About the DS200ITXDG1ABA

The DS200ITXDG1ABA board is labeled as a Dynamic Brake Buffer Board and is part of the Mark V Series manufactured by General Electric.

The Mark V Series, of which this DS200ITXDG1ABA product is a part, was one of the last of General Electric’s Mark product line to incorporate Speedtronic control system technology into its various products.

And since it was eventually discontinued many years after its initial release, it exists as a legacy product line.

This DS200ITXDG1ABA Printed Circuit Board, or PCB for short, is not an original development for its specific Mark V Turbine Control System family of functional roles; it is actually the DS200ITXDG1 Parent Dynamic Brake Buffer Board.

The DS200ITXDG1ABA PCB is conspicuously missing all three versions of the three important product versions of the DS200ITXDG1ABA PCB.

The assembly of this DS200ITXDG1ABA PCB has been specifically altered to utilize a Level A Major Function Revision, a Level B Minor Function Revision, and a Level A Drawing Configuration Revision.

Hardware Tips and Specifications

The required operation of the IXTD board is provided through the circuitry of the connected power supply/interface board (IMCP). When the IMCP and the IXTD board are connected, they are connected via a four-pin connector.

When the board is installed, it will be externally mounted and must be sized to meet the worst-case switching requirements of dynamically braked IGBTs.

The purpose of the snubber board is to be used to limit voltage transients at both ends of the IGBT and at all known operating conditions of the driver.

Another function of the DS200ITXDG1ABA board is to regulate the output of the IGBT gate driver board to match the electrical characteristics of the AT frame driver.

AT frame drivers are available in variable and constant torque applications. The drive output current rating for variable torque applications is 500 ARMS.

The DS200ITXDG1ABA board has three connector types: bus I/O connectors, input connectors for DBPL, and board pin connectors.

All of these connector types have different pin numbers, nomenclature, and descriptions, which are explained in depth and in detail in the DS200ITXDG1ABA instruction manual included above for your convenience.