Category: Woodward

Woodward’s easYsim simulation tool revolutionizes power system testing by creating digital

twins of complex setups, including gensets, breakers, and renewable integrations such as

Battery Energy Storage Systems (BESS) and photovoltaic (PV) systems.

Standard models are designed for cost-effective training and onboarding,

making it safer and more economical to test on virtual systems. Custom scenarios

simplify commissioning by enabling precise testing of applications with

specific single-line diagrams. EasYsim supports system behavior testing,

load sequencing, synchronization, and grid failure simulations,

helping to reduce costs and streamline project timelines.

Product Variants

• 10-059-783 easYsim – 3 MONTHS ACCESS (NO SUBSCRIPTION) used for one Email address

• Custom scenarios available upon request

• Your single line diagram (* requires a minimum level of software engineering)

• Controllers like LS-6XT, GC-3400XT-P1. DSLC-2XT, MSLC-2XT, easYi, easYgen-3000XT Series

LS-6 Breaker Controller

Woodward’s easYgen | LS-6XT control is a synchronizer controller with integrated mains decoupling

and protection features. It enables several redundant communication schemes with peer controls.

The applications range from independent synch check relay to complex power management system

with multiple utility feeds, bus tie breakers and group breakers in combination with Woodward’s

easYgen-3400XT/3500XT equipped genset controllers and/or easYgen | GC-3400XT equipped genset

groups.

Redundant busses running among the peer controls ensure that availability of your power generation

asset is not compromised to a single point of failure.

The LS-6XT control together with easYgen-3000XT controls are designed to support OEM switch-gear

builders, generator packagers, and system integrators standardize on a single hardware for a multitude of

utility parallel or island operations. Off-the-shelf LS-6XT control is software configurable for one/two

breaker control, gensets / genset groups handling, and stand-alone/multi-unit application. The LS-6XT

controller is available in a rugged aluminum powder coated housing. An LED Annunciator plate is

integrated to the front for local annunciation of alarms that are customizable on-site. Woodward RP-

3000XT is supported over a separate Ethernet network that works as remote operator control panel.

Woodward’s LS-5 and LS-6XT breaker controllers deliver accurate synchronization,

integrated mains decoupling, and robust protection features for complex power

management systems. Designed for flexibility, these controllers support diverse applications,

ncluding utility parallel and island operations, with software-configurable options for breaker

control and synchronization. Featuring redundant communication schemes,

intuitive integration with easYgen genset controllers, and rugged housing options,

the LS-5 and LS-6XT ensure reliable and scalable solutions for OEM switchgear builders,

generator packagers, and system integrators.

Features and Functionality

• Compatible with the easYgen-3000XT and 3500XT (software revision >2.10x required)

• Compatible with group controller

• Synchronize forward and backward with easYgen-3000xt

• Segment control for load sharing

• Protection elements (including ROCOF, phase shift, and flexible limits for custom protection)

• RS-485 interface for remote control and visualization

• Synch-check operation without easYgen-3000xt

• Phase angle compensation

• Minimum gensets (with group controller) = 496

• Maximum gensets (without group controller) = 32

• Custom alarms

Additional features available based on the model of the breaker.

Features and Functionality

• Compatible with the easYgen-3000XT and 3500XT (software revision >2.10x required)

• Compatible with group controller

• Synchronize forward and backward with easYgen-3000xt

• Segment control for load sharing

• Protection elements (including ROCOF, phase shift, and flexible limits for custom protection)

• RS-485 interface for remote control and visualization

• Synch-check operation without easYgen-3000xt

• Phase angle compensation

• Minimum gensets (with group controller) = 496

• Maximum gensets (without group controller) = 32

• Custom alarms

Additional features available based on the model of the breaker.

LS-5 Breaker Controller

Woodward’s LS-5 Series relays are synchronizer controllers with integrated mains de-coupling

and protection features. The applications range from independent synch check relay to

complex power management with multiple utility feeds, bus tie-breakers and group breakers

in combination with Woodward’s easYgen-3400XT/3500XT equipped genset controllers.

Wiring efforts are reduced to a minimum, since only one CAN bus connection is required

between all LS-5 and easYgen controllers to transmit AC measurement signals, I/O states, flags, etc.

The LS-5×1 devices manage synchronization, loading and un-loading on each bus segment

and send the required voltage, frequency and phase angle references via CAN bus to the

easYgen-3400XT/3500XT genset controllers. When serving an incoming mains breaker it

automatically detects mains failure, performs mains decoupling and sends the start signal

to the easYgen. The LS-5×1 is software selectable to be applied as an independent synch

check relay, mains circuit breaker control or bus tie-breaker control thereby providing exceptional

versatility and value for OEM switchgear builders, generator packagers, and system integrators.

The LS-5×1 Series is available in two different mounting styles. An LS-521 with a plastic housing

and graphic LCD display is designed to be mounted on the cabinet’s front door.

