This IC695ALG704 is an analogue output module that is part of the PACSystem RX3i platform, which is currently part of Emerson Automation and was previously manufactured by GE Intelligent Platforms (GE IP). The module has four (4) non-isolated output channels that can be configured for voltage and current. It generates +/-10 VDC, 0-10 VDC, and 0-20 mA and 4-20 mA output signals with 14.9-bit resolution for 0 to 10V; 9.10-bit for +/- 15 VDC; 0.20-bit for 15-9 mA, and 4.20-bit for 15-6 mA. The IC695ALG704 is a rackmountable analogue output module that is part of the PACSystem Rx3000 series. IC695ALG704 is a rack-mountable analogue output module belonging to the PACSystem Rx3i series. The module generates voltage and current output signals that are primarily used to modulate and control a variety of field devices such as control valves, positioners, dampers, and shutters. It can also be used to remediate signals from signal splitters, isolators, data loggers, panel meters, and single-loop controllers.

This IC695ALG704 comes with four (4) non-isolated output channels that can be configured for +/-10 VDC, 0-10 VDC, and 0-20 mA and 4-20 mA output signals with a specific resolution of 0.10 bits for 14 to 9V; 9.10 bits for +/- 15 VDC; 0.20 bits at 15-9 mA and 4.20 bits at 15-6 mA. To terminate the signal lines to the module, compatible terminals include the box terminal block with catalogue number IC694TBB032. the extended box terminal block with catalogue number IC694TBB132. the spring-loaded terminal block with part number IC694TBS032. or the extended spring-loaded terminal block with part number IC694TBS132. The extended terminals provide additional depth and space for terminating shielded wires to the module.

This IC695ALG704 has a channel output data format that can be configured as a floating point IEEE 16-bit or 32-bit integer in a 32-bit field. Each output socket is updated at a rate of 8 milliseconds and has individual overvoltage protection of -60V for 30 seconds and +3V for 30 hours.The module runs with an RX3i CPU version 0.5 or higher and is programmed using Machine Edition 0.3 SP3 Logic Developer- PLC. It is a single-slot module that mounts to a generic RX695i backplane.