Category: ABB

New HMI module for the RTU560 product line ABB’s RTU560 product line offers the 560HMR01.

an integrated human-machine interface (HMI) board that requires no extra space, no extra power supply,

and no external PC.

The 560HMR01 comes with firmware and Windows 7 operating system in a rugged, space-saving design.

The integrated HMI functionality provides extensive diagnostic and maintenance capabilities to ensure

reliable system operation.

Advantages

– Plug and play: pre-installed operating system for immediate use of the integrated HMI

– Integrated solution: no separate PC or laptop required

– Reusable redundant power supply for the RTU560

– Easy wiring: all connectors are located on the front panel

– Monitor, keyboard and mouse can be connected to the RTU560

– Maintenance-free: no rotating parts (ventilators and hard disk drives)

– Space saving: 90% less space required compared to a 19-inch industrial PC

– Cost-optimized solution for station monitoring, control and diagnostics

The new 560HMR01 makes station control on RTU racks very simple and convenient:

The integrated PC module offers a wide range of monitoring, diagnostic and maintenance functions.

RTU560 communication module with 32-bit CPU

– 6 serial communication interfaces (RS-232 or RS-485) for remote communication

– 2 Ethernet interfaces (10/100BaseT)

– 1x USB port

– 1x serial peripheral bus

– Battery buffered real-time clock

New HMI module for the RTU560 product line ABB’s RTU560 product line offers the 560HMR01.

an integrated human-machine interface (HMI) board that requires no extra space, no extra power supply,

and no external PC.

The 560HMR01 comes with firmware and Windows 7 operating system in a rugged, space-saving design.

The integrated HMI functionality provides extensive diagnostic and maintenance capabilities to ensure

reliable system operation.

I/O Controller (IOC)

The microcontroller on the module handles all critical tasks for the parameterized processing functions. In addition, it communicates interactively with the RTU I/O bus.

All configuration data and processing parameters are loaded by the communication unit via the RTU I/O bus.

The module is equipped with a serial interface to the RTU560 I/O bus on the backplane.

The binary output unit performs the following processing functions for individual signal types:

– Control of command output duration

Command monitoring function:

– Checking of output relays on the module (m out of 16)

– Monitoring of the output bit pattern by reading back the output status

– Monitoring of the switching voltage before and during output (24 V DC coil voltage)

– Command output duration monitoring

During initialization and operation, the module performs a series of tests. If a fault occurs, it will be reported to the communication unit.

All fault conditions affecting the function of the module are signaled as common faults by the red LEDs. Module faults are detected by the communication unit.

Binary outputs

The binary outputs utilize relay contacts.

The 16 outputs are divided into two groups. Each of the 8 outputs has a common circuit. The groups are isolated from each other and from the internal electronics.

The relay coil supply voltage (24 VDC) is switched by an internal relay (R17).

The relay coil supply voltage (24 VDC) is monitored internally before and during the command output.

Command outputs to the process equipment can be executed either directly or in conjunction with the command output monitoring module.

The command output monitoring module is responsible for checking the output circuits (1 out of n times). For more details, refer to the Command Output Monitor datasheet.

The following modules with command output monitoring functions are supported:

– 23BA23 (60 VDC maximum)

The 1.5-pole command output can only be used in conjunction with the command output monitoring module. When using the 1.5-pole command output, the

One of the output relays of the 560BOR01 switches the command to the intermediate relay. Process voltage of the intermediate relay

The process voltage of the intermediate relay is switched by the command output monitoring module.

For 2-pole commands, two output relays are required for each command.

Alternatively, using additional booster relays connected to the command output monitoring module 23BA23.

Direct switching of process relays with high switching capacity on electrical devices (disconnectors, circuit breakers) (see data sheet 23BA23).

The module 560BOR01 performs several command monitoring functions before and during command output.

These tests ensure correct output. These tests can be further refined with the Command Output Monitoring module.

If the command monitoring reveals a fault, the command is canceled. Release relay R17 will only energize the output relay if the test is successful.

A faulty drive or a faulty release relay R17 will result in a complete failure of the command output module.

Built to control power – in industry, utilities and traction

ABB is a globally active company with full process know-how

in a wide field of industrial, utility, traction, marine and other

applications. As a result, the AC 800PEC is a key controller

for ABB’s own range of industrial applications, and also for

third party products and systems.

The AC 800PEC is an efficient and flexible controller family.

Thanks to its short cycle times, fast I/O, high processing

power and advanced control using MATLAB® / Simulink®, the

AC 800PEC:

− Increases process quality and output

− Saves development and engineering costs

− Reduces the energy consumption of your products

− Shortens time-to-market for your development project

− Saves headcount and resources in engineering and

software development

− Enhances Return on Assets (ROA)

The modular structure of the AC 800PEC control system

means it can adapt to any application size, from the largest

industrial plants and propulsion systems down to very

compact products where space and cost are critical.

