Eaton’s Current Limiting Reactor (CLR) is a power conditioning system that limits

fault current under short-circuit conditions, helping to support overall NFPA-70E

and NFPA-75 safety. The CLR is to be installed between a switchboard and

switchgear and will be electrically connected to them with flexible busbar

connectors.

Ratings

• Amperage: 600 – 6300A

• Input specs: 3-phase, 3 or 4 wires + ground

• Input and output voltage:

• @ 50 Hz: 415. 400. 380VAC

• @ 60 Hz: 480. 415. 400VAC

Enclosure

• NEMA 1

• Frame ground

• Enclosure front infrared door (input and output terminal) smallest footprint in the industry

Optional side cabinet

Provides space for a cable distribution with bracket.

• 24”W x 36”D

• 30”W x 36”D

• 24”W x 48”D

• 30”W x 48”D

Temperature monitor

• Temperature: thermocouples, normally open and normally close on each single-phase

reactor with terminal block at the top of the units for fast installation.

• Optional PT100 sensor

• Input specs: 3-phase, 3 or 4 wires + ground

Operating conditions

• Operating temperature: ambient 0°C to 40°C

• Storage temperature: ambient -10°C to +40°C

• 50 Hz operating range: 47-53 Hz

• 60 Hz operating range: 57-63 Hz