezoelectric sensors are also common in rolling bearing machines and gearboxes.

Emerson recommends the use of piezoelectric sensors and piezoelectric sensor monitors when updating ffeld sensors and monitors.

The CSI 6500 is an integral part of PlantWeb® and the AMS Suite.

PlantWeb combines the Ovation® and DeltaV™ process control systems to provide operators with an integrated view of machine health.

The AMS Suite provides maintenance personnel with advanced predictive and performance diagnostic tools to accurately determine machine failures at an early stage.

Functional Features:

Dual-channel, 3 U-sized, 1-slot plug-in module that cuts cabinet space requirements in half compared to traditional four-channel 6U cards

API 670 compliant, hot-swappable modules

Remotely selectable limit multiplication and trip bypass

Pre- and post-buffered and proportional outputs, 0/4-20 mA outputs, 0 – 10 V outputs

Self-test features include monitoring hardware, power inputs, hardware temperature, sensors, and cables,

Hardware temperature, sensors and cables

Use with piezoelectric accelerometer and velocimeter sensors
March 7, 2025 BY
IN Parker

Parker 82C-061L Parkrimp Modular Crimper

Parkrimp Modular Crimper

The same unit is now portable and bench-mountable!

Modular design with the familiar Parkrimp system

advantages:

Parker Hose Products Division introduces two new Parkrimp Modular Crimpers – the Karrykrimp and Karrykrimp 2.

The new modular design allows customers to choose the portability that Parker Karrykrimp crimps have always offered, as well as a new option to make these crimps bench-top units.

The modular design provides users with the flexibility of a portable crimper, with the added benefit of increased productivity when connected to a stationary power unit.

Product Features

– Individual crimping units can be portable or bench mounted

– Shorter cycle times for bench-mounted units

– Increased height allows for crimping of longer bent fittings

– Cylinder maintenance now available for Karrykrimp 2

Parker’s Parkrimp® system has always led the industry in ease of use, accuracy and effectiveness.

The Parkrimp system is designed to crimp fittings to the correct diameter every time.

This means fluid power professionals won’t waste valuable time fiddling with variable settings that could produce an incorrect crimp.

The Parkrimp System crimper requires no calibration, produces an accurate crimp the first time it is used, and consistently produces the correct crimp time after time.

Parker’s Parkrimp System offers several advantages to the user:

– Perfect Alignment: Parker’s exclusive Parkalign™ system features a positive stop design that positions the joint in the die for a perfect crimp every time.

Parkalign allows the operator to “feel” that the hose is in the correct crimp position instead of “visually” checking the correct position of the fitting in a variable crimping machine.

– Efficient Design: The bottom-loading Parkrimp crimper makes it easier for operators to manage long hose assemblies.

– Linked dies: Parkrimp crimp dies are linked together to prevent misalignment or mismatch of segments.

– Colour coded dies: Parkrimp dies are colour coded by size for easy identification and reduced set-up time.

– Durability: Since its introduction in 1980. Parkrimp crimpers have been designed and manufactured to provide years of reliable service.

– Decals: Parkrimp crimpers come with informative decals that provide a list of the correct hose and fitting combinations, the tools required, and the crimp specifications for each hose and fitting combination.
March 7, 2025 BY
IN Parker

Parker Crimp Power Unit 85CE-PDP

Flexible and efficient power unit for maximum productivity in hose crimping

Maximise productivity and flexibility

The Parker 85CE-PDP Crimping Power Unit provides an efficient and flexible way to crimp hoses anywhere.

No local power or air supply is required as it can be operated with any commercially available screwdriver.

Used in conjunction with Parker crimpers Karrykrimp and Karrykrimp 2. the power unit is designed for use in agriculture, construction, and forestry.

efficiently fabricate hose assemblies for agriculture, construction, forestry and other mobile hydraulic applications.

The Crimp Power Unit 85CE-PDP is a perfect fit for 700 bar hose.

Includes male connector and handle (item no. 82CE01C9L-K-1500).

Advantages

– Operation with any commercially available cordless screwdriver (not included) (min. torque 25Nm; max. 2850 rpm)

– Built-in pressure test point

– Comfortable shoulder strap for easy carrying of tools

Product Features

– Two-stage pump; flows up to 3.2 (0.8) litres/minute

– Rated pressure 70 MPa (700 bar)

– Pressure relief valve preset to 700 bar (manually adjustable)

– Hexagonal SW13 mm drive shaft (socket not included)

– Temperature range 10°C to +35°C

– Oil capacity 2.5 litres (without oil)

– Weight 8.5 kg (incl. oil)

– L x W x H (mm) 245 x 170 x 220

Menu

Search for products

Back to Top
Product has been added to your cart