An LS-511 with an aluminum powder coated housing without display is designed to be back panel

mounted.

 Engineered for Wood ward Power Manage ment controls to save on field engineering

 Two operation modes:

1. miniSCADA: connect multiple controllers to visualize system level performance

2. remoteHMI: detail connections to single controllers

 Connect one easYview to many controllers in miniSCADA mode or one controller

to many easYview in remoteHMI mode

 Achieve considerable customizations by tunables only

 Full customization using a versatile atvise ® SCADA tool

 Offers on-the-fly  configuration with same  security levels as  the connected control

 Simplifies wiring to  the access door and keeps high voltage  connections remote

 Ethernet communication to the connected control

 Personalization by end user

 CE Marked, UL Listed

APPLICATION OVERVIEW

The easYview comes prepared with two basic application modes: a remoteHMI mode and a miniSCADA

mode.

 In the remoteHMI mode, the easYview connects to one or more devices via VNC connection and

receives

the remote HMI screens of the connected easYgen-XT or LS-6XT devices. Depending upon the easYview

screen size (7’, 10’ or 15’), 1. 2 or 4 different remote HMI screens can be shown simultaneously.

This mode is suitable for detailed connection to a single controller and helps troubleshoot,

commission, parametrize, Alarm/event log etc.

 In the miniSCADA mode, the easYview connects to multiple easYgen-XT or LS-6XT devices via Modbus

TCP connection and offers a plant level visualization. This mode is designed to keep operators informed

during regular operation and maintenance to visualize most frequent / favorite values often from system

perspective without going into details. The miniSCADA mode also has a built-in remoteHMI capability.

Off-the-shelf easYview comes prepared with 3 easYgen-3000XT controllers in island or utility parallel

operation.

Tunables are available for customizations such as, deleting an easYgen, changing color of live bus bar,

changing utility source data etc. However, for any major customization such as adding an easYgen-XT,

LS-6XT or 3rd party device, adjusting single line diagram, etc, an atvise® Builder tool is required.

Features

   Off-the-shelf easYview supports two operation modes,

   miniSCADA – multiple easYgen-XT and/or LS-6XT connects via Modbus TCP connection. Data struc

ture prepared for a total 6 devices (3x easYgen-XT and 3x LS-6XT).

   remoteHMI – VNC connection to single controllers. Depending upon the easYview screen size (7’, 10’

or 15’), 1. 2 or 4 different remote HMI screens can be shown simultaneously

   Engineered to achieve a range of customizations using tunables and online keyboard

   Further customization using atvise® SCADA tool under password protection (see AN#37949)

   PC mode to free the license from easYview Hardware and perform customizations using a PC

   VNC connection also supported in miniSCADA mode for detailed visualization of single controllers

   Possible to connect multiple easYview to single controllers in remoteHMI mode

   List of available devices in network with a search filter option

   Auto connection setting to the last connected device(s)

   Customizable remoteHMI connection in full mode, annunciator mode or deactivate

   Neutral bezel and field replaceable Logos for customer branding (see AN#37946)

   Multi-lingual remoteHMI screens of the connected controller

DESCRIPTION

Woodward’s easYview is a family of visualization touch-panels designed for system level visualization. It is

customized to provide users a miniSCADA visualization solution for a fleet of gensets controlled by

Woodward power management controllers. It is particularly useful for switchgear builders, genset

packagers and system integrators as an off-the-shelf HMI option for any application where a secure

remote control, monitoring, and visualization are desired such as hospitals, data centers, offshore rigs,

landfill, rental, and wastewater gas-to power applications to name a few.

easYview is available in three display sizes keeping the digital core constant but expanding the touch

display from small (7”) and medium (10”) to large (15”) screens. Combined with a versatile atvise® SCADA

software tool, it makes an excellent multi-device visualization system as device connections (easYgen-XT

family and LS-6XT to start with) are already made and data structure is already set-up to help minimize

your engineering effort while providing flexibility that is expected from a scalable platform. VNC is

supported across the easYview family for detailed connection to single controllers making it ideal not only

for commissioning and troubleshooting your PowerGen assets but also for operating and maintaining

them later. Additionally, extended operating

temperature range combined with strict ingress protection, wide viewing angle, anti-glare treatment and strong

Luminance makes it as good for outdoor use as for indoor installations.

Features

• Engineering Time Savings: Leverage Woodward’s pre-engineered software with consistent

object orientation in the engineering of data structures and graphic objects

• Simple and Easy to Use: Intuitive web-visualization engineering tool without Web-Knowledge

• More Clients: the easYview server allows you to embed the visualization into 3rd party SCADA

or run it via web-clients on various devices like a central industrial PC or laptop

• Customization: plenty of room for customization including easy connectivity to

other systems through open interfaces

• Scalable: for different screen sizes

• Full Functionality: All developer features can be used in full, without any restrictions.

The full atvise software license is included in each easYview hardware