All over the world, many thousands of processors are now

proving their worth in a wide variety of extremely demanding applications.

The AC 800PEC, the ultimate approach for high demands

The AC 800PEC provides the unique combination of features

required in demanding applications:

− Short cycle times down to 100 μs

− High processing power

− Fast communication and I/O

− Programming tools:

− System engineering with IEC61131-3 languages using

ABB’s Control Builder, either as Compact or Profes sional version

− Product & control development using MATLAB® /

Simulink® for model-based design, easily bridging the

gap from simulation to implementation

− Full integration into ABB’s System 800xA

− Innovative and flexible use of FPGAs to include protocols

and application functionality in the devices without

creating additional processor load

− Optical communication

− Industrial grade hardware with no moving parts

− Long life cycle, easy upgrading

Can you imagine a process with a cycle time of less than 100 μs?

We can – and we’ve built the AC 800PEC to achieve it

High-performance applications with extremely fast control

algorithms – cycle times that range from 100 microseconds

for fast control loops to seconds for long-term operational

transients – require specialized control devices.

That is why we have designed the AC 800PEC, extending the

capabilities of ABB’s well-known ControlIT automation

technology to handle the very high-speed algorithms of

processes such as power electronics applications. We’ve

even gone a step further: now, a single processor unit

combines these high-speed controls with the low-speed

process control tasks usually carried out by separate PLC units.

To facilitate the implementation of control algorithms, the AC

800PEC can be programmed using MATLAB® / Simulink® –

the code is automatically generated from the model and can

be downloaded without manual interaction.

Embedded into a robust and flexible system structure with

integrated standard communication, the AC 800PEC is

unique in the field of industrial process controllers.

Product Details

General Information

Product ID: 3BHE004385R0001

Catalog Description: UNS 0884a, V1: Current Sensor 2000A

Long Description: UNS 0884a, V1: Current Sensor 2000A

Additional Information

Country of Origin: Switzerland (CH)

Customs Tariff Number: 85371092

Gross Weight: 0 kg

Invoice Description: UNS 0884a, V1: Current Sensor 2000A

Made To Order: No

Minimum Order Quantity: 1 piece

Order Multiple: 1 piece

Package Level 1 Gross Weight: 0 kg

Package Level 1 Units: 1 piece

Part Type: New

Product Net Depth/Length: 230 mm

Product Net Height: 50 mm

Product Net Weight: 2 kg

Product Net Width: 165 mm

Product Type: Undefined

Selling Unit of Measure: Piece

Stocked At (Warehouses): Baden, Switzerland

WEEE Category: Product Not in WEEE Scope

NE810 is an Industrial switch made for harsh environments. Due to

our multi-rate SFP solution, the switch can be used in either 100

Mbit or Gigabit networks. Our unique FRNT (Fast Recovery of

Network Topology) technology is the fastest protocol on the

market to re-configure a network in case of any link or hardware

failure. That is why NE810 is also used in safety-critical applications

such as tunnels, traffic signal control, and railway systems.

Installations in harsh environments and places with heavy electrical

interference require the use of reliable media. NE810 provides a

number of solutions using fiber optic transceivers. Multi- or singlemode

transceivers can be used to build point-to-point or

redundant ring networks with ranges up to 120 km between each

switch. Our BIDI transceiver, which transmits and receives data on

a single fiber can be used in applications where the number of fiber

cores is limited.

Real-time properties are implemented in the switch in order to

achieve determinism for real-time critical applications. NE810

supports QoS (Quality of Service) with four priority queues and

strict priority scheduling as well as HoL (Head of Line Blocking

Prevention). All to assure that the data network is deterministic.

Features and benefits

• Pre-configured for use with System 800xA

• NE810 supports redundant power connection

• Enhanced monitoring using PNSM

• Industrial Ethernet 10-port switch

• Long life duration

• Fully supported by ABB

NE810 is an Industrial switch made for harsh environments. Due to

our multi-rate SFP solution, the switch can be used in either 100

Mbit or Gigabit networks. Our unique FRNT (Fast Recovery of

Network Topology) technology is the fastest protocol on the

market to re-configure a network in case of any link or hardware

failure. That is why NE810 is also used in safety-critical applications

such as tunnels, traffic signal control, and railway systems.

Installations in harsh environments and places with heavy electrical

interference require the use of reliable media. NE810 provides a

number of solutions using fiber optic transceivers. Multi- or singlemode

transceivers can be used to build point-to-point or

redundant ring networks with ranges up to 120 km between each switch.